A. Hardware connection:
1. Guide to components
321
English
b Scan for avaliable WLAN APs using your
preferred WLAN manager.
c Select and connect to the access point labeled
AcerProjector, or AcerProjectorXXXX.
1 Mini USB
2 LAN port
3 USB Type A
2. Turn on the projector
3. Check the information on the splash
screen
Projector ID: 7362
Projector Name (SSID) : AcerProjector 001
Server IP : 192.168.100.10
WEP Key : None
Check Projector ID, Projector Name (SSID),
Server IP and WEP on the splash screen. The
Server IP will be assigned by the network
with DHCP enabled. Ask your supervisor for
the wireless connection WEP key when WEP is
enabled.
d Connect the projector to your LAN for a wired
connection.
B. Software installation:
1. The software is stored on the Acer
Projector Gateway.
Please follow the steps below to
download and install:
a Open the internet browser.
b You will automatically be taken to the
welcome page.
4. Connect to network
a Switch on your system, and activate your
wireless LAN.
c Enter the Server IP address into your browser’s
address bar if you do not see the welcome
page.
d Click on Download Acer eProjection
Management on the welcome page.
e Click on Run to download and install the
software.
f Click on Next to launch the Welcome to the
Acer Projector Gateway Setup Wizard.
2. You can also insert the optional Acer
Plug-and-Show (PnS) token
featuring the windows autorun
function into the USB port on your
system.
y
a
e
a
w
t
G
r
c
o
t
e
j
o
r
P
s
s
e
l
e
r
i
W
Note: Acer PnS token is the
optional accessory.
C. Launch the software
Once the installation is complete or
Acer PnS token is inserted into the USB
port on your system, Acer eProjection
Management will open.
English
Note: Make sure your personal
firewall doesn’t block the Acer
eProjection Management
application.
Enter the Projector ID (if needed) and
Username to log in to your Acer
Projector.
Once your’re connected, the PC screen
will be projected.
Note: For more information, please
refer to the online manual. All the
illustrations in this quick guide are
for reference only.