Acer UM.HP0EE.001 Quick Start Guide
PE270K
PE0
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP (optional) and/or HDMI (optional)
input socket of the monitor, and the DP (optional) and/or HDMI
(optional) output socket of the graphics card on the computer. Then
tighten the thumbscrews on the signal cable connector.
3. USB 3.0 Type C-C Cable (Optional, USB Type-C-C input models
only) Connect one end of the USB 3.0 type C-C cable (optional) to
your computer and connect the other end to your electric devices.
4. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
5. Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
6. Insert the monitor power cable into the power port at the back of the
monitor.
7. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
English
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
FreeSync (HDMI/DP):
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
English
1 2 3 4 5 6
7
Input
External controls
1&2 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/
3 Function key/a. Press to view Main page.Press again to enter next function in the Function
4 Function key
/ /
5 Function key/a. Press to view Main page.Press again to enter Volume adjustment function.
6 Function key/a. Press to view Main page. Press again to enter brightness adjustment
7 Function key
/
power saving mode.
Menu.
b. When the Function Menu is active, press this key selected or move to the
next function.
a. Press to view Main page.Press again to enter Input select function.
b. When the Function Menu is active, press this button selected or move to
the previous function.
b. When the Function Menu is active, this button will enter a selection in the
OSD.
function.
b. When the Function Menu is active. Press to return previous Menu or exit
current Menu..
a. When the Main page is active,Press to trigger the Game mode control
b. When the Function Menu is active, press to exit current Menu.
Note: Acer monitor is purposed for video and visual display of information obtained from
electronic devices.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and
other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS
Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance
with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B
limitsmay be attached tothisequipment.Operationwith non-certied peripheralsislikelytoresult in
interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority,
which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2016” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information ab ut where you can drop off your
wasteequipment for recycling,pleasecontactyour local cityofce,yourhousehold
waste disposal service or the shop where you purchased the product.
Acer monitor is purposed for video and visual display of information obtained from electronic
devices.
English
SPECIFICATION
Driving system TFT Color LCD
Size 27"W (69cm)
Pixel pitch 0.155mm(H) x 0.155mm(V)
LCD Panel
Display Colors 1.07Billion Colors
Dot Clock 600MHz
Max. Resolution 3840x2160@60Hz
Plug & Play VESA DDCCI/DDC2B
EnergyEfciencyClass B
*Annual Energy Consumption 139 (kWh) (for HDMI-input Model)
Power consumption
2
@200cd/m
Brightness 350cd/m2(Typical)
Contrast 100,000,000:1Max. (ACM)
Viewable angle 178° (H) 178° (V) (CR≥10) (Typical)
Response time 4ms (G to G,Typical)
Panel Type In-Plane Switching
Video Digital interface
H-Frequency HDMI/Type-C : 30~160KHz , DP : 160~160KHz
V-Frequency DP/Type-C : 40~60Hz , HDMI : 40~75Hz
ON Mode 36W(typ.)
Sleep Mode 0.5W(typ.)
Off Mode 0.4W(typ.)
Input Connector
Input Video Signal
Speakers 2W x 2
English
Audio
Maximum Screen Size
Power Source 100-240V~, 50/60Hz
Environmental
Considerations
Dimensions 614(W) x 407~522(H) x 207(D)mm
Weight (N. W.) 7.22kg Unit (net)
Mechanism spec
External
Controls:
Switch / Buttons
Functions
HDMI (Only HDMI Model)
DP (Only DP-Input Model)
USB 3.0 Type C (Gen1)(Only Type C model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
DP signal (Only DP Model)
HDMI signal (Only HDMI-Input Model)(Optional)
USB 3.0 Type C (Gen1)(Only Type C model)
Audio-Input (Only Audio-Input Model)
Audio-Output (Only Audio-Output Model)
Horizontal:596.6mm
Vertical:335.7mm
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85%
Tilt: -5° to +20° (Only at the highest point can 20 degrees of recline
be offered for the angle of elevation)
Swivel: -45° to +45°
Height adjustment: 115 mm
Pivot: -90° to +90°
Detachable foot stand: Yes
Power Button
Input switch
Volume
Brightness
Volume
Contrast
Over Drive
Black Boost
Aim Point
Blue Light
Language
ACM
OSD Timeout
Super Sharpness
Transparency
Auto Config (only Analog input
model)
Refresh Rate Num
H. Position(only Analog input
model)
Input
Brightness
Modes
Main Menu OSD
Page Right/Left
V. Position (only Analog input
model)
Auto Source
Focus (only Analog input model)
Wide Mode
Clock (only Analog input model)
Hot Key Assignment
Gamma
DDC/CI
Color Temp
HDMI Black Level
sRGB mode
Quick Start Mode
6-axis Hue
Reset
6-axis Saturate
MPRT
*Allspecicationsaresubjecttochangewithoutnotice.
FindmanualsandotherdocumentsforyourAcerproductontheofcialAcersupportwebsite.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per
year..
Loading...