Acer T222DTB, T222A, T212A, T210, S1313WHNE User Manual
...
Acer Projector
S1210/T210/XS-X10/S1212/T212A/
XS-X13E/S1213Hne/T212DTB/XS-
X13HGM/S1312W/T222A/XS-W13E/
S1313WHne/T222DTB/XS-W13HGM
Series User's Guide
Copyright © 2013. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 05/2013
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer Projector
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
TM
"HDMI
registered trademarks of HDMI Licensing LLC."
, the HDMI logo and High-Definition Multimedia Interface are trademarks or
Information for Your Safety and Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
•
Unplug the power cord before removing the power supply unit from the
projector.
•
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
iii
Warnings!
•
Do not use this product near water.
•
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
iv
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
•
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices or lamp.
Using electrical power
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
•
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
•
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
•
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (14.76 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
the power cord or plug is damaged, cut or frayed
•
liquid was spilled into the product
•
the product was exposed to rain or water
•
the product has been dropped or the case has been damaged
•
the product exhibits a distinct change in performance, indicating a need
for service
•
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
v
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
Do not look into the projector's lens when the lamp is on. The bright light
may hurt your eyes.
•
Turn on the projector first and then signal sources.
•
Do not place the product in the following environments:
• Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector are necessary.
• Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
• Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shorten the life span and darken the image.
• Locations near fire alarms.
• Locations with an ambient temperature above 40 ºC/104 ºF.
• Locations where the altitudes are higher than 10000 feet.
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
vi
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
•
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
•
Do not face the projector lens to the sun. It can lead to fire.
•
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
•
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to stop
before turning main power off.
•
Do not touch the air outlet grille and bottom plate which become hot.
•
Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots are clogged with dirt or dust.
•
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
•
Always open the lens shutter or remove the lens cap when the projector is
on.
•
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
•
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
•
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
•
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
•
The product will detect the life of the lamp itself. Please be sure to change
the lamp when warning messages display.
•
When changing the lamp, please allow the projector to cool down, and
follow all changing instructions.
•
Reset the "Lamp Hour Reset" function from the Onscreen Display
"Management" menu after replacing the lamp module.
•
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
•
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
•
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
vii
"Lamp(s) contain Mercury,
Dispose Properly."
Caution for Listening
To protect your hearing, follow these instructions.
•
Increase the volume gradually until you can hear clearly and comfortably.
•
Do not increase the volume level after your ears have adjusted.
•
Do not listen to music at high volumes for extended periods.
•
Do not increase the volume to block out noisy surroundings.
•
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
viii
First Thing First
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the projector provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
In extremely hot, cold or humid environments.
•
In areas susceptible to excessive dust and dirt.
•
Near any appliance that generates a strong magnetic field.
•
Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
•
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
Please do not open or disassemble the product as this may cause electric shock.
•
When changing the lamp, please allow the projector to cool down, and follow all
changing instructions.
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
•
Reset the "Lamp Hour Reset" function from the Onscreen Display "Management"
menu after replacing the lamp module.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
Turn on the projector first and then the signal sources.
•
Do not use lens cap when projector is in operation.
•
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Information for Your Safety and Comfort iii
First Thing First viii
Usage Notes viii
Precautions viii
Introduction 1
Product Features 1
Package Overview 2
Projector Overview 3
Projector Outlook 3
Control Panel 4
Remote Control Layout 5
MHL Feature Introduction 7
Getting Started 8
Connecting the Projector 8
Turning the Projector On/Off 9
Turning On the Projector 9
Turning Off the Projector 10
Adjusting the Projected Image 11
Adjusting the Height of the Projected Image 11
How to Optimize Image Size and Distance 12
How to Get a Preferred Image Size by Adjusting
Distance and Zoom 14
User Controls 16
Installation Menu 16
Acer Empowering Technology 17
Onscreen Display (OSD) Menus 18
Color 19
Image 21
Setting 23
Management 28
Audio 29
3D 29
Language 30
Contents
Appendices 31
Troubleshooting 31
LED & Alarm Definition Listing 35
Replacing the Lamp 36
Ceiling Mount Installation 37
Specifications 40
Compatibility Modes 42
Regulations and safety notices 46
English
Introduction
Product Features
This product is a single-chip DLP® projector, including the following
outstanding features:
•
DLP® technology
S1210/T210/XS-X10/S1212/T212A/XS-X13E/S1213Hne/T212DTB/XS-X13HGM:
Native 1024 x 768 XGA resolution, Auto/4:3/16:9 aspect ratio supported
S1312W/T222A/XS-W13E/S1313WHne/T222DTB/XS-W13HGM: Native 1280 x
800 WXGA resolution,Auto/Full/4:3/16:9 aspect ratio supported
•
Enables projecting 3D content via DLP Link Technology
•
Acer ColorBoost technology delivers vivid, life-like images
•
High brightness and contrast ratio
•
Versatile display modes enable optimum performance in any situation
•
NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported
•
Acer EcoProjection Technology delivers Intelligent power management
approach and physical efficiency improvement
•
Empowering Key reveals Acer Empowering Technology functions for easy
adjustment of settings
•
Advanced keystone correction delivers optimum presentations
•
Multi-language Onscreen Display (OSD) menus
•
Manual focus projection lens
•
2X digital zoom and pan move function
•
Microsoft® Windows® 2000, XP, 7, Vista®, Macintosh OS compliant
•
LAN settings enable remote management of projectors via a web browser
•
Crestron compliant
1
2
English
Package Overview
This projector comes with all the items shown below. Check to make sure you
have them all. Contact your dealer immediately if any thing is missing.
Projector Power cord VGA cable
BACK
ENTER
PgUp
PgDn
SD/USB AHDMI/DV I LAN/WiFi USBB
Security card User’s guide (CD-ROM) Remote control
Quick start guide Battery x 2 Dust filter
SmartPen & PB dongle
(Optional and only for
S1213Hne/T212DTB/XS-
X13HGM/S1313WHne/
T222DTB/XS-W13HGM)
(Optional)
English
Projector Overview
AUDIO-R
AUDIO-L
AUDIO
IN 1
AUDIO
IN 2
AUDIO
OUT
VGA IN 1
VGA IN 2
VGA OUT
USB B
LAN
RS232
S-VIDEO
VIDEO
AUDIO-R
AUDIO-L
AUDIO
IN
AUDIO
OUT
VGA IN VGA OUT
USB BRS232
S-VIDEO
VIDEO
23 54 6789101
3 6789101
1211
13
(S1213Hne/T212DTB/XS-X13HGM/
S1313WHne/T222DTB/XS-W13HGM)
(S1210/T210/XS-X10/S1212/
T212A/XS-X13E/S1312W/T222A/
XS-W13E)
Projector Outlook
3
Front/upper side
1
2
3
4
# Description # Description
1 Control panel 5 Power key and Power indicator
2 Projection lens
LED
3 Elevator button 6 Focus ring
4 Lens cap 7 Remote control receiver
5
6
7
Rear side
# Description # Description
1 RS232 connector 8 S-Video input connector
2 LAN (RJ45 port for 10/100M
Ethernet) 9 Audio input connector (L/R)
3 Mini USB connector 10 Audio input connector
4 Remote control receiver
5 HDMI (MHL) connector 11 Power socket
6 Monitor loop-through output
connector
7 Analog RGB signal/HDTV/
component video input connector
Composite video input connector
Audio output connector
12 Tilt adjusting wheel
13 Kensington™ lock port
4
English
Control Panel
1
2
3
2
4
5
# Function Description
1 LAMP Lamp Indicator LED
2 Power key and Power
indicator LED
3 Keystone Adjusts image distortion caused by tilting
4MENU
5 HIDE Hides the screen picture.
6 TEMP Temp Indicator LED
7 SOURCE Chooses RGB, component video, S-Video,
8 Four directional select keys Selects items or makes adjustments to your
9 Empowering key Enables unique Acer functions: eView,
10 RESYNC Automatically synchronizes the projector
Refer to the "Turning the Projector On/
Off" section.
projection (±40 degrees).
•
Launches the Onscreen Display (OSD)
menu, returns to the previous step for
the OSD menu operation or exits the
OSD menu.
•
Confirms your selection of items.
composite video or HDTV source.
selection.
eTimer, ePower Management, e3D.
to the input source.
6
7
8
9
10
3
English
PgDn
PgUp
SD/USB A HDMI/DVI LAN/WiFi USBB
ENTER
BACK
Remote Control Layout
# Function Description
1 POWER Refer to the "Turning the Projector On/Off" section.
2 ASPECT RATIO To choose the desired aspect ratio.
3 ZOOM Zooms the projector display in or out.
4 RESYNC Automatically synchronizes the projector to the input
source.
5 Keystone Adjusts image distortion caused by tilting projection
Four
directional
select keys
6 Keypad 0~9 Press "0~9" to input a password in the "Setting" >
7 VGA To change source to VGA. This connection supports
8 COMPONENT (No function)
9 S-VIDEO To change source to S-Video.
10 HDMI™;
HDMI™/DVI
11 Infrared
transmitter
12 Empowering key Enables unique Acer functions: eView, eTimer,
13 FREEZE To pause the screen image.
(±40 degrees).
Selects items or makes adjustments to your selection.
"Security" OSD.
analog RGB, YPbPr (480p/576p/720p/1080i/1080p),
and YCbCr (480i/576i).
To change source to HDMI™ (or DVI) (for the model
with HDMI™ or DVI connector).
Sends signals to the projector.
ePower Management, e3D.
5
6
English
# Function Description
14 HIDE Press "HIDE" to hide screen image; press again to
15 SOURCE Chooses RGB, component video, S-Video, composite
16 MENU
17 PgUp/PgDn For computer mode only. Use this button to select the
18 VIDEO To change source to Composite video.
19 MUTE To turn on/off the volume.
20 WIRELESS;
LAN/WiFi
21
22 SD/USB A (No function)
23 USB B (No function)
Rewind
Play/Pause
Stop
Fast-forward
display the image.
video or HDTV source.
•
Launches the Onscreen Display (OSD) menu,
returns to the previous step for the OSD menu
operation or exits the OSD menu.
•
Confirms your selection of items.
next or previous page. This function is only available
when connected to a computer via a USB cable.
(No function)
(No function)
English
MHL Feature Introduction
When your smartphone is connected to the projector, you can use some buttons
on the remote control to control your smartphone. Press "Empowering key" for
one second to enter or leave the MHL control mode. After entering the MHL
control mode, press "RESYNC" to switch between the navigation mode
(default), media mode and numeric mode.
Description
# Function
15 Empowering key Long press for one second to enter or leave the
4 RESYNC After entering the MHL control mode, press to
5Four
6 Keypad 0~9 (No function) (No function) Enters 0~9.
16 MENU Goes to the
21
directional
select keys
Rewind
Play/Pause
Stop
Fast-forward
Up Up (No function) (No function)
down down (No function) (No function)
Left Left Decreases the
Right Right Increases the
Navigation
mode
MHL control mode.
switch between the navigation mode (default),
media mode and numeric mode.
root menu.
(No function)
Selects or
enters items.
Exits current
page.
(No function) (No function)
Media mode Numeric mode
volume.
volume.
(No function) (No function)
Rewinds/Plays/
Pauses/Stops/
Fast-forwards
the playing
media files.
(No function)
(No function)
Enters 1.
Enters 2.
Enters 3.
7
8
English
AUDIO-R
AUDIO-L
AUDIO
IN 1
AUDIO
IN 2
AUDIO
OUT
VGA IN 1
VGA IN 2
VGA OUT
USB B
LAN
RS232
S-VIDEO
VIDEO
AUDIO-R
AUDIO-L
AUDIO
IN
AUDIO
OUT
VGA IN VGA OUT
USB BRS232
S-VIDEO
VIDEO
USB
USB
RS232
RBG
RBG
HDTV adapter
RS232
D-Sub
7
D-Sub
D-Sub
2
5
5
6
5
2
1
R
W
R
L
L
R
9
3
Y
10
10
11
8
D-Sub
4
Y
5
Y
DVD player, Set-top
box, HDTV receiver
VGA
RS232
Video/S-
Video
Output
Display
Speakers
Getting Started
Connecting the Projector
# Description # Description
1 Power cord 6 S-Video cable
2 VGA cable 7 RS232 cable
3 VGA to component video/HDTV
adapter
4 Composite video cable 10 RJ45 cable
5 Audio cable 11 HDMI (MHL) cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
8USB cable
9 3 RCA component cable
Loading...