ACI-Automation Components A/100-2W-BP, A/100-3W-BP, A/1K-2W-BP, A/1K-3W-BP Data Sheet
Automation Components, Inc.
BP-CL2P
BP
TEMPERATURE | PLATINUM RTDS | BULLET PROBE
BULLET PROBE
1” Bullet Probe, Platinum RTD
The ACI Platinum Bullet Probe Series features a one inch stainless steel probe with two or three,
24 inch, 22 AWG Etched Teon colored lead wires to dierentiate the dierent sensor types.
Note that the three-wire “-3W” option should be ordered if using with a 3-Wire temperature
transmitter or sensor conguration on your building management system or PLC
(Programmable Logic Controller). The purpose of the 3rd wire is to compensate for any
external lead wire resistance that will aect the accuracy of your sensors output signal. For best
results, ACI recommends the use of 18 AWG lead wires to reduce the external lead wire
resistance when using a Platinum RTD. The sensors in this series are manufactured using ACI’s
proven double encapsulation process to eliminate the eects of moisture upon the sensors and
to increase the response time using our high quality, thermally conductive epoxy. The bullet
style sensor is designed to be used to monitor air temperatures and should not be fully
submerged in water. This series can be ordered with dierent wire options and NIST Certication as referenced in the Ordering Grid on the back of
the product data sheet. Please contact ACI for more information regarding this sensor or to discuss your application in further detail. Other options
may be available upon request.
Applications: Roof Top Units, Air Handlers, Discharge Air/Supply/Return/Mixed Air Duct Temperature, Remote Temperature Sensing, Hydronic Systems
PRODUCT SPECIFICATIONS
Sensor Type | Sensor Curve:
Number Sensing Points:
Number Wires:
Sensor Output @ 0ºC (32ºF):
Sensor Accuracy @ 0ºC (32ºF):
Din Standard | Temperature Coecient:
Sensor Stability:
Response Time (63% Step Change):
Self-Heating | Maximum Operating Current:
Operating | Storage Temperature Range:
Operating Humidity Range:
Lead Length | Conductor Size:
Lead Wire Insulation | Wire Rating:
Conductor Material:
Probe Material:
Product Dimensions (Length x Diameter):
Product Weight:
Agency Approvals:
Platinum RTD | PTC (Positive Temperature Coecient)
One
A/100-2W-BP Series and A/1K-2W-BP Series: Two (Non-Polarity Sensitive)
A/100-3W-BP Series and A/1K-3W-BP Series: Three (Polarity Sensitive)
A/100-xW-BP Series: 100 Ohms nominal | A/1K-xW-BP Series: 1000 Ohms nominal
+/- 0.06% Class A (Tolerance Formula: +/- ºC = (0.15ºC + (0.002 * |t|))
where |t| is the absolute value of Temperature above or below 0ºC in ºC)
-40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF)
200ºC (392ºF): +/- 0.55ºC (+/- 0.99ºF)
DIN EN 60751 (IEC 751) | 3850 ppm / ºC
+/- 0.03% after 1000 Hours @ 300ºC (572ºF)
8 Seconds nominal
100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA
1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA
-40 to 200ºC (-40 to 392ºF) | -40 to 85ºC (-40 to 185ºF)
10 to 95% RH, non-condensing
24” (61cm) | 22 AWG (0.65mm)
Etched Teon Colored Leads | MIL-W-16878/4 (Type E)
Silver Plated Copper
304 Stainless Steel
1.00” (25.4mm) x 0.250” (6.35mm)
0.04 lbs. (18.15g)
CE, RoHS2, WEEE
Call: 1-888-967-5224 | Web: www.workaci.com
TEMPERATURE | ##
TEMPERATURE | PLATINUM RTDS | BULLET PROBE
DIMENSIONAL DRAWING
Automation Components, Inc.
1.00” (25.40mm)
Ø.25”
(6.35mm)
STANDARD ORDERING
Model #
A/100-2W-BP
A/100-3W-BP
A/1K-2W-BP
A/1K-3W-BP
Item #
119937
119993
120262
120389
Description
100 Ohm RTD, 2 Wire, Bullet Probe, 24” (61.0 cm) Leads, 1” Probe, Brown/Brown Lead Wires
100 Ohm RTD, 3 Wire, Bullet Probe, 24” (61.0 cm) Leads, 1” Probe, Brown/Brown/Black Lead Wires
1K Ohm RTD, 2 Wire, Bullet Probe, 24” (61.0 cm) Leads, 1” Probe, Black/Black Lead Wires
1K Ohm RTD, 3 Wire, Bullet Probe, 24” (61.0 cm) Leads, 1” Probe, Black/Black/White Lead Wires
OPTIONAL SENSOR ORDERING
A. Sensor Series
B. Model Series
D. Conguration
E. Lead Length
Note*: All 20’ Sensors are not CE compliant, but are RoHS2 compliant
Select One (1)
No Selection Required
Select One (1)
Select One (1)
No Selection Required
Select One (1)
Select One (1)
A/
100 = 100 Ohm Platinum RTD | 1K = 1000 Ohm Platinum RTD
2W = Two Wires | 3W = Three WiresC. Number of Wires
BP = 1” Stainless Steel Probe
---- = Standard 24” Teon Leads | 10’ = 10 Feet (3.05m) | 20’ = 20 Feet* (6.10m)
---- = Standard 24” Teon Leads | CL2P = 2 or 3 Conductor Plenum Rated Cable F. Lead Wire Type
---- = No NIST Certicate | NIST = NIST Certicate (Must Specify 1, 3 or 5 Points)G. NIST
23.00” (584.20mm)
Standard View
Model # Example:
.65” (16.51mm)
.31” Stripping Length
(7.87mm)
Model # Example:
100
A/
A.
3WC.BPD.20’E.CL2PF.NIST
B.
G.
-OR-
119937A/100-2W-BP
MODEL #
A/
BP
ACCESSORIES ORDERING
Model #
HARDWARE, ¼” MOUNTING CLIP
HARDWARE, ¼” U-MOUNTING CLIP
TEMPERATURE | ##
Item #
108169
100090
Description
Hardware, ¼” Mounting Clip
Hardware, ¼” U-Mounting Clip Adhesive
Call: 1-888-967-5224 | Web: www.workaci.com
Model # Example:
-OR-
108169HARDWARE, ¼” MOUNTING CLIP
Galvanized Metal•Plastic w/ Adhesive
•
Revision C0000002 | Rev 1.0
Loading...