Acer Veriton 1000 User Manual

Veriton Series

User's Guide

Copyright © 2007. Acer Incorporated.
All Rights Reserved.

Veriton Series User's Guide
Original Issue: 01 / 2007

Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording, or otherwise,
without the prior written permission of Acer Incorporated.

Veriton Series Desktop Computer

Model number: __________________________________

Serial number: ___________________________________

Purchase date: ___________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.

Information for your safety and comfort

Safety instructions

Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.

CAUTION for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to
the power supply unit:

Install the power supply unit before connecting the power cord to the AC
power outlet.

Unplug the power cord before removing the power supply unit from the
computer.

If the system has multiple sources of power, disconnect power from the system
by unplugging all power cords from the power supplies.

iii

CAUTION for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.

Warnings

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.

• To avoid damage of internal components and to prevent battery leakage,

iv

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor
devices, HDD, Optical drive, and even exposure risk from lithium battery
pack.

• Keep the product at least 15 cm away from the wall for sufficient

ventilation.

Safe Listening

Follow these instructions, suggested by hearing experts,to protect your hearing.

• Gradually increase the volume until you can hear it clearly and comfortably

and without distortion.

• After setting the volume level, do not increase it afteryour ears adjust.

• Limit the amount of time listening to music at high volume.

• Avoid turning up the volume to block out noisy surroundings.

• Turn the volume down if you can’t hear people speaking near you.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult
your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.

• This product's power supply is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the power supply plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.

Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grounded may result in electric shock
and/or injury.

Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6
meters (15 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

v

Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may
result in damage and will often require extensive work by a
qualified technician to restore the product to normal condition.

Telephone line safety

• Disconnect all telephone lines from the equipment when not in use and/or

before servicing.

• To avoid the remote risk of electric shock from lightning, do not connect

the telephone line to this equipment during lightning or thunderstorms.

Warning! For safety reasons, do not use non-compliant parts
when adding or changing components. Consult your reseller for
purchase options.

vi

Additional safety information

Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.

Operating environment

Warning! For safety reasons, turn off all wireless or radio
transmitting devices when using your laptop under the following
conditions. These devices may include, but are not limited to:
wireless lan (WLAN), Bluetooth and/or 3G.

Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used normally, and it and its
antenna are positioned at least 1.5 centimeters (5/8 inches) away from your
body (refer to the figure below). It should not contain metal and you should
position the device the above-stated distance from your body. To successfully
transmit data files or messages, this device requires a good quality connection
to the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure that the above separation
distance instructions are followed until the transmission is completed. Parts of
the device are magnetic. Metallic materials may be attracted to the device, and
persons with hearing aids should not hold the device to the ear with the
hearing aid. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF transmissions..

Pacemakers. Pacemaker manufacturers recommend that a minimum separation
of 15.3 centimeters (6 inches) be maintained between wireless devices and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:

• Always keep the device more than 15.3 centimeters (6 inches) from the

pacemaker

• Not carry the device near your pacemaker when the device is switched o. If

you suspect interference, switch off your device, and move it

Hearing aids. Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.

.

vii

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been added. Only
qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed, and the air bag inflates, serious injury could result. Using your device
while flying in aircraft is prohibited. Switch off your device before boarding an
aircraft. The use of wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network, and may be
illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn off
your vehicle engine. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off the device at refueling points
such as near gas pumps at service stations. Observe restrictions on the use of
radio equipment in fuel depots, storage, and distribution areas; chemical plants;
or where blasting operations are in progress. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where the air contains
chemicals or particles such as grain, dust or metal powders.

Emergency calls

Warning: You cannot make emergency calls through this device. To make an
emergency call you shall dial out through your mobile phone or other
telephone call system.

viii

Disposal instructions

Do not throw this electronic device into the trash when discarding.
To minimize pollution and ensure utmost protection of the global environment,
please recycle. For more information on the Waste from Electrical and
Electronics Equipment (WEEE) regulations, visit
http://global.acer.com/about/sustainability.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org
information, check www.lamprecycle.org

. For lamp-specific disposal

.

ENERGY STAR is a government program (public/private partnership) that gives
people the power to protect the environment in a cost effective way and
without sacrificing quality or product features. Products that earn the ENERGY
STAR prevent greenhouse gas emissions by meeting strict energy efficiency
guidelines set by the US Environmental Protection Agency (EPA) and the US
Department of Energy (DOE). In the average home, 75% of all electricity used
to power home electronics is consumed while the products are turned off.
ENERGY STAR qualified home electronic products in the off position use up to
50% less energy than conventional equipment. More information refers to
http://www.energystar.gov

As an ENERGY STAR partner, Acer Inc. has determined that this product meets
the ENERGY STAR guidelines for energy efficiency.

This product has been shipped enabled for power management:

and http://www.energystar.gov/powermangement.

• Activate display’ Sleep mode within 15 minutes of user inactivity.

• Activate computer’s Sleep mode within 30 minutes of user inactivity.

• Wake the computer from Sleep mode by pushing power button.

• More power management settings can be done through Acer ePower

Management.

ix

Tips and information for comfortable use

Computer users may complain of eyestrain and headaches after prolonged use.
Users are also at risk of physical injury after long hours of working in front of a
computer. Long work periods, bad posture, poor work habits, stress,
inadequate working conditions, personal health and other factors greatly
increase the risk of physical injury.

Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis,
tenosynovitis or other musculoskeletal disorders. The following symptoms may
appear in the hands, wrists, arms, shoulders, neck or back:

• numbness, or a burning or tingling sensation

• aching, soreness or tenderness

• pain, swelling or throbbing

• stiffness or tightness

• coldness or weakness

If you have these symptoms, or any other recurring or persistent discomfort
and/or pain related to computer use, consult a physician immediately and
inform your company's health and safety department.

The following section provides tips for more comfortable computer use.

x

Finding your comfort zone

Find your comfort zone by adjusting the viewing angle of the monitor, using a
footrest, or raising your sitting height to achieve maximum comfort. Observe
the following tips:

• refrain from staying too long in one fixed posture

• avoid slouching forward and/or leaning backward

• stand up and walk around regularly to remove the strain on your leg

muscles

• take short rests to relax your neck and shoulders

• avoid tensing your muscles or shrugging your shoulders

• install the external display, keyboard and mouse properly and within

comfortable reach

• if you view your monitor more than your documents, place the display at

the center of your desk to minimize neck strain

Taking care of your vision

Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive
room lighting, poorly focused screens, very small typefaces and low-contrast
displays could stress your eyes. The following sections provide suggestions on
how to reduce eyestrain.

Eyes

• Rest your eyes frequently.

• Give your eyes regular breaks by looking away from the monitor and

focusing on a distant point.

• Blink frequently to keep your eyes from drying out.

Display

• Keep your display clean.

• Keep your head at a higher level than the top edge of the display so your

eyes point downward when looking at the middle of the display.

• Adjust the display brightness and/or contrast to a comfortable level for

enhanced text readability and graphics clarity.

• Eliminate glare and reflections by:

• placing your display in such a way that the side faces the window or

any light source

• minimizing room light by using drapes, shades or blinds

• using a task light

• changing the display's viewing angle

• using a glare-reduction filter

• using a display visor, such as a piece of cardboard extended from the

display's top front edge

• Avoid adjusting your display to an awkward viewing angle.

• Avoid looking at bright light sources, such as open windows, for extended

periods of time.

Developing good work habits

Develop the following work habits to make your computer use more relaxing
and productive:

• Take short breaks regularly and often.

• Perform some stretching exercises.

• Breathe fresh air as often as possible.

• Exercise regularly and maintain a healthy body.

Warning! We do not recommend using the computer on a couch
or bed. If this is unavoidable, work for only short periods, take
breaks regularly, and do some stretching exercises.

Note: For more information, please refer to "Regulations and
safety notices" on page 49 in the AcerSystem User's Guide.

xi

xii

Information for your safety and comfort iii

Safety instructions iii
Additional safety information vi
Operating environment vi
Medical devices vi
Vehicles vii
Potentially explosive environments vii
Emergency calls vii
Disposal instructions viii
Tips and information for comfortable use ix

Empowering Technology 1

Acer Empowering Technology 3

Empowering Technology password 3
Acer eDataSecurity Management 4
Acer eLock Management 5
Acer eSettings Management 7
Acer eRecovery Management 8
Acer ePerformance Management 10

1 System tour 11

Package contents 13
Accessing the User's Guide 14
Front and rear panels 15
Keyboard 16
Optical drive (for selected models) 17

Taking care of your CDs and DVDs 17

Contents

2 Setting up your computer 19

Arranging a comfortable work area 21

Adjusting your chair 21
Positioning your PC 21
Positioning your monitor 23
Positioning your keyboard 23
Positioning your mouse 23

Connecting peripherals 24

Connecting your mouse and keyboard 24
Connecting a monitor 25

Connecting the power cable 26

Taking care of your AC adapter 26

Turning on your computer 27
Turning off your computer 28
Connecting options 29

Connecting to the network 29
Connecting multimedia devices 30

3 System utilities 33

Adobe Reader 35
Norton Internet Security (for selected models) 36
NTI CD&DVD-Maker
(for models with CD or DVD Burner) 37
PowerDVD (for models with DVD) 38

How do I open and watch a DVD? 38

BIOS utility 39
Reinstalling programs 39
Recovering your system 40

4 Frequently asked questions 45

Frequently asked questions 47
Regulations and safety notices 49

FCC notice 49
Modem notices 50
Laser compliance statement 53
LCD pixel statement 53
Macrovision copyright protection notice 53
Radio device regulatory notice 54
General 54
European Union (EU) 54
The FCC RF safety requirement 55
Canada — Low-power license-exempt radio
communication devices (RSS-210) 55
Federal Communications Comission
Declaration of Conformity 57
Declaration of Conformity for CE Marking 58

Index 59

Empowering

Technology

Acer's innovative Empowering Technology
makes it easy for you to access frequently
used functions and manage your new Acer
desktop.

3

Acer Empowering Technology

The Empowering Technology toolbar makes it easy for you to access frequently
used functions and manage your new Acer system. Displayed by default in the
upper half of your screen, it provides access to the following utilities:

• Acer eDataSecurity Management protects data with passwords and

encryption.

• Acer eLock Management limits access to external storage media.

• Acer eSettings Management accesses system information and adjusts

settings easily.

• Acer eRecovery Management backs up and recovers data flexibly, reliably

and completely.

• Acer ePerformance Management improves system performance by

optimizing disk space, memory and registry settings.

For more information, right click on the Empowering Technology toolbar, then
select the "Help" or "Tutorial" function.

Empowering Technology password

Before using Acer eLock Management and Acer eRecovery Management, you
must initialize the Empowering Technology password. Right-click on the
Empowering Technology toolbar and select "Password Setup" to do so. If you
have not initialized the Empowering Technology password and run Acer eLock
Management or Acer eRecovery Management, you will be asked to create it.

Empowering Technology

Note: If you lose the Empowering Technology password, there is
no way to reset it except by reformatting your system. Make sure
to remember or write down your password!

Empowering Technology

4

Empowering Technology

Acer eDataSecurity Management

Acer eDataSecurity Management is an encryption utility that protects your files
from being accessed by unauthorized persons. It is conveniently integrated with
Windows Explorer as a shell extension for quick data encryption/decryption and
also supports on-the-fly file encryption for Lotus Notes and Microsoft Outlook.

The Acer eDataSecurity Management setup wizard will prompt you for a
supervisor password and default encryption password. This password will be
used to encrypt files by default, or you can choose to enter your own password
when encrypting a file.

Note: The password used to encrypt a file is the unique key that
the system needs to decrypt it. If you lose the password, the
supervisor password is the only other key capable of decrypting
the file. If you lose both passwords, there will be no way to
decrypt your encrypted file! Be sure to safeguard all related
passwords!

Acer eLock Management

Acer eLock Management is simple yet effective utility that allows you to lock
removable storage, optical and floppy drive devices, plus other interfaces, to
ensure that data can't be stolen while your system is unattended.

• Removable Storage Devices — includes USB disk drives, USB pen drives, USB
flash drives, USB MP3 drives, USB memory card readers, IEEE 1394 disk
drives, and any other removable storage devices that can be mounted as a
file system when plugged into the system.

• Optical Drive Devices — includes any kind of CD-ROM, DVD-ROM, HD-DVD
or Blu-ray drive devices.

• Floppy Drive Devices — 3.5-inch floppy drives only.

• Network Drives, Printers, Bluetooth, Infrared, Serial Ports, Parallel Ports —
other interfaces that can be locked using Acer eLock Management.

To use Acer eLock Management, the Empowering Technology password must
be set first. Once set, you can apply locks to any of the devices types. Lock(s) will
immediately be set without any reboot necessary, and will remain after
rebooting, until removed.

5

Empowering Technology

Empowering Technology

6

Note: If you lose the Empowering Technology password, there is
no method to reset it except by reformatting your system. Make
sure to remember or write down your password.

Empowering Technology

7

Acer eSettings Management

Acer eSettings Management allows you to inspect hardware specifications,
change BIOS passwords or other Windows settings, and to monitor the system
health status.

Acer eSettings Management also:

• Provides a simple graphical user interface for navigation.

• Prints and saves hardware specifications.

Empowering Technology

Empowering Technology

8

Empowering Technology

Acer eRecovery Management

Acer eRecovery Management is a versatile backup utility. It allows you to create
full or incremental backups, burn the factory default image to optical disc, and
restore from previously created backups or reinstall applications and drivers. By
default, user-created backups are stored to the D:\ drive.

Acer eRecovery Management provides you with:

• Password protection (Empowering Technology password)

• Full and incremental backups to hard disk or optical disc

• Creation of backups:

• Factory default image

• User backup image

• Current system configuration

• Application backup

• Restore and recovery:

• Factory default image

• User backup image

• From previously-created CD/DVD

• Reinstall applications/drivers

9

Empowering Technology

Note: If your computer did not come with a Recovery CD or
System CD, please use Acer eRecovery Management's "System
backup to optical disc" feature to burn a backup image to CD or
DVD. To ensure the best results when recovering your system
using a CD or Acer eRecovery Management, detach all peripherals
(except the external Acer ODD, if your computer has one),
including your Acer ezDock.

Empowering Technology

10

Empowering Technology

Acer ePerformance Management

Acer ePerformance Management is a system optimization tool that boosts the
performance of your Acer computer. It provides an express optimization
method to release unused memory and disk space quickly. The user can also
enable advanced options for full control over the following options:

• Memory optimization — releases unused memory and check usage.

• Disk optimization — removes unneeded items and files.

1 System tour

11

English

This chapter discusses the features and
components of your computer.

13

Package contents

Before you unpack your computer, make sure that you have enough space to
set up your computer.

Carefully unpack the carton and remove the contents. If any of the following
items are missing or damaged, contact your dealer immediately:

Veriton computer or Veriton
computer without optical drive

User's guide (for selected models),
warranty card and installation poster

Items contained in the accessory box

• Keyboard

•Mouse

AC adapter and power cable

English

Other user documentation and third-party software

Accessing the User's Guide

1 System tour14

English

This User's Guide is also available on your computer as an Adobe Acrobat
PDF file.

To access the User's Guide

1. On the Windows taskbar, click on the start button then select All Programs,
AcerSystem.

2. Click on Veriton Series User’s Guide.

15

Front and rear panels

Your computer's front and rear panels consist of the following:

Icon Component Icon Component

Eject button DVI port

Power button CRT/LCD monitor port

Media activity OBR (One Button Recovery)

button

LAN indicator / Network port Line-out jack

USB ports Microphone-in jack

Kensington lock Headphone/Speaker-out/line-

out port

DC-in jack Line-in jack

Note: See "Connecting peripherals" on page 24 and "Connecting
options" on page 29 for more information.

English

Keyboard

1 System tour16

English

The keyboard has full-sized keys that include separate cursor keys, two
Windows keys, four multimedia keys, and 12 function keys.

For information on how to connect your keyboard, see "Connecting your
mouse and keyboard" on page 24.

No. Description No. Description
1 Sleep button 2 Internet/Email/Search keys
3 Multimedia keys 4 Volume control/mute keys
5 e key (Scroll Lock) 6 Num Lock key
7 Cursor keys 8 Application key
9 Windows logo key 10 Caps Lock key
11 Function keys

17

Optical drive (for selected models)

Your computer may come with a DVD/CD-RW combo, DVD-Dual or DVD-Super
multi drive. This drive is located on the front panel of your computer. The DVD
drive allows you to play not only old CD-ROMs, CD-I disks, and video CDs, but
digital video disks (DVDs) as well. The DVD-Dual and DVD-Super multi drive
allow you to record or burn recordable and rewritable disks.

CDs and DVDs, like diskettes, are also compact, lightweight and easy to carry
around. However, they are more delicate than diskettes and must be handled
with extra care.

To eject the optical disk when the computer is turned on, press the drive eject
button.

English

Taking care of your CDs and DVDs

• Keep your disk in its case when not in use to avoid scratches or other
damage. Any kind of dirt or damage can affect the data on the disk, impair
the disk lens reader on the CD or DVD drive, or stop the computer from
successfully reading the disk.

• When handling disks, always hold them by the edges to avoid smudges
or fingerprints.

• When cleaning disks, use a clean, dust-free cloth and wipe in a straight line
from the center to the edge. Do not wipe in a circular motion.

• Clean your CD or DVD drive periodically. You may refer to the Cleaning Kit
for instructions. Cleaning kits can be purchased in any computer or
electronics shop.

English

1 System tour18

2 Setting up your

computer

This chapter contains step-by-step instructions
on how to set up your computer and connect
additional peripherals.

21

Arranging a comfortable work area

Working safely and comfortably begins with the arrangement of your work
space and the proper use of equipment. For this reason, it is very important to
take time and think about how you are going to arrange your work area. Refer
to the diagram on the following page as you set up your system.

Here are some points to consider:

Adjusting your chair

Having the right kind of chair does not necessarily mean you'll be properly
supported. It is necessary to adjust your chair to fit your body. Proper body
posture will make you more comfortable and productive.

• Avoid tilting your chair. If you have a chair that tilts, lock the tilt knobs so
that your chair will not tilt forward or backward while you are using your
computer.

• Adjust your chair height in such a way that you can sit on it with your
thighs parallel to the floor and your feet resting flat on the floor.

• Rest your body on the chair back. Your torso works harder to maintain
balance if you do not rest your body on the chair back.

Positioning your PC

English

English

2 Setting up your computer22

Take note of the following when selecting a location for your computer:

• Do not put your computer near any equipment that might cause
electromagnetic or radio frequency interference, such as radio
transmitters, televisions, copy machines or heating and air-conditioning
equipment.

• Avoid dusty areas and extremes of temperature and humidity.

• You may place your computer beside your desk or under your table, as
long as it does not block the space you need for working and moving.

Warning: Do not cover the top mesh to prevent overheating.

• Your computer comes with a stand that can be easily installed or removed
with a coin. Use the stand if you want to place your computer vertically.

23

Positioning your monitor

Place your monitor at a comfortable viewing distance, usually 50 to 60 cm away.
Adjust the display in such a way that the top of the screen is at or slightly below
eye level.

Positioning your keyboard

The location of the keyboard is a very important factor for your posture.
Placing it too far away will make your body lean forward, forcing you to sit
in an unnatural position. Placing it too high will add tension to your
shoulder muscles.

• The keyboard should be placed just above your lap. Adjust the keyboard
height by flipping the folding stands located under the keyboard.

• Keep your lower arms parallel to the floor as you type. Your upper arms
and shoulders should be relaxed. Then try typing with a light touch. If you
feel any shoulder or neck strain, stop for a while and check your posture.

• Position your keyboard in front of your monitor. Putting your keyboard
beside your monitor will make you turn your head while you type which
could add tension to your neck muscles.

Positioning your mouse

• The mouse should be placed on the same surface as your keyboard so that
you can reach it with ease.

• Adjust its position to allow enough space for movement without making
you stretch or lean over.

• Use your arm to move the mouse. Do not rest your wrist on the table when
moving the mouse.

English

Connecting peripherals

2 Setting up your computer24

English

Setting up your computer is easy. For the most part, you only have four things
to connect: the mouse, the keyboard, the monitor, and the power cable.

Note: The peripherals shown in the connections below are
for your reference only. Actual device models may vary in
select countries.

Connecting your mouse and keyboard

Plug your USB mouse or keyboard cable into any of the USB ports located
on the front and rear panels of your computer.

25

Connecting a monitor

To connect a monitor, simply plug the monitor cable into the monitor port
(blue port) or DVI port located on the rear panel of your computer .

English

Note: Refer to the monitor manual for additional instructions
and information.

English

2 Setting up your computer26

Connecting the power cable

Make sure that the AC adapter is properly plugged into the computer and to
the power outlet.

Caution: Before you proceed, check the voltage range in your
area. Make sure that it matches your computer's voltage setting.

Note: Plug the power cable in tightly to avoid accidental
shutdown.

Taking care of your AC adapter

Here are some ways to take care of your AC adapter:

• Do not connect the adapter to any other device.

• Do not step on the power cable or place heavy objects on top of it.
Carefully route the power cable and any cables away from foot traffic.

• When unplugging the power cable, do not pull on the cord itself but pull
on the plug.

• The total ampere ratings of the equipment plugged in should not exceed
the ampere rating of the cord if you are using an extension cord. Also, the
total current rating of all equipment plugged into a single wall outlet
should not exceed the fuse rating.

27

Turning on your computer

After connecting the necessary peripherals and plugging in the power cable,
you are now ready to turn the computer on and get to work.

To turn on your computer:
1 Turn on all peripherals connected to your computer, such as the monitor,

printer, speakers, etc.

2 On the front panel of your computer, press the Power button.

English

Important: Make sure that the power cable is properly plugged
into an electrical outlet. If you are using a power strip or an AVR
(Auto-Voltage Regulator), make sure that it is plugged in and
turned on.

2 Setting up your computer28

Turning off your computer

English

To turn off your computer, follow the steps below.

For Windows Vista:
1 On the Windows Vista taskbar, click on the Start button, and click ,

then click Shut Down.

2 Turn off all peripherals connected to your computer.

If you cannot shut down your computer normally, press and hold the power
button for at least four seconds. Quickly pressing the button may put the
computer in suspend mode only.

29

Connecting options

Connecting to the network

You can connect your computer to a Local Area Network (LAN) using a network
cable. To do so, simply plug the network cable into the network port on

the rear panel of your computer.

English

Note: Consult your network system administrator or operating
system manual for information on how to configure your
network setup.

English

2 Setting up your computer30

Connecting multimedia devices

You can connect multimedia devices such as microphones, earphones or
headphones, external speakers and audio line-in devices. These devices will let
you take advantage of your computer's multimedia features.

Note: The multimedia devices shown below are for reference only.
Actual device models may vary in selected countries.

Plug the devices in as follows:

• Microphone: Connects to the Microphone-in jacks (pink jacks) located
on the front and rear panels of your computer.

Note: For information on how to configure multimedia devices,
consult the documentation that came with each device.

31

• Earphones, headphones: Connect to the headphone jack located on
the front panel of your computer.

Note: To adjust the headphone volume, use the volume control
buttons on the keyboard. You can also adjust the volume by using
the volume icon on the taskbar at the bottom of your screen.

• External speakers: Connect to the audio-out/line-out jack (lime-green
jack) located on the rear panel of your computer.

English

English

2 Setting up your computer32

• Audio line-in device: Connects to the audio-in/line-in jack (light blue
jack) located on the rear panel of your computer

3 System

utilities

This chapter describes applications that are
preinstalled on your computer.

35

Depending on the hardware and optional features installed in your computer,
your system came bundled with several program utilities designed to streamline
your computer's operations. These utilities may include any of the following:

• Adobe Reader

• Norton Internet Security

• NTI CD-Maker

•PowerDVD

• BIOS utility

• Acer Empowering Technology

All of the applications that came with your computer are very easy to use.
However, if you need more help or information, you may refer to the online
help documentation provided in each software application.

Adobe Reader

Adobe Reader is software that lets you view, navigate, browse and print Adobe
Portable Document Format (PDF) files on all major computer platforms.

To read a PDF document you can:

• Simply double click on any file with an icon like that shown above.

or
1 On the windows taskbar, click on the Start button, highlight Programs,

and select Adobe Reader.
2 Once the program is running, select Open from the File menu.
3 Select the file you wish to view in the Open file browser and click the

Open button.

For more information about Adobe Reader, you may refer to the Adobe Reader
Help menu.

English

3 System utilities36

Norton Internet Security (for

English

selected models)

Norton Internet Security is an anti-virus utility that can protect against viruses,
keeping your data safe and secure.

How do I check for viruses?

1 Double-click the Norton Internet Security icon on the Windows desktop.
2Select Tasks & Scans.
3Select Run Scan to scan your system.

4 When the scan is complete, review the results of the scan.

Note: For optimal security, run a Full System Scan when scanning
your computer for the first time.

You can schedule customized virus scans that run unattended on specific dates
and times or at periodic intervals. If you are using the computer when the
scheduled scan begins, it runs in the background so that you do not have to
stop working.

For more information refer to the Norton Internet Security help files.

37

NTI CD&DVD-Maker (for models with CD or DVD Burner)

The NTI CD&DVD-Maker is optical disk-recording software that allows you to
create and copy audio, data and videos to recordable or rewritable optical disks.

To copy an audio or data disk:
1 Click the Quick Burning icon on the desktop.
2 Insert the CD you would like to copy into the source drive and a blank disk

into the target drive.
3 Choose the source and target drives from the pull-down lists.

English

4 Click the Start button to begin copying.

For more information about NTI CD&DVD-Maker and its other features, refer to
the NTl CD&DVD-Maker Help menu.

3 System utilities38

PowerDVD (for models with DVD)

English

PowerDVD is a high-quality, pure software DVD player that brings high-quality
movies and karaoke to your multimedia PC. You can play back high-resolution
DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio.
PowerDVD provides a complete set of commands for navigation and advanced
features such as multi-angle switching, multi-language and multi-subtitle
selection, and parental control. It also has the i-Power Internet Enabling
feature, which links to online DVD resources via the Power DVD Desktop
Portal Page.

How do I open and watch a DVD?

In most cases, when you insert a DVD into your computer's optical drive,
PowerDVD will automatically open a viewer window and the control panel and
begin playing.

If PowerDVD does not open automatically:
1 Click the Start button in the taskbar.
2 Highlight All Programs.
3 Click the Cyberlink PowerDVD tab.
4 Select PowerDVD.

When PowerDVD opens, simply press the play button to begin playback.

For more information about Cyberlink PowerDVD and its other features,
refer to the PowerDVD Help menu.

39

BIOS utility

The BIOS utility is a hardware configuration program built into your computer's
Basic Input/Output System (BIOS). Since most computers are already properly
configured and optimized, there is no need to run this utility. However, if you
encounter configuration problems and get the "Run Setup" message, you will
need to run this utility.

Note: Before you run BIOS, make sure that you have saved
all open files. The computer reboots immediately after you
exit Setup.

To run the BIOS utility, press the Del key on your keyboard during computer
boot up.

Reinstalling programs

If you uninstall one of the preinstalled programs and want to reinstall it,
do the following:

1 Make sure that the system is turned on.
2 Insert the System CD into the CD or DVD drive.
3 Select the application that you want to reinstall.
4 Follow all onscreen instructions until you finish the installation.

English

Recovering your system

3 System utilities40

English

If your operating system files are lost or damaged, the recovery process
will restore your system's original factory default settings or last system
backup. Your Veriton series computer includes an OBR(One Button
Recovery) button, a feature that makes restoring your system quick
and easy.

OBR works from a hidden partition on your hard drive that contains all
the information required to restore your system.

There are two modes to recovery your system. One is from system’s
original settings and another is from system backup. You can press Alt
+ F10 after the BIOS finishes running the Power On Self Test (POST).

Warning: Initiating the recovery operation while the operating
system is running will result in abnormal shutdown and may make
your current OS unstable or unusable.

After the POST runs, Press Alt + F10 combine key during BIOS to enter
hidden partition. This utility has same password protection with Acer
eRecovery. Follow all onscreen instructions.

41

You can also follow the steps below:
1 Locate the OBR button.
2 Press the button. You can change the password in Acer eRecovery.

a If you have not yet backed-up your system.

English

English

3 System utilities42

b If you have previously backed-up your system.

3 Select “Recover to Default Settings” to restore your system to the

default factory settings. Select “Recover data from last backup” to
restore your system to the last system backup.

43

4 If you chose the recovery option, you should see the following

screen. Click OK to continue.

5 After 15 seconds the system will reboot and initiate the restore

operation.

English

English

3 System utilities44

6 After the recovery operation finishes the system will reboot. You

will be required to go through the setup process again.

Caution! Running the Recovery operation will erase all files
previously saved in your computer so make sure to back up your
important files before starting the recovery process.

Note : This feature occupies 4GB in a hidden partition on your
hard drive.

If you attempt to restore your system using the One Button Recovery feature,
and the system DOES NOT respond, contact your local vendor or authorised
Acer representative immediately.

4 Frequently

asked
questions

This chapter tells you what to do in case your

computer is not working properly. However,

if a more serious problem arises, contact your

dealer or the technical support center

(www.acersupport.com) for assistance.

47

Frequently asked questions

The following questions indicate possible situations that may arise during the
use of your computer and each is followed by easy answers and solutions.

I pressed the power switch but the system did not boot up.

Check the LED located above the power switch.

If the LED is not lit, no power is being applied to the system. Try the following:

• Check if you properly plugged the power cable into an electrical outlet.

• If you are using a power strip or AVR, make sure it is plugged in and

turned on.

If the LED is lit, check the following:

• Is a nonbootable (nonsystem) diskette in the floppy drive? If yes, remove or

replace it with a system diskette and press <Ctrl> + <Alt> + <Del> to restart

your computer.

• The operating system files may be damaged or missing. Insert the startup

disk you created during Windows setup into the floppy drive and press

<Ctrl> + <Alt> + <Del> to restart your computer. This will automatically

diagnose your system and make necessary fixes. However, if the diagnostic

utility still reports a problem, then you may have to perform the recovery

process to restore your system to its original default factory settings.

Note: For more information about recovering your system,
see "Acer eRecovery Management" on page 11.

English

Nothing appears on the screen.

Your computer's power management function automatically blanks the screen
to save power. Just press any key to turn the display back on.

If pressing a key does not work, you can restart your computer. If restarting
your computer does not work, contact your dealer or technical support center
for assistance.

English

4 Frequently asked questions48

The printer does not work.

Do the following:

• Make sure the printer is connected to a power outlet and that it is
turned on.

• Make sure the printer cable is connected securely to the system's parallel or
USB port and the corresponding port on the printer.

• For additional information concerning the printer, refer to the printer's
documentation.

No sound comes out from the computer.

Check the following:

• The volume may be muted. Look for the Volume icon on the taskbar. If it is
crossed-out, click on the icon and deselect the Mute option. You can also
press the volume control/mute knob on your USB keyboard to toggle from
mute to sound on.

• If headphones, earphones or external speakers are connected to the line­out jack of your computer, the internal or built-in speakers are
automatically turned off.

System cannot read diskette, hard disk, CD or DVD information.

Check the following:

• Make sure you are using the correct type of disk.

• Make sure the CD or DVD is inserted into the drive correctly.

• Check if the CD or DVD is clean and unscratched.

• Check your drive by using a good (undamaged) disk. If your drive can not
read the information on the good disk there may be a problem with the
drive. Contact your dealer or technical support center for assistance.

System cannot write data on the hard disk or CD-R/CD-RW.

Check the following:

• Make sure the diskette or hard disk is not write-protected.

• Make sure you are using the correct type of disk or diskette.

49

Regulations and safety notices

FCC notice

This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.

English

English

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.

Caution

Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this computer.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,

50

and (2) this device must accept any interference received, including interference
that may cause undesired operation.

English

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.

Declaration of Conformity for EU countries

Hereby, Acer, declares that this PC series is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. (Please visit
http://global.acer.com/support/certificate.htm for complete documents.)

Compliant with Russian regulatory certification

Modem notices

Notice for USA

This equipment complies with Part 68 of the FCC rules. Located on the modem is
a label that contains, among other information, the FCC Registration Number
and Ringer Equivalence Number (REN) for this equipment. Upon request, you
must provide this information to your telephone company.

If your telephone equipment causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If possible, they
will notify you in advance. But, if advance notice is not practical, you will be
notified as soon as possible. You will also be informed of your right to file a
complaint with the FCC.

51

Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.

If this equipment should fail to operate properly, disconnect the equipment
from the phone line to determine if it is causing the problem. If the problem is
with the equipment, discontinue use and contact your dealer or vendor.

Caution: To reduce the risk of fire, use only No. 26 AWG or larger
UL Listed or CSA Certified Telecommunication Line Cord.

TBR 21

This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for
single terminal connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional assurance of
successful operation on every PSTN termination point. In the event of problems,
you should contact your equipment supplier in the first instance.

List of applicable countries

EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in
the countries of European Union, as well as Norway, Switzerland, Iceland and
Liechtenstein. This device must be used in strict accordance with the regulations
and constraints in the country of use. For further information, please contact
local office in the country of use.

English

English

Notice for Australia

For safety reasons, only connect headsets with a telecommunications
compliance label. This includes customer equipment previously labelled
permitted or certified.

English

52

Notice for New Zealand

1 The grant of a Telepermit for any item of terminal equipment indicates

only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement of
the product by Telecom, nor does it provide any sort of warranty. Above
all, it provides no assurance that any item will work correctly in all respects
with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of
Telecom's network services.

2 This equipment is not capable, under all operating conditions, of correct

operation at the higher speeds for which it is designed. Telecom will accept
no responsibility should difficulties arise in such circumstances.

3 Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this
device. The associated equipment shall be set to operate within the
following limits for compliance with Telecom's Specifications:

a There shall be no more than 10 call attempts to the same number

within any 30 minute period for any single manual call initiation, and

b The equipment shall go on-hook for a period of not less than 30

seconds between the end of one attempt and the beginning of the
next call attempt.

4 Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this
device. In order to operate within the limits for compliance with Telecom's
specifications, the associated equipment shall be set to ensure that
automatic calls to different numbers are spaced such that there is not less
than 5 seconds between the end of one call attempt and the beginning
of another.

5 This equipment shall not be set up to make automatic calls to Telecom's

111 Emergency Service.

6 This device is equipped with pulse dialing while the Telecom standard is

DTMF tone dialing. There is no guarantee that Telecom lines will always
continue to support pulse dialing.

7 Use of pulse dialing, when this equipment is connected to the same line as

other equipment, may give rise to bell tinkle or noise and may also cause a
false answer condition. Should such problems occur, the user should NOT
contact the telecom Fault Service.

8 This equipment may not provide for the effective hand-over of a call to

another device connected to the same line.

9 Under power failure conditions this appliance may not operate. Please

ensure that a separate telephone, not dependent on local power, is
available for emergency use.

53

Laser compliance statement

The CD or DVD drive used with this computer is a laser product.
The CD or DVD drive's classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE
TO BEAM.

APPAREIL A LASER DE CLASSE 1 PRODUIT
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.

LUOKAN 1 LASERLAITE LASER KLASSE 1
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
NICHT DEM STRAHLL AUSSETZEN

PRODUCTO LÁSER DE LA CLASE I
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE
A LOS RAYOS.

ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.

VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA
SÅTEESEENSTIRRA EJ IN I STRÅLEN

VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I
STRÅLEN

ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN

LCD pixel statement

English

English

The LCD unit is produced with high-precision manufacturing techniques.
Nevertheless, some pixels may occasionally misfire or appear as black or
red dots. This has no effect on the recorded image and does not constitute
a malfunction.

Macrovision copyright protection notice

"U.S Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132."
This product incorporates copyright protection technology that is protected by

U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.

54

Radio device regulatory notice

English

Note: Below regulatory information is for models with wireless
LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules). Below information is for products
with such devices.

European Union (EU)

R&TTE Directive 1999/5/EC as attested by conformity with the following
harmonized standard:

• Article 3.1(a) Health and Safety

•

EN60950-1:2001

• EN50371:2002

• Article 3.1(b) EMC

•

EN301 489-1 V1.4.1:2002

• EN301 489-17 V1.2.1:2002

• EN301 489-3 V1.4.1:2002 (Applied to models with 27MHz

wireless mouse/keyboard)

• EN301 489-7 V1.2.1:2002 (Applied to models with 3G

function)

• EN301 489-24 V1.2.1:2002 (Applied to models with 3G

function)

• Article 3.2 Spectrum Usages

•

EN300 328 V1.5.1:2004

• EN301 893 V1.2.3:2003

• EN300 220-1 V1.3.1:2000 (Applied to models with 27MHz

wireless mouse/keyboard)

• EN300 220-3 V1.1.1:2000 (Applied to models with 27MHz

wireless mouse/keyboard)

55

List of applicable countries

EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in
the countries of European Union, as well as Norway, Switzerland, Iceland and
Liechtenstein. This device must be used in strict accordance with the regulations
and constraints in the country of use. For further information, please contact
local office in the country of use.

The FCC RF safety requirement

The radiated output power of the wireless LAN Card and Bluetooth card is far
below the FCC radio frequency exposure limits. Nevertheless, the PC series shall
be used in such a manner that the potential for human contact during normal
operation is minimized as follows:

1 Users are requested to follow the RF safety instructions on wireless option

devices that are included in the user's manual of each RF option device.

English

English

Caution: To comply with FCC RF exposure compliance
requirements, a separation distance of at least 20 cm (8 inches)
must be maintained between the antenna for the integrated
wireless LAN Card and all persons.

Note: The Acer wireless adapter implements a transmission
diversity function. The function does not emit radio frequencies
simultaneously from both antennas. One of the antennas is
selected automatically or manually (by users) to ensure good
quality radiocommunication.

Canada — Low-power license-exempt radio
communication devices (RSS-210)

a Common information

Operation is subject to the following two conditions:

English

56

1. This device may not cause interference, and

2. This device must accept any interference, including interference
that may cause undesired operation of the device.

b Operation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.

c Operation in 5 GHz band

57

Federal Communications Comission

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.

The following local manufacturer/importer is responsible for this declaration:

Product name: PC

Model number: Veriton 1000

Name of responsible party: Acer America Corporation

Address of responsible party: 2641 Orchard Parkway

Contact person: Mr. Young Kim

Tel: [phone]

Fax: [phone]

San Jose, CA 95134
USA

English

English

English

58

Declaration of Conformity for CE Marking

We,
Acer Computer (Shanghai) Limited
3F, No. 168 Xizang medium road, Huangpu District,
Shanghai, China

Contact Person: Mr. Easy Lai
Tel: [phone] Fax: [phone]
E-mail: [e-mail]

Hereby declare that:
Product: Personal Computer
Trade Name: Acer
Model Number: Veriton 1000
Is compliant with the essential requirements and other relevant provisions of

the following EC directives, and that all the necessary steps have been taken
and are in force to assure that production units of the same product will
continue comply with the requirements.

EMC Directive 89/336/EEC as attested by conformity with the following
harmonized standards:

• EN55022:1998 + A1:2000 + A2:2003, AS/NZS CISPR22:2002, Class B

• EN55024:1998 + A1:2001 + A2:2003

• EN61000-3-2:2000, Class D

• EN61000-3-3:1995 + A1:2001

• EN55013:2001 + A1:2003 (applied to models with TV function)

• EN55020:2002 + A1:2003 (applied to models with TV function)

Low Voltage Directive 73/23/EEC as attested by conformity with the following
harmonized standard:

• EN60950-1:2001

• EN60065:2002 (applied to models with TV function)

Council Decision 98/482/EC (CTR21) for pan- European single terminal
connection to the Public Switched Telephone Network (PSTN).

RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous
Substances in Electrical and Electronic Equipment

59

Index

A

accessing the online User’s Guide 14
applications 35

B

BIOS utility 39

C

connecting options

multimedia devices 30

audio line-in device 32
earphones/headphones 31
external speakers 30

microphone 30
network 29
serial mouse 29

D

disk drives

CD-ROM/DVD-ROM/CD-RW drive

inserting CDs/DVDs 17

taking care CDs/DVDs 17

F

Frequently-asked questions 47

blank screen 47
no audio 48
no sound 48
printer not working 48
system cannot read disk 48
system cannot write to disk 48
system did not boot up 47

front panel 15

K

keyboard 16

N

NTI 37

P

PowerDVD 38

R

recovering your system 40

S

safety

CD or DVD 53
modem notices 50

setting up computer 21, 24

area 21
chair 21
connecting peripherals

external monitor 25

power cable 26
keyboard 23
monitor 23
mouse 23

software 35

Norton AntiVirus 36

system utilities

Acrobat Reader 35
Norton AntiVirus 36
NTI CD-Maker 37
PowerDVD 38
reinstalling programs 39

T

turning off computer 28

software shutdown 28
suspend mode 28

turning on computer 27

power button 27

English

English