Acesonic DGX-106 User Manual

1 2

POWER

OFF

8 9 0

DOLBY

CD+G

DIGITAL

USB

MIC1 MIC2

VOL1 VOL2 ECHO

DGX-106

MPEG-4

Playback

SD/MMC

MINISDMINISD

DVD MPEG-4KARAOKE PLAYERDVD MPEG-4KARAOKE PLAYER

DGX-106 Multi-Function Karaoke Player

With USB Interface & SD/MMC Reader

USER’S MANUAL

BASS TREBLE

CAUTION:

To assure this player will work at its best, please read this user’s manual carefully before operation and keep for future reference.

P/N

KARAOKEUSB/DISC 5.1CH STEREO VIDEO

STANDBY

1 2 3 4

5 6 7 8

9 0 PROGRAMCLEAR

TITLE

SUBTITLE ENTER A-B

PBC ANGLE ZOOM VIEW

VGA

RETURN

SETUP REPEAT

AUDIO

RESUME

RANDOM

MUTE

DISPLAY

L/R

STEP

SLOW

MUSICMODEMUSICMODE

VOL+

VOL-

DGX-106

www.acesonic.com

Warnings, Cautions and OthersWarnings, Cautions and Others

Mises en garde, precautions et indications diversesMises en garde, precautions et indications diverses

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOTREMOVE COVER (OR BACK).

NOT REMOVE COVER (OR BACK).

NO USERSERVICEABLE PARTS INSIDE.

USER SERVICEABLE PART S INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

SERVICING TO QUALIFIED SERVICE PERSONNEL.

REFER

The lightning flash with arrowhead symbol, within an

The lightning flash with arrowhead symbol, within an equilateral

equilateral triangle is intended to alert the user to the

presence

presence of uninsulated within the

product's

product's enclosure that may be of sufficient magnitude

constitute a risk of electric shock to persons.

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

intended

operating and maintenance (servicing) instructions in

operating

the literature accompanying the appliance.

the

CAUTION

To reduce the risk of electrical shocks, fire, etc:

not remove screws, screws, covers or cabinet.

1.Do not remove screws, screws, covers or cabinet.

1.Do not expose this appliance to rain or moisture.

2.Do

2.Do not expose this appliance to rain or moisture.

FCC INFORMATION (U.S.A.)FCC INFORMATION (U.S.A.)

1.This equipment has been tested and found to

comply with the limits for a Class B digital device,

comply pursuant

pursuant to part 15 of the FCC Rules. These limits

are

are designed to provide reasonable protection

against

against harmful interference in a residential

installation.

This

This equipment generates, uses and can radiate

radio

radio frequency energy and, if not installed and

used

used in accordance with the instructions, may

cause

cause harmful interference to radio

communications.

communications. However, there is no guarantee

that

that interference will not occur in a particular

installation.

installation. If this equipment does cause harmful

interference

interference to radio or television reception, which

can

can be determined by turning the equipment off and

on,

on, the user is encouraged to try to correct the

interference

interference by one or more of the following

measures:

Reorient

Reorient or relocate the receiving antenna.

Increase

Increase the separation between the equipment

and

and receiver.

Connect

Connect the equipment into an outlet on a circuit

different

different from that to which the receiver is

connected.

connected. Consult the dealer or an experienced

radio/TV

radio/TV technician for help.

2. When connecting this product to

IMPORTANT:

accessories and/or another product use only high

accessories quality

quality shielded cables. Cable(s) supplied with this

product

product MUST be used. Follow all installation

instructions.

instructions. Failure to follow instructions could

void

void your FCC authorization to use product in the

U. S. A.

with the limits for a Class B digital device,

to part 15 of the FCC Rules. These limits

designed to provide reasonable protection

harmful interference in a residential

equipment generates, uses and can radiate

frequency energy and, if not installed and

in accordance with the instructions, may

harmful interference to radio

interference will not occur in a particular

be determined by turning the equipment off and

the user is encouraged to try to correct the

or relocate the receiving antenna. the separation between the equipment

receiver.

the equipment into an outlet on a circuit from that to which the receiver is

technician for help.

shielded cables. Cable(s) supplied with this

MUST be used. Follow all installation

your FCC authorization to use product in the

S. A.

triangle is intended to alert the user to the

of uninsulated within the

enclosure that may be of sufficient magnitude

to alert the user to the presence of important

and maintenance (servicing) instructions in

literature accompanying the appliance.

dangerous

dangerous voltage

voltage

However, there is no guarantee

If this equipment does cause harmful

to radio or television reception, which

by one or more of the following

Consult the dealer or an experienced

and/or another product use only high

Failure to follow instructions could

For Canada/Pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT,AND

MATCH FULLY INSERT.

FULLY INSERT.

ATTENTION:

ELECTRIQUES,

ELECTRIQUES, INTRODUIRE LA LAME LA PLUS

LARGE

LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

CORRESPONDANTE

JUSQUAU FOND.

JUSQUAU

For Canada/Pour le Canada

THIS DIGITALAPPARATUS DOES NOT EXCEED

THE CLASS B LIMITS FOR RADIO NOISE

THE EMISSIONS

EMISSIONS FORM DIGITALAPPARATUSAS SET

OUT IN THE

OUT IN THE INTERFERENCE-CAUSING

EQUIPMENT STANDARD

EQUIPMENT STANDARD ENTITLED DIGITAL

APPARATUS,

APPARATUS, ICES-003 OF THE DEPARTMENT OF

COMMUNICATIONS.

COMMUNICATIONS. CET APPAREIL NUMERIQUE

RESPECTE

RESPECTE LES LIMITES DE BRUITS RADIO

ELECTRIQUES APPLICABLES AUX APPAREILS

NUMERIQUES

NUMERIQUES DE CLASSE B PRESCRITES DANS

LA NORMESUR

LA NORMESUR LE MATERIEL BROUILLEUR:

APPAREILS

APPAREILS NUMERIQUES , NMB-003 EDICTEE

PAR

PAR LE MINISTRE DES COMMUNICATIONS.

Caution

Disconnect the electrical plug to shut off power

completely. The POWER on the unit is not off from the

completely. The electrical

electrical plug when the POWER button on the front

panel

panel is not pressed in.

WIDE BLADE OF PLUG TO WIDE SLOT,AND

POUR

POUR EVITER LES CHOCS

EVITER LES CHOCS

INTRODUIRE LA LAME LA PLUS

DE LA FICHE DANS LA BORNE

DE LA PRISE ET POUSSER

FOND.

CLASS B LIMITS FOR RADIO NOISE

FORM DIGITALAPPARATUS AS SET

INTERFERENCE-CAUSING

ENTITLED DIGITAL

ICES-003 OF THE DEPARTMENT OF

CET APPAREIL NUMERIQUE

LES LIMITES DE BRUITS RADIO

DE CLASSE B PRESCRITES DANS

LE MATERIEL BROUILLEUR:

NUMERIQUES , NMB-003 EDICTEE

LE MINISTRE DES COMMUNICATIONS.

POWER on the unit is not off from the

plug when the POWER button on the front

is not pressed in.

IMPORTANT FOR LASER PODUCTSIMPORTANT FOR LASER PODUCTS

CLASS1

CLASS1 LASER PRODUCT

2. Visible laser radiation when open and

2. Visible

DANGER:

interlock

interlock failed or defeated.Avoid direct exposure to

beam.

CATION:

3. Do

3. Do not open the top cover. There are no

CATION:

user

user service able parts inside the unit. Leave all

servicing

servicing to qualified service personnel.

4. CAUTION

REPRODUCTION

4. CAUTION LABEL,

REPRODUCTION OF LABEL:

PLACED

PLACED INSIDE THE UNIT.

LASER PRODUCT

laser radiation when open and

failed or defeated. Avoid direct exposure to

not open the top cover. There are no

service able parts inside the unit. Leave all

to qualified service personnel.

OF LABEL:

LABEL,

INSIDE THE UNIT.

Important Safety instructionsImportant Safety instructions

1. These Instructions.Read1. These

2. These Instructions.Keep2. These Instructions.Keep

3. All Warnings.Heed3. All Warnings.Heed

4. All Instructions.Follow4. All Instructions.Follow

5. not use this product near water.Do5. not use this product near water.Do

6. only with dry cloth.Clean6. only with dry cloth.Clean

7. not block any ventilation openings.Do7. not block any ventilation openings.Do

8. not install near any heat sources such as radiators, heat

produce heat.

that

that produce heat.

9. not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

grounding-type

wider than the other.A grounding type plug has two

one

one wider than the other.A grounding type plug has two

blades

blades and third grounding prong. The wide blade or the

prong are provided for your safety. If the provided plug

third

third prong are provided for your safety. If the provided plug

not fit into your outlet, consult an electrician for

does

does not fit into your outlet, consult an electrician for

replacement

replacement of the obsolete outlet.

10. the power cord from being walked on or pinched

Protect

particularly at plugs, convenience receptacles, and the

particularly point

point where they exit from the apparatus.

11. use attachments and accessories specified by the

Only11. us e attachments and accessories specified by the

Only

manufacturer.

Use

12. only with the cart, stand, tripod,

Use

bracket, or table specified by the

bracket, manufacturer,

manufacturer, or sold with the apparatus.

When

When a cart is used, use caution when

moving

moving the cart.

13. this apparatus during lightning storms or unused

Unplug

long period of time. Apparatus combination to avoid

for long period of time. Apparatus combination to avoid

for injury

injury from tip-cover.

Refer

14. all servicing to qualified service personnel.

Refer

Servicing is required when the apparatus has been

Servicing damaged

damaged in any way, such as power-supply cord or plug is

damaged,

damaged, liquid has been spilled or objects have fallen into

apparatus, the apparatus has been exposed to rain or

the

the apparatus, the apparatus has been exposed to rain or

moisture,

moisture, does not operate normally, or has been dropped.

Instructions.Read

stoves, or other apparatus (including amplifiers)

plug. A polarized plug has two blades with

and third grounding prong. The wide blade or the

of the obsolete outlet.

at plugs, convenience receptacles, and the

where they exit from the apparatus.

or table specified by the

or sold with the apparatus.

a cart is used, use caution when

the cart.

from tip-cover.

is required when the apparatus has been in any way, such as power-supply cord or plug is

liquid has been spilled or objects have fallen into

does not operate normally, or has been dropped.

Overloading

18.

Overloading

not overload wall outlets, extension cords, or integral

Do not overload wall outlets, extension cords, or integral

Do convenience

convenience receptacles as this can result in a risk of fire

electric shock.

or electric shock.

Object

19.

Object and Liquid Entry

Never push objects of any kind into this product through

Never openings

openings as they may touch dangerous voltage points or

short-out

short-out parts that could result in a fire or electric shock.

Never

Never spill liquid of any kind on the product.

20.

Replacement

Replacement Parts

replacement parts are required, be sure the service

When replacement parts are required, be sure the service

When technician

technician has used replacement parts specified by the

manufacturer

manufacturer or have the same characteristics as the

original

original part. Unauthorized substitutions may result in fire,

electric

electric shock, or other hazards.

Safety

21.

Safety Check

completion of any service or repairs to this product,

Upon completion of any service or repairs to this product,

Upon

the service technician to perform safety checks to

ask

ask the service technician to perform safety checks to

determine

determine that the product is in proper operating

condition.

22.

23.

24.

or Ceiling Mounting

Wall

Wall or Ceiling Mounting

product should be mounted to a wall or ceiling only as

The product should be mounted to a wall or ceiling only as

The recommended

recommended by the manufacturer.Any mounting of the

product

product should follow the manufacturer instructions, and

should

should use a mounting accessory recommended by the

manufacturer.

Wet

location marking

Wet location marking

Apparatus shall not be exposed to dripping or splashing

Apparatus

no objects filled with liquids, such as vases, shall be

and

and no objects filled with liquids, such as vases, shall be

placed

placed on the apparatus.

Outdoor Antenna

Outdoor Antenna Grounding

an outside antenna or cable system is connected to the

If an outside antenna or cable system is connected to the

If product,

product, be sure the antenna or cable system is grounded

as to provide some protection against voltage surges

so as to provide some protection against voltage surges

built-up static charges. Article 810 of the National

and

and built-up static charges. Article 810 of the National

Electrical

Electrical Code, ANSI/NFPA 70, provides information with

regard

regard to proper grounding of the mast and supporting

structure,

structure, grounding of the lead-in wire to an antenna

discharge

discharge unit, size of grounding conductors, location of

antenna

antenna discharge unit, connection to grounding

electrodes,

electrodes, and requirements for the grounding electrode.

figure below.

See

See figure below.

receptacles as this can result in a risk of fire

and Liquid Entry

push objects of any kind into this product through

as they may touch dangerous voltage points or parts that could result in a fire or electric shock.

spill liquid of any kind on the product.

Parts

has used replacement parts specified by the

or have the same characteristics as the part. Unauthorized substitutions may result in fire, shock, or other hazards.

Check

that the product is in proper operating

by the manufacturer.Any mounting of the

should follow the manufacturer instructions, and

use a mounting accessory recommended by the

shall not be exposed to dripping or splashing

on the apparatus.

Grounding

be sure the antenna or cable system is grounded

Code, ANSI/NFPA 70, provides information with

to proper grounding of the mast and supporting

grounding of the lead-in wire to an antenna

unit, size of grounding conductors, location of

discharge unit, connection to grounding

and requirements for the grounding electrode.

This

15. product should be operated only from the type of

This

source indicated on the marking label. If you are not

power source indicated on the marking label. If you are not

power

of the type of power supply to your home, consult your

sure

sure of the type of power supply to your home, consult your

product

product dealer or local power company. For products

intended

intended to operate from battery power, or other sources,

refer

refer to the operating instructions.

Protective Attachment

16.

Protective Attachment Plug

The product is equipped with an attachment plug having

The overload

overload protection. This is a safety feature. See

Instruction

Instruction Manual for replacement or resetting of

protective

protective device. If replacement of the plug is required, be

sure

sure the service technician has used a replacement plug

specified

specified by the manufacturer that has the same overload

protection

protection as the original plug.

Power

17.

Power Lines

An outside antenna system should not be located in the

An vicinity

vicinity of overhead power lines or other electric light or

power

power circuits, or where it can fall into such power lines or

circuits.

circuits. When installing an outside antenna system,

extreme

extreme care should be taken to keep from touching such

power

power lines or circuits as contact with them might be fatal.

dealer or local power company. For products

to operate from battery power, or other sources,

to the operating instructions.

Plug

product is equipped with an attachment plug having

protection. This is a safety feature. See

Manual for replacement or resetting of

device. If replacement of the plug is required, be

the service technician has used a replacement plug

by the manufacturer that has the same overload

as the original plug.

Lines

outside antenna system should not be located in the

of overhead power lines or other electric light or

circuits, or where it can fall into such power lines or

When installing an outside antenna system,

care should be taken to keep from touching such

lines or circuits as contact with them might be fatal.

Servicing

25.

Servicing

your product is not operating correctly or exhibits a

If your product is not operating correctly or exhibits a

If marked

marked change in performance and you are unable to

restore

restore normal operation by following the detailed

procedure

procedure in its operating instructions, do not attempt to

service

service it yourself as operating instructions, do not attempt

to service it yourself as opening or removing covers may

expose

expose you to dangerous voltage or other hazards. Refer

all

all servicing to qualified service personal.

change in performance and you are unable to

normal operation by following the detailed

in its operating instructions, do not attempt to

it yourself as operating instructions, do not attempt

service it yourself as opening or removing covers may

you to dangerous voltage or other hazards. Refer

servicing to qualified service personal.

Acesonic DGX-106

Table of Contents

Included Accessories

Please check that you have all of the following accessories supplied to you. If anything is missing, please contact your dealer immediately.

*2 Wired Microphone with 14” Cable *RCAAudio/Video Cable (Yellow/Red/White) *Remote Control *2 AAA Battery *User's Manual *Rack Mount Brackets *Rack Mount Screws

About this manual

The display window information and On Screen Display (OSD) menu items are all in upper case letters.

Precautions

Notes on Power Cord

*When you are away on travel or otherwise for an extended period of time, unplug the unit from the wall outlet. *When unplugging the player from the wall outlet, always pull the plug, not the cord. *Do NOT handle the power cord with wet hands.

Avoid Moisture, Water and Dust

*Do not place the player in a moist environment or in area where there might be an excessive amount of dust build up (e.g. near a fan). *If water or any liquid should get into the unit, turn off the power and unplug the unit from the wall outlet immediately. Consult your dealer or an authorized repair station. Using the unit in this state may lead to fire or electrical shock.

Avoid High Temperatures

*Do not expose the player to direct sunlight or near any heating device.

Notes on Installation

*Select a place where the unit will be level, dry, and not too cold or hot. *Do not use unit on its side or where subject to vibrations (e.g. speakers). *Leave sufficient distance between the TV and unit. * Do not leave heavy objects on top of unit.

Prevent Unit Malfunction

*No parts in this unit are user-serviceable. If the unit no longer functions, unplug it from the wall outlet and contact your dealer for service options. *Never block the vents on the unit. Vents are used to circulate air and keep the temperature of the player down. Blocking the vents may result in damage of the unit.

Before Operation 2

Playable Media 2 Handling and Cleaning of Discs 2 Front Panel Functions 3 Back Panel Functions 3 Remote Functions 4 Player Connections 6

Basic Operation 7

Turning On And Off 7 Initial Setup 7 Basic Playback 8

USB port and operation SD, MMC and mini SD slots 8

The Player

Advanced Operations 9

Playing From a Specific Position 9 Programming & Repeating Tracks 9 Repeating Tracks 9 A-B Repeat 9 How To Adjust Language, Sound,

And Scene Angles 10

Karaoke Operations 11

Audio/Video Playback 11

Additional Information 12

Troubleshooting 12

Warranty Information 14

Warranty Procedure 14

Specification:

1 Year Manufacturer Warranty Lifetime Technical Support Supports 480/720P HDTV Output NTSC/PAL Worldwide Compatible Universal Power Supply: AC100~260V Auto Switch CE/FCC/FDA Certified Player Dimension: 2”x10”x17” Shipping Weight: 8Lbs Designed In U.S.A

1Limited Domestic Warranty 5

Before Operation

Playable Media

This unit supports the following disc formats: *DVD, MPEG-4, Video CD, Video CD 2.0 *CD+Graphics, Audio CD, HDCD, DTS CDs *MP3, WMA, JPEG, Kodak, MPEG

Above media is playable on the following discs: *DVD±R, DVD±RW, DVD±R DL, DVD±RW DL, CD-R/RW

Card reader campatible format*: SD, Mini SD, MMC *Only support FAT32 format

NOTE

*Any disc that is not listed above will cause the player to display “NO DISC” in the DISPLAY WINDOW. Future media and disc formats maybe supported with firmware upgrade, when available.

*Encoding methods of some media formats may affect the playback (e.g. Unable to fast forward or fast backward or load time). Be sure that the encoding process conforms to the standards for that particular format.

*Dirty, scratched, warped, and defective discs may cause a considerable time delay during the loading and reading of the disc. In extreme cases, this may render the disc completely unreadable by the player.

Video Signal Formats

This player also accommodates NTSC and PAL color systems, with automatic detection and override settings.

Digital Audio Formats

This player accommodates, Dolby Digital 5.1 Channels, DTS, and AC-3.

Handling and Cleaning of Discs

Handling

*At anytime, when handling discs, always hold them from their edges and/or by the circle in the center. *NEVER write on the any surface of the disc for it may render the disc unreadable. *Store discs in a clean and dry environment. Storing CD’s vertically will also help prevent warping. *After use, insert CD into jacket or case to minimize wear and tear DO NOT stack CDs on top of one another. *Do not bend or press the disc. Do not expose the disc to direct sunlight or any heat source.

Cleaning

*Wipe the discs from time to time using a soft cloth. Always wipe from the center towards the edges. NOT in circular motions. *DO NOT clean with any other cleaning solution, unless it is specifically made for disc cleaning.

NOTE

CDs revolve at very high speeds inside of players. Never attempt to play cracked or warped CDs; doing so may cause the disc to shatter inside or the player to malfunction.

NOTE

*Depending on the AUDIO SETUP> SPDIF settings digital audio signals may not be output as they are recorded on the disc.

Notes Regarding Discs

*Some DVD's, the player starts playback automatically after inserting the disc, regardless whether or not PLAY BACK CONTROL is on or off. *The image may be poor, noisy, or grainy due to actual defects on the disc itself. *Some functions may not be possible on all discs as described in this manual.

CAUTION

Power-Cord

Handle the power cord only by its plug, do not unplug the power cord by tugging or yanking on the cord. Touching or unplugging the cord while your hands are wet may lead to an electric shock or a short circuit. If the cord becomes damaged or its wires become exposed, please replace the cord as soon as possible in order to prevent an electric fire or shock. Check the power cord every few months to ensure it is functioning properly.

FRONT PANEL FUNCTIONS AND OPERATION:

DGX-106

1. NUMERIC KEYS 0-9:

purposes. When Play Back Control (PBC) mode is on, songs will

purposes. When

stop playing at the end of every track. Playing will not resume until another

stop

track entry has been submitted and set to play.

track

Note:

playing at the end of every track. Playing will not resume until another

entry has been submitted and set to play.

Used to input for track selections or programming

Play Back Control (PBC) mode is on, songs will

2. DVD/USB- Switch between USB mode and Disc Mode.2. DVD/USB- Switch between USB mode and Disc Mode.

3.DISC TRAY - Press to open tray. Press or to close the

tray, it will play the disc automatically.

tray,

it will play the disc automatically.

4. EJECT - Opens and closes disc tray. While open, you may

press PLAY to close disc tray and begin playback or press once more

press

PLAY to close disc tray and begin playback or press once more

to close.

close.

5. PLAY - Begins the playback of media inside the disc tray or to

resume paused playback.

resume

6. PAUSE- Pauses current playback. Press once more or PLAY

to resume playback.

paused playback.

resume playback.

7. STOP - Stops/ends playback.7. STOP - Stops/ends playback.

8. SKIP BACKWARD - Skips to the beginning of the current or

previous track if pressed twice.

track if pressed twice.

9. SKIP FORWARD- Skips to the beginning of the next track.9. SKIP FORWARD- Skips to the beginning of the next track.

10. VOL- - Lowers Volume.10. VOL- - Lowers Volume.

11. VOL+ - Raises Volume.11. VOL+ - Raises Volume.

12. AUDIO - Selects Left/Right, MONO, and Stereo audio output for

Cds and audio track for DVDs.

Cds

and audio track for DVDs.

13. KEY CONTROL DOWN- Transposes the music key. Use to

lower key by a half tone.

lower

key by a half tone.

SD/MMC

MINISDMINISD

14. KEY CONTROL UP- Transposes the music key. Use to raise

key by a half tone.

key

15. MIC TREBLE control - Used to make HIGH FREQUENCY

adjustments to MIC output.

adjustments

16. MIC BASS control - Used to make LOW FREQUENCY

16.

adjustments to MIC output.

adjustments

17. ECHO control - Used to control the amount of ECHO applied to

MICCHANNELS1&2.

MIC

18.MIC1&2VOLcontrol-Used to control the volume output from

18. MIC 1 & 2 VOL control - Used to control the volume output from

MIC CHANNEL 1& 2.

MIC

19.MIC1&2INPUTjacks - Connects microphones with 1/4 inch

19. MIC 1 & 2 INPUT jacks - Connects microphones with 1/4 inch

plug.

2 . DISPLAY WINDOW -

2.DISPLAY WINDOW -

format, and song number. If no disc is in the tray, the display window

format,

will display . Detailed information will also be shown on the

will

TV screen.

21. Remote Sensor - Receives incoming signals from the remote.21. Remote Sensor - Receives incoming signals from the remote.

22. POWER - Turns the power on and off(AC110V / AC240V), When

the power is on, indicatior lights and display on.

the

23. USB INTERFACE- Use this interface to connect USB devices

such as iPOD, Mp3 Players, external hard drives or flash drives.

such

24. CARD READER- Compatible formats: SD, Mini SD, and MMC

USB

by a half tone.

to MIC output.

MIC BASS control - Used to make LOW FREQUENCY

to MIC output.

CHANNELS 1 & 2.

CHANNEL 1& 2.

0 Displays

0 Displays player status such as time, disc

player status such as time, disc

and song number. If no disc is in the tray, the display window

display . Detailed information will also be shown on the

DISC

NO DISC

screen.

power is on, indicatior lights and display on.

as iPOD, Mp3 Players, external hard drives or flash drives.

* Only supports FAT32 format

Only supports FAT32 format

BACK PANEL FUNCTIONS AND OPERATION:

DGX-106

1.ELECTRIC PLUG - Connection to auto-detect AC power supply

1.ELECTRIC PLUG - Connection to auto-detectAC power supply

(100-240V,50-60 Hz).

(100-240V,50-60

2. SCART - Connection mainly used for Tv’s in Europe. TV

display(4:3) built-in video, RGB out and audio.

display(4:3)

3.VGA JACK -

and press button and on the remote control to change

and

press button and on the remote control to change

the default setting and apply change in the SETUP menu before

the

default setting and apply change in the SETUP menu before

using it.

using

it.

4. KARAOKE OUTPUT - Red and white RCA outputs for mixing

vocals and music. Used in karaoke mode.

vocals

and music. Used in karaoke mode.

5. 5.1 CHANNEL AUDIO OUTPUT -

output. To use 5.1 channels, press on the remote or change

output. To

settings in the SETUP menu before using 5.1 channels.

settings

After that, you can test by selecting.

After

6. VIDEO OUTPUT

component/progressive scan inputs.

component/progressive

*Connect “Y” to “Y”, “PB” to “PB” (CB), “PR” to “PR” (CR)

in the SETUP menu before using 5.1 channels.

SETUP> KARAOKE SETUP> KARAOKE MODE>OFF

SETUP>

SETUP> SPEAKER SETUP> DOWNMIX> OFF

SETUP>

that, you can test by selecting.

SETUP> SPEAKER SETUP> TEST TONE> ON

SETUP>

COMPONENT - RCA outputs for use in Tvs with

Hz).

built-in video, RGB out and audio.

Progressive scan output. Connect to a VGA monitor

VGA ENTER

RCA outputs for analog 5.1Dolby

5.1CH

use 5.1 channels, press on the remote or change

5.1CH

See below.

below.

See

KARAOKE SETUP> KARAOKE MODE>OFF SPEAKER SETUP> DOWNMIX> OFF

CENTER> ON

REAR> ON

SUBWOOFER> ON

SPEAKER SETUP> TEST TONE> ON

scan inputs.

KARAOKE OUTPUTKARAOKE OUTPUT

7. RCA VIDEO OUTPUT - Yellow RCA outputs for use in T s with

composite inputs.

composite

8.OPTICAL OUTPUT -

amplifier or receiver for Dobly Digital or DTS sound. Please change

amplifier

settings in the SETUP menu before using it.

settings

work

work while using OPTICAL output.

SETUP> AUDIO SETUP> SPDIF OUTPUT>SPDIF/RAM OR

SETUP> AUDIO

SPDIF/PCM

inputs.

Optical output for connection with a digital

output for connection with a digital

Optical

or receiver for Dobly Digital or DTS sound. Please change

in the SETUP menu before using it.

*Karaoke does not

*Karaoke

while using OPTICAL output.

SETUP> SPDIF OUTPUT>SPDIF/RAM OR

V7. RCA VIDEO OUTPUT - Yellow RCAoutputs for use in T s with

does not

9. S-VIDEO OUTPUT - Output for use in S-VIDEO input.9. S-VIDEO OUTPUT - Output for use in S-VIDEO input.

10.COAXIAL OUTPUT -

digital amplifier or receiver for Dolby Digital or DTS sound. Please

digital

amplifier or receiver for Dolby Digital or DTS sound. Please

change in the SETUP menu before using it.

change

while

while using COAXIAL output.

SPDIF/PCM

1 .MUSIC LEFT & RIGHT CHANNEL OUTPUT -

a TV orAmplifier.

aTV

in the SETUP menu before using it.

using COAXIAL output.

SETUP> AUDIO SETUP> SPDIF OUTPUT> SPDIF/RAM OR

SETUP> AUDIO

1 Please connect with

1 Please

or Amplifier.

Coaxial digital output to connect with a

Coaxial

digital output to connect with a

*Karaoke does not work

*Karaoke

does not work

SETUP> SPDIF OUTPUT> SPDIF/RAM OR

connect with

*Only music and no vocals.

*Only

music and no vocals.

+ 12 hidden pages

Acesonic DGX-106 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual