ACI Brackets, Swivel bracket Owners manual

Double Swivel Bracket

Fully assembled with 5/16" long, 5/16"

Mounting Screws

Mounting Screws

There is a hole provided in each mounting plate where the speaker

Features & Specifications:

* Double Swivels (For Maximum Positioning Flexibility)
* Dual clamping ball-joints allow for an infinite number of bracket positions
* Heavy Duty * Rust Resistant Design * 10 Pound Weight Limit (8 ft lbs torque)
* Includes Safety Cable & Stainless Mounting Hardware

Qty Item Description

2 Bracket Assemblies

2 Safety Cables Stainless steel cable with crimped

(Quantities are for bracket pairs)

diameter, 24 TPI set-screw

Mounting Plates: 3 5/8" x 1 7/8" x 5/16"

loops and attachment ring at each
end

Installation of the bracket:

Locate the proper mounting location for bracket. The stainless
wood screws must be screwed into structure of wall - do not
attach to drywall alone. Use a studfinder or other tool/technique to
find the location of wall studs.

Prior to mounting, ensure that the screw in each foot of the bracket
is tight using supplied hex wrench.

Screw bracket to wall using hardware as shown in diagram. Be
certain to attach safety strap.

4

Wall

4

Speaker

12 Nylon Washers 1.5mm thick nylon washer

8 Stainless Washers
1 5/32" Hex Wrench Wrench (fits all bracket screws)

2" long stainless steel screw for wood

3/4" long, 1/4" diameter, 20 TPI,
stainless steel machine screw

Mount the speaker to the bracket using the proper size screw for
your speaker. (Two screw sizes are provided in the hardware bag.)
Moving the bracket into a convenient position can make this task
easier. Snug the four (4) set-screws to hold in tempororay
postition. Note: set-screws do not need to be loose when
repositioning bracket. Be certain to attach other end of safety
strap.

Position the speaker and tighten the four set-screws by alternately
tightening one screw, then the one opposite to it on the other side
of the cylinder.

Routing the wire:

wire can be passed if applicable. Between the wall and speaker,
the wire can be bent to hide behind the structure of the bracket.

Audio Concepts, Inc. * 901 So. 4th Street * La Crosse, WI 54601 * [phone] * www.audioc.com