ACI Veritas Owners manual

Veritas
Shielded Reference with AWS
Owner's Manual
Table of Contents:
Guarantee/Warranty …2 Specifications …5 Design Philosophy …5 Using your Speakers …9 Avoiding Damage …10 Hookup …11 Positioning the Veritas ...11 Break-In …12 Troubleshooting …13 Warranty Registration …14
901 South 4th Street, La Crosse, WI 54601 Phone: (608) 784-4570 Fax: (608) 784-6367
Website: www.audioc.com Email: service@audioc.com
All Rights Reserved 2003
Sound that Satisfies…
2
Audio Concepts, Inc.
Our Guarantee and Warranty
Satisfaction Guaranteed:
We’re sure you’re going to love your new Audio Concepts, Inc. (ACI) products! In the unlikely event that you are not satisfied, please contact us within 30 days of receipt of your ACI products for a
hassle-free return.
Simply follow these procedures:
1. Return Authorization: Call us at (608) 784-4570 or email service@audioc.com, within 30 days of receipt of your ACI
products for a return authorization number. Boldly mark the return authorization number on the outside of the box. Include a brief note stating your name, address and daytime telephone number, along with a short description why the products are being returned.
2. Returning: We request that you return the ACI products to us in their original packaging and include packaging
materials, manuals, etc. Ship by the most economical means (preferably UPS) and insure the products for the invoice purchase price. The customer is responsible for return shipping. Please note: ACI can not accept C.O.D. returns.
3. Credit: Upon receipt and inspection, we will issue a refund for the invoice purchase price and invoiced UPS Ground
service only. Please note this return policy is in effect only if the ACI products are in new condition, in their original packaging, without drilled holes, disassembled or any other modifications.
Speaker Manufacture’s Warranty:
ACI’s 5 Year Standard Warranty and 1 Year Total Assurance Guarantee For 5 years from receipt, Audio Concepts, Inc. will, at its option, repair or replace factory defective
components. This warranty excludes products that have been abused, modified, or disassembled in any way. This warranty does not apply to products, which have been damaged in shipping. Audio Concepts, Inc. liability is limited only to the replacement of defective parts. No other liabilities or obligations are expressed or implied.
For the 1st year of ownership, ACI also provides a unique Total Assurance Guarantee, (TAG). TAG from ACI not only covers everything included in our standard 5 year warranty, but we will also pay for shipping to ACI and back to your front door. TAG is limited to shipping destinations in the
Continental U.S. The ACI 5 Year Standard Warranty and 1 Year Total Assurance Guarantee are fully transferable
from the original owner to a secondary owner provided that the original owner notifies ACI, by phone call or by filling out the on-line form: www.audioc.com/order/warranty_transfer.htm
No warranty will be transferred absent this notification.
Simply follow these procedures:
1. Return Authorization: Call us at (608) 784-4570 or email service@audioc.com for a return authorization number. If
the warranty repair is during the first year of ownership, additional instructions will be given to you at that time. Boldly mark the return authorization number on the outside of the box. Include a brief note with your name, address and a daytime telephone number, along with a short description why the products are being returned.
2. Returning: Carefully repack defective ACI merchandise in their original packaging. Ship by the most economical
means (preferably UPS) and insure the products for their full retail value. The customer is responsible for return shipping (unless the 1st year TAG applies). Please note: ACI can not accept COD or Freight Collect returns.
3. Replacement: Audio Concepts, Inc. will inspect and determine the cause of failure and will pay return shipping on the
defective goods replaced or repaired.
Please ship any returns to the following address:
Audio Concepts, Inc., 901 So. 4th Street, La Crosse, WI 54601 (608) 784-4570
3
IMPORTANT NOTICE
All new speakers require a minimum of 60 hours break-in-time before they sound the way they are supposed to. A speaker's performance improves significantly once broken in. It is critical that you have at least 60 hours on your speakers before you evaluate them. Don't worry if your speakers do not sound perfect the first time you play them. This is normal until they are broken in. If you are having difficulty getting enough hours on your speakers and your 30 day return privilege is getting near, call us. We will work with you. Please give us the courtesy of breaking the speakers in before you determine they don't sound right.
Many of our customers break their speakers in by: A) Leaving them on at moderate listening levels when they are not home.
B) Leaving them on at moderate listening levels while they sleep. C) Running pink noise through them.
These methods are not convenient for everyone and we understand this. But please know that you are not giving yourself, your speakers or us a fair chance if you do not break them in before critical evaluation.
THANK YOU!
Veritas: Quick Setup Guide
Please take the time to read the complete owner's manual. Reading the manual will insure your complete satisfaction. For those of you who must get it running now:
The Veritas will not sound the best until it
has 80-100 hours or more of running time.
The Veritas has a powered woofer
section. A power cord is supplied. A shorter or longer cord may be substituted as long as it is of equal or heavier wire gauge.
The Veritas amplifier draws very little
current at idle. It is best to leave it switched on all the time unless you will be away for an extended period.
The Veritas has a ground lift switch on the
rear panel. Depending on your household and system wiring, one of the two switch positions will yield the lowest noise level.
The Veritas is shipped with the woofer
preamp controls set for flattest anechoic response. The volume control setting is marked with a very small dot on the faceplate. Both lowpass filters should be set at 300Hz, and the phase should be at 0. See diagram.
Most users will never want to change the lowpass or phase settings. Some users will want to adjust the
volume control slightly. For example, placement in a cabinet might result in too much "warmth". In this case, adjust the volume control down slightly. In other systems, you may wish for a bit more "warmth". In this case, adjust the volume control up slightly.
4
The AWS System:
Shipping with your Veritas is a comprehensive manual on using the parametric functions of the AWS system. A CD with test tones will also be included.
Using the parametric EQ essentially involves four steps:
1. Locate the center frequency of the peak. This is most easily accomplished with an SPL meter and test disc or a computer based test system.* This can also be done "by ear" using test tones and very experienced listeners will be able to find the offending frequency listening to music.
2. Use the frequency control to center the control on the peak you want to eliminate or reduce
3. Use the Volume control to cut the level of the peak by the desired amount
4. Use the Q control to adjust the width of the desired cut.
*Parametric equalization works very well for reducing peaks in the frequency response. In general, parametric EQ is not very effective at filling in gaps caused by room acoustics. In other words, be very careful of using any boost. Boost is likely to be ineffective and potentially
damaging to the system. *The least expensive means of instrument based measurement will be using a Radio Shack analog SPL meter
and a CD recorded with test tones. If you use the Radio Shack meter be sure to use a correction chart to account for the basic inaccuracy of the devise.
5
The Veritas
Thank you for your order and congratulations on becoming the owner of an Audio Concepts, Inc. (ACI) speaker system. The Veritas is an audiophile quality system that will provide you with many years of listening pleasure. Be sure and take a moment to register your warranty either by mail or on-line at www.audioc.com.
The Veritas proves that a loudspeaker can be one thing and another, and be superb at both. Perhaps no challenge from home theater was as unexpected as the critical nature of the center channel. The world should have known better: The center channel of a film contains its heart and its voice. The Veritas’ built in discrete woofer amplifier and parametric EQ ensure both precision and power, more than enough to handle the most demanding material you can find. Besides being the world’s new leader in center channel performance, the Veritas was designed to be even more. The Veritas has what it takes to function as a front or rear channel speaker, or even as a main monitor. At ACI, we will never quit trying to achieve more than we have achieved before. Our customers are the happy recipients of our obsession. For a quarter of a century we have sought to bring our customers excellence beyond expectation. Nowhere is this mission more evident than in our Veritas.
Specifications
Frequency response: 80-20kHz ±3db Nominal impedance: 8 ohms Sensitivity: 87db 1 watt/1 meter Bass-loading: Assisted low Q sealed alignment Recommended RMS Power: 20-100 watts Amplifier: (1) 100 Watt RMS with Parametric EQ Tweeter: 1” silk dome, ferro-fluid cooled, shielded Bass-mid: 5 ¼” cast-frame, rubber surround, double magnet, long-throw, shielded Woofers: Dual 6 ½” cast-frame, rubber surround, double magnet, shielded Dimensions: 11 1/2” tall, 29 3/8” wide and 12 ½” deep Weight: 56 lbs Recommended accessories: Center Stand, DH Labs Speaker Cable
Design philosophy for the Veritas
Modern speaker design is a combination of science, art and sweat. A successful design such as the Veritas requires thousands of hours utilizing computer modeling, several generations of prototypes, precision testing, critical listening and many "fine tunings".
Our design goals for the Veritas were to produce a speaker that would set the standard for multi­channel use. The Veritas had to be the ultimate performer not only for the center channel, but for all channels in a multi-channel system. The Veritas had to be an attractively proportioned and constructed speaker with smooth, uncolored, wide-range response, three-dimensional stereo imaging, good sensitivity, high power handling and dynamics, crystal clear dialog and effects, and the ability to convey the "soul" of the musical score. The Veritas also had to use specially developed, fully shielded drive units to allow placement right next to, on top of or under a television set or video monitor. The Veritas had to be extremely linear in the midrange with controlled dispersion to provide optimum speech intelligibility for video dialog, (center channel) applications. We also set a new goal that the Veritas must be user configurable to achieve optimum performance in their particular system and room placement. We are pleased to have achieved and in some
Loading...
+ 9 hidden pages