Belt Drive Cabinet Blowers
Models DM and DMS
Models DM and DMS are belt drive, forward curved inline duct
blowers. These all purpose blowers provide an economical
solution to many air moving requirements. Model DM is
designed for indoor use and available with 7", 9", 10", 12", 15"
and 18" blowers. Model DMS is designed for indoor or outdoor
use and available with 9", 10", 12", 15", and 20" blowers. DM
and DMS are available as single or twin units.
DM
With Optional Filter
Construction Features
Forward curved wheels for operation at low RPM's
•
Attractive green enamel finish
•
Access panels on both sides for convenient servicing
•
Keyed shafts on both ends
•
Options/Accessories
Filter Section
•
Intake Hood
•
Heating and Cooling Coils
•
Vibration Isolation
•
Ceiling & Cabinet Exhausters
DMS
Fan
Model
DM07 18.00 15.38 23.00 46
DM-T07 36.00 15.38 23.00 145
DM09 21.00 18.00 23.00 58
DM-T09 42.00 18.00 23.00 163
DM10 22.25 20.00 24.75 69
DM-T10 44.50 20.00 24.75 190
DM12 27.00 23.00 27.50 89
DM-T12 54.00 23.00 27.50 240
DM15 33.50 28.00 32.00 175
DM-T15 67.00 28.00 32.00 345
DM18 41.50 34.00 44.00 205
DMS09 21.00 18.00 23.00 64
DMS-T09 42.00 18.00 23.00 171
DMS10 22.25 20.00 24.75 74
DMS-T10 44.50 20.00 24.75 198
DMS12 30.13 24.75 34.00 175
DMS-T12 60.13 24.75 34.00 390
DMS15 33.75 28.63 38.13 214
DMS-T15 67.63 28.63 38.13 467
DMS18 41.50 34.00 44.00 370
DMS-T18 83.38 34.00 44.00 750
DMS20 44.75 41.13 57.50 575
DMS-T20 89.50 41.13 57.50 1200
Weight in pounds less motor and drives.
Dimensions are shown in inches.
DIMENSIONS
AB C
Est. Ship
Wt.
For more information on this product contact your sales support.
Page 47