ACI-Automation Components A/1K-NI-PBS, A/1K-NI-BBS, A/1K-NI-SBS Data Sheet
Automation Components, Inc.
PBS
SBS
BBS
TEMPERATURE | NICKEL RTDS | FLUSH MOUNT BUTTONS
FLUSH MOUNT BUTTONS
Brass, Stainless Steel & Plastic Nickel RTDs
The ACI Nickel Flush Mount Button Series features a stainless steel, brass or white plastic button
sensor with two, 24 inch 22 AWG Etched Teon colored lead wires to dierentiate the dierent
sensor types. The sensors in this series are manufactured using ACI’s proven encapsulation
process to eliminate the eects of moisture on the sensors and to increase the thermal
response time using our high quality, thermally conductive epoxy. This sensor uses a small, low
prole design and should be used in applications where aesthetics is one of your primary
concerns. Each unit is supplied with a mounting kit such that they can be hidden underneath
cabinets or shelving units, in decorative metal plates, trim, drywall or from a ½” piece of conduit
coming down from the ceiling or roof. Note that if painting the sensors, be sure to coat with as
little paint as possible so as to not limit the eect on the accuracy or responsiveness of the sensor. This series can be ordered with an optional NIST
Certicate as designated in the product ordering grid.
Applications: Museums, Historical Buildings, Monitoring Space Temperatures, Oce Buildings, Schools, Retail, Remote Sensor
PRODUCT SPECIFICATIONS
Sensor Type | Sensor Curve:
Number Sensing Points:
Number Wires:
Sensor Output @ 21.1ºC (70ºF) | Lead Wire Colors:
Sensor Accuracy:
Din Standard | Temperature Coecient (0-100ºC):
Sensor Stability:
Response Time (63% Step Change)
Self-Heating | Maximum Operating Current:
Button Sensor Enclosure Material:
Plastic Button Flammability Rating:
Operating | Storage Temperature Range:
Operating Humidity Range:
Lead Length | Conductor Size:
Lead Wire Insulation | Wire Rating:
Conductor Material:
Product Dimensions (Length x Diameter):
Product Weight:
Agency Approvals:
Nickel RTD | PTC (Positive Temperature Coecient)
One
Two (Non-Polarity Sensitive)
1000 Ohms nominal | Red/Red
-40ºC (-40ºF): +/- 1.52ºC (+/- 2.73ºF)
0ºC (32ºF): +/- 0.4ºC (+/- 0.72ºF)
21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF))
54.4ºC (130ºF): +/- 0.56ºC (1.00ºF)
121ºC (250ºF): +/- 1.25ºC (+/- 2.25ºF)
Din 43760 | 6370 ppm/ºC
+/- 0.05% after 1000 Hours @ 150ºC (302ºF)
8 Seconds nominal
0.3ºC/mW (Still Air) | 5 mA
A/1K-NI-BBS: Brass | A/1K-NI-SBS: 304 Stainless Steel | A/1K-NI-PBS: ABS
UL94-HB
A/1K-NI-PBS: -40 to 70ºC (-40 to 158ºF) | -40 to 85ºC (-40 to 185ºF)
A/1K-NI-BBS & A/1K-NI-SBS: -40 to 121ºC (-40 to 250ºF) | -40 to 85ºC (-40 to 185ºF)
10 to 95% RH, non-condensing
24” (61cm) | 22 AWG (0.65mm)
Etched Teon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Silver Plated Copper
A/1K-NI-PBS: 1.00” (25.4mm) x 0.750” (19mm)
A/1K-NI-BBS and A/1K-NI-SBS: 1.20” (30.48mm) x 0.700” (17.78mm)
A/1K-NI-PBS: 0.04 lbs. (18.15g) | A/1K-NI-BBS & A/1K-NI-SBS: 0.10 lbs. (45.36g)
CE, RoHS2, WEEE
Call: 1-888-967-5224 | Web: www.workaci.com
TEMPERATURE | ##
TEMPERATURE | NICKEL RTDS | FLUSH MOUNT BUTTONS
DIMENSIONAL DRAWING
Automation Components, Inc.
Brass & Stainless Button Sensor
Ø.38”(9.53mm)
Ø.70”(17.78mm)
Plastic Button Sensor
Ø.74” (18.67mm)
Front View Right View
STANDARD ORDERING
Model #
A/1K-NI-PBS
A/1K-NI-BBS
A/1K-NI-SBS
Item #
125600
120488
120551
OPTIONAL SENSOR ORDERING
A. Sensor Series
B. Model Series
C. Conguration
No Selection Required
No Selection Required
Select One (1)
Select One (1)
.32”(8.20mm)
Probe Pushes Into
Threaded Insert
1.26” (31.99mm)
.06”(1.40mm)
Wire Length: ~ 23”
3/8” - 16 Thread
1.00” (25.40mm)
Threaded Insert Fits
Inside 3/4” Hole
Description
1K Nickel Plastic Button Sensor, 24” Leads
1K Nickel Brass Button Sensor, 24” Leads
1K Nickel Stainless Steel Button Sensor, 24” Leads
Model # Example:
A/A.1K-NIB.PBS
A/
1K-NI
PBS = Plastic Button | BBS = Brass Button | SBS = Stainless Steel Button
---- = No NIST Certication | NIST = NIST Certicate (Must Specify 1, 3 or 5 Points)D. NIST
Model # Example:
C.
NIST
D.
-OR-
125600A/1K-NI-PBS
MODEL #
A/
1K-NI
TEMPERATURE | ##
Revision C0000002 | Rev 1.0
Call: 1-888-967-5224 | Web: www.workaci.com
Loading...