ACF Environmental DIRTBAG User Manual

®

SEDIMENT AND PERIMETER CONTROL

DIRTBAG

DEWATERING BAG

FILTERS SILT, SAND, AND FINES OUT OF PUMPED WATER

Dirtbag dewatering bags remove silt, sand, and other debris
from pumped water on construction sites, ponds, dredging
locations and more.

The bag easily connects to a pump discharge hose using
the 4” neck and sewn in attachment straps. To increase the

eectiveness of Dirtbag’s ltration system, ACF Environmental

recommends placing the product on a bed of hay bales or

aggregate to maximize water ow through the surface area

of the bag. Doing so also helps protect the surrounding area
from erosion, sediment displacement and the pollution of
receiving waters. Under most circumstances, a 15x15 Dirtbag
can pass up to 500 gallons of water per minute.

USE GUIDELINES:

- Dirtbag must be monitored at all times during use

(over-lling may cause rupture)

- Flow and removal rates vary based on particle size/

sediment composition

- To increase ow rate place Dirtbag on aggregate, straw

bales, or other porous surfaces

- Dirtbag is full when it can no longer eciently pass water

at a reasonable rate

ADVANTAGES:

- High ow rate

- 15’ x 15’ Dirtbag is rated up to 500 GPM pump

- Built-in neck receives up to 4” discharge hose

9.19

- Removes sediment, trash, and debris

- Economical alternative to other methods

- Custom sizes available upon request

*Full product specications are available on the Dirtbag product page at www.acfenvironmental.com*

For more information about Sediment and Perimeter Control, contact Inside Sales at 800.448.3636
email at [e-mail]