“WARNING” – Risk of fire or electric shock. Kit installation requires knowledge of
fluorescent lighting luminaries electrical systems. If not qualified, do not attempt installation.
Contact a qualified electrician.
“WARNING – Risk of Fire or electric shock. Install this kit only in the luminaries that has
the construction features and dimensions shown in the photographs and/or drawings”
“Do not make or alter any open holes in an enclosure of wiring or electrical components
during kit installation”
“WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects”
“WARNING – After the luminaire has been modified, it can no longer accept original
lamp(s). Have a label affixed (provided by the retrofit manufacturer), indicating the
luminaire has been modified and can no longer operate the original intended lamp(s).
“WARNING” – Risk of fire or electric shock. Kit installation requires knowledge of
fluorescent lighting luminaries electrical systems. If not qualified, do not attempt installation.
Contact a qualified electrician.
“WARNING – Risk of Fire or electric shock. Install this kit only in the luminaries that has
the construction features and dimensions shown in the photographs and/or drawings”
“Do not make or alter any open holes in an enclosure of wiring or electrical components
during kit installation”
“WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects”
“WARNING – After the luminaire has been modified, it can no longer accept original
lamp(s). Have a label affixed (provided by the retrofit manufacturer), indicating the
luminaire has been modified and can no longer operate the original intended lamp(s).
FCC statement: This Product may cause interference to radio equipment and should not be
installed near maritime safety communications equipment or other critical navigation or
communication equipment operating between 0.009-30 MHz.
This device complies with Part 18 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Loading...