Acer UM.HE3EE.A01 Quick Start Guide
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near
3. Do not apply pressure to the LCD screen. Excessive
4. Do not remove the cover or attempt to service this unit yourself.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the LCD monitor outside this range may
result in permanent damage.
6. Immediately unplug your monitor and call
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
pressure may cause permanent damage to the display.
An authorized technician should perform servicing of any nature.
an authorized technician if any of the following circumstances occur:
in your location.
Package contents
LCD monitor
Power cord
Audio cable
(Optional)
VGA cable
(Optional)
DVI cable
(Optional)
HDMI cable
(Optional)
Quick start
guide
Adapter
Attaching the monitor to the base
1.
Take out the monitor, stand and base from the package, put them on smooth surface.
2.
Align the stand for the back cover portion of the monitor, insert the back cover, ensure that the monitor and.standconnection is stable,
do not shake.
3.
Align base and stand, insert the base to stand, rotating hand screw until tightening, fix the base.
Connecting
1. Turn off your monitor and unplug your computer’s power cord.
2. 2-1 Connect the video cable
2-2 DVI Cable (Optional, only Dual-Input Model)
2-3 HDMI Cable (Optional, only HDMI-Input Model)
3. Connect the Audio Cable. (Only Audio-Input Model) (Optional)
4. Insert the monitor power cable into the power port at the back of the monitor.
5. Plug the power cords of your computer and your monitor into a nearby
Your Monitor to a Computer
a. Make sure both the monitor and computer are switched off.
b. Connect the VGA video cable to the computer.
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DVI cable to the computer.
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
electrical outlet.
Adapter
H
DMI
AUDIO OUT
AUDIO IN
VGA
DVI-IN
HDMI
External Controls
English
No. Icon Item Description
1, 2
3, 4
5
6
Power button/
indicator
/
Minus / plus
OSD functions Press to view the OSD. Press again to enter a selection in the OSD.
Auto adjust button /
exit
Turns the monitor on/of
Blue indicates power on. Amber indicates standby/power saving mode.
If the OSD is active, press the Minus or Plus
OSD options.
If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive,
press Auto and the monitor
focus, and clock of your display.
f.
button to toggle between the
will automatically optimize the display position,
LCD Monitor Quick Setup Guide
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
English
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of Conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other
relevant provisions of EMC
EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for
energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC
regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certied to comply with the Class B limits may be
attached to this equipment. Operation with non-certied peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modications not expressly approved by the manufacturer could void the user authority, which is
granted by the Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.
Disposal of Waste Equipment by Users in Private Household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed
of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local city
ofce, your household waste disposal service or the shop where you purchased the product.
Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/
In order to prevent damage to the monitor, do not lift the monitor by its base.
LCD Monitor Quick Setup Guide
Loading...