ACI-Automation Components TRANSMITTERS Data Sheet

Automation Components, Inc.

TRANSMITTERSTEMPERATURE

Featured Transmitter Product

Duct

Strap

Outdoor Air

Duct w/o Box

Immersion w/o Well

Raw Potted Sensor

Raw, 6’ Leads

Copper Averaging

Bullet Probe

Rigid Averaging

TRANSMITTERS

General Mounting

ACI offers a comprehensive selection of general mounting configurations for Transmitters (see list
above). These sensors provide a predictable and accurate output over the specified temperature range.
Each sensor configuration is designed and manufactured for long-term quality and performance. ACI
incorporates standard features such as double encapsulation and etched Teflon leads where applicable.
The ACI A/TTM Series offers a matched calibration of the sensor & transmitter, which improves the
measurement accuracy. An N.I.S.T. certificate is provided with all A/TTM Series devices. Robust,
high-end performance in addition to N.I.S.T certification makes this series suitable for applications
such as pharmaceutical or scientific laboratories.

Automation Components, Inc. Made in the USA

23

TRANSMITTERSTEMPERATURE

Automation Components, Inc.

SPECIFICATIONS

Supply Voltage
Output Current
Transmitter Transmitter Input
Transmitter Transmitter Output
Calibrated Accuracy
Temperature Effect
Transmitter Operating Temperature
Transmitter Operating Humidity
Minimum Calibration Span
Operating Temperature Range
Sensor Outputs
Product Dimensions

8.5 to 32 VDC | 249 Ohm Load: +13.5 to 32 VDC | 499 Ohm Load: +18.5 to 32 VDC
25 mA
2-wire Platnium 100/1K Ohm Class A RTD
2-wire, Linear 4 to 20 mA DC Current (standard), 1 to 5 VDC, or 2 to 10 VDC
+/-0.2% of full scale for spans <500
+/-.02% of full scale for spans >100

-40 to 185
0-90% RH non-condensing
50
Single Point: -58 to 392°F (-50 to 200°C) | Averaging: -50 to 275°F (-45.5 to 134.8°C)
[1]: 1 to 5 VDC | [2]: 2 to 10 VDC | [4]: 4 to 20 mA
Please reference pages 5, 6, 7 & 8

o

F (28oC)

o

F (-40 to 85oC)

o

F (275oC) | +/-0.5% of full scale for spans >500oF (275oC)

o

F (55oC) | +/-.04% of full scale for spans <100oF (55oC)

ORDERING

Select one Series (A), one Configuration (B), one Length (C), one Output (D) & one Enclosure (E). NOTE: See Thermowell data sheet for proper
well selection for all Immersion related sensors. Enclosure options (E) include Plastic Box (PB), Galvanized Box (GD), NEMA 3R (BB), NEMA 4X (4X),
& Euro Housing (EH). The Plastic Box (PB) is rated from 0 to 203
choosing a Configuration (B) & Length (C). Choose 1 Output (D). When selecting an Enclosure option (E). Stay in previous row as your B & C
selections. Please specify a temperature span for each transmitter configuration ordered. Three point calibration certifications are standard for all
A/TTM part numbers, however, five point calibration certifications can be ordered separately. See (1) below.

Sensor Series

A/TT100 A/TT1K A/TTM100 (Matched Transmitter) A/TTM1K (Matched Transmitter)

o

F. Once a Sensor Series (A) has been selected, stay within the same row when

Configuration Length Enclosure Output

Calibration Option for A/TTM orders (Additional Accessories)

---- (Default) 3 Point Calibration Certification (Points: 20, 50 & 80% of Span)
NIST TTM CERT-5PT.

(Points: 0, 20, 50, 80 & 100% of Span)

BUILD PART NUMBER

After completing (A), (B), (C), (D) & (E) from the above table, fill in the “Part Number Table” below. (1) is an additional configuration. An
example part number is provided. Please indicate calibration span.

EXAMPLE: A/TT1K - D - 6” - 4 - GD

CALIBRATION SPAN: 30 to 130

CALIBRATION SPAN

24

EXAMPLE: NIST TTM CERT-5PT.

The ACI Mars Plastic Duct housing (PB) has been tested to and complies with the requirements specified in the UL 2043 Standard for Fire Test for heat and visible smoke release for discrete products and
their accessories installed in air-handling spaces. The Plastic Box has a UL94-HB rating. The NEMA 4X enclosure has a UL94-V2 flammability rating. The Euro Housing enclosure has a UL94-V0
flammability rating. CE exception: Averaging units and any other configuration with leads longer than 3 meters. The Plastic Box has a UL94-HB rating. The NEMA 4X enclosure has a UL94-V2 flammability
rating. The Euro Housing enclosure has a UL94-V0 flammability rating.