Page 1
Acer Acer –LCD-G195W
Service Manual
LCD Monitor Acer G195W
- 0 -
Page 2
1
Table of Contents
Important Safety Notice .........................................................................................02
01 Product Specification ..........................................................................................03
02 Flat Panel Specification .......................................................................................15
03 Exploded Diagram ..............................................................................................36
04 Troubleshooting....................................................................................................37
05 Spare Parts List ...................................................................................................42
06 Schematics and Layouts.......................................................................................43
07 Assembly and Disassembly ................................................................................46
Appendix : User’s manual
Copyright
Copyright 2006 InnoLux Tech. Corp. Ltd
All Rights Reserved
This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any
electronic or machine readable form without prior written permission of InnoLux Tech. Corp. Ltd.
Acer G195W Service Manual
1
Page 3
Acer Acer –LCD-G195W
Important Safety Notice
1. Safety precautions
This monitor is manufactured and tested on a ground principle that a user’s safety comes first.
However, improper used or installation may cause damage to the monitor as well as to the user.
Warning:
z This monitor should be operated only at the correct power sources indicated on the label on the
rear of the monitor. If you’re unsure of the power supply in you residence, consult your local dealer
or Power Company.
z Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor
should only be repaired by a qualified technician.
z Do not remove the monitor cabinet. There are high-voltage parts inside that may cause electric
shock to human bodies.
z Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
z Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable
immediately and consult your closed dealer.
z Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the class screen.
z Do not place heavy objects on the monitor or power cord.
2. Product safety notice
Many electrical and mechanical parts in this chassis have special safety visual inspections and the
protection afforded by them cannot necessarily be obtained by using replacement components rated
for higher voltage, wattage, etc. Before replacing any of these components read the parts list in this
manual carefully. The use of substitute replacement parts, which do not have the same safety
characteristics as specified in the parts list, may create shock, fire, or other hazards.
3. Service notes
z When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
z Keep wires away from high voltage, high temperature components and sharp edges.
z Keep wires in their original position so as to reduce interference.
z Adjustment of this product please refers to the user’ manual.
2
Page 4
Acer Acer –LCD-G195W
01 Product Specification
1. General:
G195W series LCD monitor is designed with a wide screen 19” WXGA+ TFT LCD panel, LVDS interface, analog RGB
signal input and DVI-D signal input .It featured with embedded universal AC power supply. This monitor can support
maximum resolution up to 1440x900@60Hz. It support HDCP and color management function.
1.1 Main Features
Maximum resolution : 1440x900 @ 60Hz
Back light system : 4 CCFL (top & bottom edge side)
Pixel pitch : 0.2835 (H) x 0. 2835 (V)
Display area : 408.24 (H)255.15(V) 19 inch diagonal
Brightness : ≥250cd/m²
Contrast ratio :1000
ACM (option) :50000:1
Response time (Tr+Tf) : 5ms (typ.) (2)
Viewing angle : 160°(H)/ 160°(V), typ (3)
Input interface : Analog (D-sub 15 pin)
Digital Option(DVI-D 24 pin)
Power management : Compatible with VESA DPMS
Plug & Play : VESA DDCCI
OSD language
Non EU version : English, French, German, Italian, Spanish, Chinese S. Chinese T. Japanese
EMEA version : English, French, German, Italian, Spanish, Dutch, Finnish, Russian
Russian version : Russian
Universal AC power supply
Note (1)(2)(3): This item spec depend on the LCD panel.
׃1 (typ.) (1)
1.2 Accessories
Items
Description
AC Power Cord : 1.8 m. (Black. Cord type depend on sale region)
VGA cable : 1.8 m. (15 pin D-SUB, black cable with blue male connector)
Quick-start Guide : User manual English (640Mb CD)
Audio cable : 1.8m. (Green/Blue header)
DVI cable : 1.8 m. (18+1 pin, black cable with white connector)
Audio Cable(option) : 1.8 m (Audio Line Cable Green/Blue header)
Power cable
(option)
1.8m 1.8m 1.8m 1.8m Multi Multi
● ● ● ● ● ●
2. Operation Specifications
The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality during
exposure to the operating conditions and after exposure to the non-operating conditions, in any sequence.
2.1 Environmental conditions
VGA
cable
DVI
Cable
(option)
Audio
cable
(option
Warranty
card
Quick-start
Guide
Operating Specification
Low Temperature
High Temperature +40°C / 20% R.H., 12 hrs.
High Humidity +32°C/ 80% R.H., 12 hrs
0°C (Relative Humidity is as low as possible), 12 hrs.
3
Page 5
Acer Acer –LCD-G195W
Altitude 12,000 feet at 25°C (hold 3.5 hrs)
Storage
Low Temperature
High temperature &low humidity +65°C/ 10% R.H.
-30°C / humidity not controlled
Test Profile
Max. Wet Bulb Temp 39°C
Altitude 40,000 feet at -30 °C (hold 1 hr)
+25°C/ 50%R.H.(2hrs)-> -30°C/ No R.H.(12hrs).-> +41°C/ 90%
R.H.(12hrs)->+65°C/ 10% R.H.(12 Hrs)->+25°C/ 50% R.H.(2hr)
Figure 1 Absolute Ratings of Environment
2.2 Safety, EMC, Ergonomics and Compatibility Requirements
EMC
Safety
EMC&Safety
Ergonomics
4
Page 6
Acer Acer –LCD-G195W
2.3 Electrostatic Discharge Requirements
The subject unit must withstand ±8KV for contact discharge and ±15KV for air discharge of Electrostatic Discharge
and meet the standard of IEC61000-4-2(EN55024). (without discharge on VGA/DVI/HDMI pin)
Item Condition Spec Remark
Contact discharge : +/-4KV
Electrostatic
Discharge
Acer SPEC
Contact discharge : +/-8KV
Air discharge : +/-8KV
Air discharge : +/-15KV
2.4 Reliability
Items Condition Spec Note
MTBF
CCFL Life time Luminance becomes 50%
Note1. Display an all WHITE field at mid Brightness and Contrast settings.
Operating condition is 25°C
≧ 60,000 Hours
≧ 50,000 Hours(min)
3. Electrical and Optical Characteristics and Performance
3.1 Main Power Supply
3.1.1
Input characteristics
Items Condition Spec Note
150pF/330ohm.
●
●
Each point 10
times.
1 time/Sec.
Excluding the
LCD, CCFL
Note1
AC Input Voltage range Universal input full range 90~264Vac
AC Input Voltage rating Universal input full range 100~240Vac
AC input frequency range 90~264Vac 47~63Hz
AC input frequency rating 100~240Vac 50~60Hz
100Vac 1.5A(max) AC Input Current
240Vac 0.8A(max)
Inrush Current
AC-DC power Efficiency
Note2. Before each test, the buck capacitor needs to be discharged.
Before each test, it must be 10 minutes at least after the latest test.
Hot star not component be damaged.
115Vac,cold star,25°C 35A (max)
230Vac,cold star,25°C 70A(max)
DC output full loading ≥80%
3.1.2 Output characteristics
Items Condition Spec Note
Ripple and Noise
+24V output <1000mv
+5V output <200mv
See Note2
See note 2
audio 5V output <300mv
24v loading:0.2A~1.2A
5v loading:0. 7A~1.3A
audio 5v loading:0A~1.0A
Vcc24V:23V~28V
Vcc5V:4.85V~5.35V
audio 5v:4.5V~5.5V
5
For system active
Page 7
Acer Acer –LCD-G195W
A
5v loading:0.04A~1.3
24V loading: 0A
DC Output Voltage
DC output loading
capability
Hold-up time AC input: 100V~240V >10mS
Overshoot <10%
Turn on delay time <2S
Power management See Table-1
Note3: Paralleled a 0.1uF ceramic Cap. And 47uF aluminum Cap. Between the end of DC loading side, Measured
band-width=20MHz. Ripple voltage of +25V is less than 1500mV when enter into burst mode.
3.1.3
Protection characteristics
audio 5v loading:0A
Vcc5V/1.3A
<50mS
Vcc24V:23V~30V
Vcc5V: 4.85V~5.35V
audio 5v:4.5V~5.5V
Vcc24V/1.2A
audio 5V/1.0A
Protection Condition Spec
OPP nominal AC input 45W ( min )
SCP(short circuit protection) Before fuse with auto-recovery function
For power saving or DC off
OVP(Over voltage protection) Auto recovery <output capacitor voltage
Table-1
Status H-sync V-sync Video Power LED
Power On on on active ≤ 40W Blue
Power Saving
Power Off -- -- -- < 1W Off
3.1.4 Backlight Power Supply
Items Specification
Panel MT19AW02
Lamp 4 CCFL
Input Voltage DC 23~28 V
Input current 1.0A (Typ.), 1.2A (Max.)
off on blanked < 1W Yellow
on off blanked < 1W Yellow
off off blanked < 1W Yellow
On/Off switch level
Brightness PWM Duty
(ACM Off)
Brightness PWM Duty
(ACM On)
CCFL operating
Voltage
CCFL Current
5.5V≧Von≧ 2.0 V (on)
-0.3v ≤ Voff ≤ 0.8 V (off)
20%~100%
10%~100%
730Vrms (Typ.),
2.0 mA (min.)
6
Page 8
Acer Acer –LCD-G195W
7.0mA (Typ.)
7.5mA (Max.)
CCFL startup voltage
Operating frequency 40~60KHz
Protect delay time > 1 second
Efficiency ≥70% (Using dummy load)
Note: Other panels please refer to the reference panel specs.
≧1700 Vrms (0˚C)
3.2 Brightness output
The test to verify specifications in this section shall be performed under the following standard conditions unless otherwise
noted.
Temperature : 25 ± 5°C
Test pattern : white
Video Resolution : 1366 x 768
Video input level : 700 mV ± 2%
Warm-up time : 30 minutes
LCD Module BL
INL: MT185GW01 V.0
Set brightness control and also contrast control at maximum, to measure the screen center, the light output shall ≥ BL cd/m
(as panel spec).If phase in other second panel, pls refer to the panel spec.
≥250 cd/m2
2
3.3 White balance
The test standard conditions refer to Sec 3.3.(Brightness control is at 100 contrast control is at 50 )
Chromaticity Coordinate
x y
Cool
Warm
User
Mode
9300K 0.283 ± 0.030 0.297 ± 0.030
6500K 0.313 ± 0.030 0.329 ± 0.030
Panel While x Panel While y
3.4 Brightness uniformity
The test standard conditions refer to Sec 3.3.
)(backlight points nine of luminance Min.
)(backlight points nine of luminance Max.
%≥75
7
Page 9
Acer Acer –LCD-G195W
3.5 Audio Signal(option)
Items
Min TYP MAX
Input impedance(Ω)
Frequency response range(Hz)
Signal to noise ratio(dB)
Output power(W)
10k
200
40
0.8 1.0 1.2
4. Input / Output Signal Specifications
4.1 Video signals
Analog
Sync: TTL level (Input impedance ≧ 1k Ohm)
Digital : TMDS Signal: (min) ±200mVpp@24Bit
4.2 Signal Timing
RGB signal: 0.7Vp-p (Input impedance = 75 Ohm)
Positive and negative sync of Separate Horizontal/Vertical Sync
Through D-SUB/DVI connectors, this unit can support FH= 31~80 KHz, Fv=55~75Hz,
Mode
Resolution
(active dot)
Resolution
(total dot)
Specification
--- ---
--- 20k
--- ---
Horizontal
Frequency (KHz)
TEST CONDITIONS
THD+N = 10%﹐@1KHz 1Vrms
THD+N = 10%﹐@1KHz 1Vrms
Vertical
Frequency (Hz)
Nominal Pixel
Clock (MHz)
EDID
640x480@60Hz 800 x 525 31.469 59.941 25.175
MAC 640x480@66.66Hz 864x525 35 66.66 30.24
VESA 720x400@70Hz 900x449 31.469 70.087 28.322
SVGA
MAC 832x624@74.55Hz 1152x667 49.722 74.55 57.28
XGA
MAC 1152x870@75Hz 1456x915 68.681 75.062 100.000
VESA
SXGA
640x480@72Hz 832 x 520 37.861 72.809 31.500
640x480@75Hz 840 x 500 37.500 75.000 31.500
800x600@56Hz 1024 x 625 35.156 56.250 36.000
800x600@60Hz 1056 x 628 37.879 60.317 40.000
800x600@72Hz 1040 x 666 48.077 72.188 50.000
800x600@75Hz 1056x625 46.875 75.000 49.500
1024x768@60Hz 1344x806 48.363 60.004 65.000
1024x768@70Hz 1328x806 56.476 70.069 75.000
1024x768@75Hz 1312x800 60.023 75.029 78.750
1152x864@75Hz 1600x900 67.5 75 108
1280x960@60Hz 1800x1000 60 60 108
1280x1024@60Hz 1688x1066 63.981 60.020 108.000
1280x1024@75Hz 1688x1066 79.976 75.025 135.000
8
23H
23H
23H
23H
23H
23H
23H
24H
24H
24H
24H
24H
24H
25H
26~27H
NA
NA
NA
Page 10
Acer Acer –LCD-G195W
VESA
WXGA
WXGA+
1280x720@60Hz 1650x750 44.955 59.940 74.176
1280x800@60Hz 1680x831 49.702 59.810 83.500
1360x768@60Hz 1792x795 47.712 60.015 85.500
1440x900@60Hz 1904x931 55.935 59.887 106.500
1440x900@75Hz 1936x942 70.635 75.000 136.750
4.3 Timing requirements
Scan Frequency Condition Specification
28~29H
2A~2BH
NA
2C~2DH
NA
Horizontal
Vertical
Out of range
4.4 DDC date
G195W Analog
Sync polarity: (+) or (-)
Sync polarity: (+) or (-)
Excluding
Horizontal 30~80 KHz or
Vertical 55-75 Hz
30 ~ 80 KHz.
55-75Hz
Message “Input Not Supported” on screen
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 FF FF FF FF FF FF 00 04 72 1E 01 00 00 00 00
0
24 13 01 03 08 29 1A 78 EA D7 A5 A2 59 4A 96 24
1
14 50 54 BF EE 80 71 4F 81 C0 81 00 95 00 01 01
2
01 01 01 01 01 01 9A 29 A0 D0 51 84 22 30 50 98
3
36 00 9A 00 11 00 00 1C 00 00 00 FF 00 30 30 30
4
30 30 30 30 30 30 30 30 30 0A 00 00 00 FD 00 37
5
4B 1E 50 0E 00 0A 20 20 20 20 20 20 00 00 00 FC
6
00 47 31 39 35 57 0A 20 20 20 20 20 20 20 00 9A
7
G195W DVI
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 FF FF FF FF FF FF 00 04 72 1E 01 00 00 00 00
0
24 13 01 03 80 29 1A 78 EA D7 A5 A2 59 4A 96 24
1
14 50 54 BF EE 80 71 4F 81 C0 81 00 95 00 01 01
2
01 01 01 01 01 01 9A 29 A0 D0 51 84 22 30 50 98
3
36 00 9A 00 11 00 00 1C 00 00 00 FF 00 30 30 30
4
30 30 30 30 30 30 30 30 30 0A 00 00 00 FD 00 37
5
4B 1E 50 0E 00 0A 20 20 20 20 20 20 00 00 00 FC
6
00 47 31 39 35 57 0A 20 20 20 20 20 20 20 00 22
7
5. LCD Characteristic & Performance
All the tests to verify specifications in this section shall be performed under the following standard conditions unless
otherwise noted. The standard conditions are:
9
Page 11
Acer Acer –LCD-G195W
Temperature : 25 ± 5°C
Warm-up time : 30 minutes minimum
Checking display modes : All the specified modes
5.1 Panel general specifications
5.1.1 General specifications
INL
Supplier
Model name
Display Area 408.24 ( H ) x255.15 ( V ) , 19W” diagonal
Pixel Pitch 0.3(H) x 0.3(V)
Display Colors: 16.7 Million (RGB 6-bit + HiFRC)
Number of Pixel 1440x900 pixels
Pixel Arrangement RGB vertical stripe
Brightness 300cd/m2 (Typ.) 250cd/m2 (Min.)
Contrast Ratio 1000:1 Typical
Viewing Angle H.160, V.160 typ. (CR>=10)
Display Mode Normally White
Frame rate 60Hz
Response Time Tr + Tf = 5ms Typical
Surface Treatment
Lamp 4 CCFL
Outline Dimension 428(W)x278(H)x16.5(D) Typ
MT190AW02 V.0
Anti-glare, Haze = 25%,
Hard coating (3H)
Remark: If phase in other second panel, Panel general specifications pls refer to the panel spec
Note : Detial Spec PLS follow panel Spec
5.1.2 LCD module defects
LCD module defects check follows IIS.
6. Function Specifications
6.1 Keypad Function
6.1.1 Control buttons
A. When OSD un-displays, press [AUTO] and the function menu will show on the screen;
[AUTO]
[MENU]
[◄]
B. When function menu displays, press [AUTO] to perform auto-adjustment;
C. When OSD displays, press [AUTO] to return to previous level menu;
D. When “e Color OSD” OSD displays, press [AUTO] to exit the OSD.
A. When OSD isn’t shown on screen, press [MENU] to enter the function menu;
B. When function menu displays, press[MENU]to enter the main menu OSD;
C. When OSD displays, press [MENU] to perform function of menu icon that is highlight or
enter next level menu
A. When OSD isn’t show on screen, press [◄] to enter the function menu;
B. When “MENU OSD” displays, press these keys to change the contents of an
adjustment item, or change an adjustment value;
C. When Function menu displays, press [◄] to show “Audio” OSD and decrease the
volume.
A. When OSD isn’t show on screen, press [►]to enter the function menu;
B. When “MENU OSD” displays, press these keys to change the contents of an
[►]
adjustment item, or change an adjustment value;
C. When Function menu displays:
a. Press [►] key one time to search (a port with signal in order)
10
Page 12
Acer Acer –LCD-G195W
b. Show “source icon” at the same time, as searching that port
c. Go into next port automatically, if search the port without signal
d. Display it, if search the port with signal
D. When the volume menu displays, press [►] to increase the volume.
A. When function menu displays, press [e Color] to show “e Color OSD”, and press
again the OSD can not disappear, but the time of “e Color OSD ”disappearing is reset
[e Color ]
[POWER] Power on or power off the monitor
6.1.2Hot Key Operation
FUNCTION
to 10 seconds again.
B. When OSD disappear not including “e Color OSD”, press [e Color] to show “e Color
OSD” OSD, the OSD before disappears, but the parameters of it should be saved
HOT KEY OPERATION
DESCRIPTION
e Color AUTO MENU
◄ ►
POWER
FACTORY
MODE
●
ON
Press [e], and then press [POWER] for DC
power on. OSD menu will be shown with “F” on
the left top. Select “F” for entering factory mode.
OSD Structure
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote control
unit. The unit shall leave the factory with all OSD controls set to their default values.
First Second Third Fourth
empowering
technology
empowering
technology
--- --- ---
--- --- Standard
Function
Menu
Picture
e-color
Auto --- --- --- ---
Main menu Main menu (Pictiure) --- --- ---
Audio Audio menu --- --- ---
Input --- --- --- ---
Acer eColor Management
Control
Range
Default Value
User mode
Text mode 44
77
Brightness --- ---
Contrast --- ---
H.Position
--- ---
11
0～100
0～100
0～100
Standard mode 77
Graphics mode
Movie mode
User mode
Text mode
Standard mode
Graphics mode
Movie mode
50
97
77
50
50
50
60
56
Page 13
Acer Acer –LCD-G195W
V.Position
0～100
50
Focus
Clock
Warm --- --- Default
Cool --- --- ---
Colour Temp
User
Auto Config --- --- --- ---
OSD OSD Timeout --- ---
Volume ----- -----
Wide Mode
DDC/CI --- --- --- ON
ACM --- --- --- OFF
Input
Full --- --- Default
Aspect --- --- ---
VGA
Red
Green
Blue
--- --- ---
0～100
0～100
0～100
0～100
0～100
10～120
0～100
---
50 ○1
80
80
80
10
50
Setting
Info
DVI
EMEA NO-EMEA
English English --- ---
Russian
Deutsch Deutsch --- ---
Language
Reset --- --- --- ---
Resolution --- --- --- ---
H.Freq --- --- --- ---
V.Freq --- --- --- ---
Input Type --- --- --- ---
Français Français --- ---
Español Español --- ---
Italiano Italiano --- ---
Dutch
Finnish
繁體中文
简体中文
日本語
--- --- ---
--- ---
--- ---
English
--- ---
--- ---
S/N --- --- --- ---
volume 50
Notes; ○1 Clock default 50 is for Visa timing. Others depend on timing.
6.3 OSD Translation
(
NO_EMEA
)
12
Page 14
Acer Acer –LCD-G195W
1.English
(英语)
2.繁體中
文
3.Deutsch
(德语)
4.Français
(法语)
5.Español
(西班牙语)
6.Italiano
(意大利语)
7.简体中文 8.日本語
Picture
Brightness
Contrast
H.Position
V.Position
Focus
Clock
Colour
Temp
Warm
Cool
User
Red
Green
Blue
Auto Config
畫面
亮度
對比
水平位置
垂直位置
相位
時脈
色溫
暖色溫
冷色溫
使用者設
定
紅色
綠色
藍色
自動調整
Bild Image Imagen Immagine
Helligkeit Luminosité Brillo Luminosità
Kontrast Contraste Contraste Contrasto
H.Position H.Position H.Posicion O.Posizione
V.Position V.Position V.Posicion V.Posizione
Fokus Netteté Nitidez Nitidezza
Takt Fréquence Reloj Orologio
Farbtemp. Temp. Couleur Temp. Color Temp. Colore
Warm Chaud Càlido Caldo
Kalt Clair Frio Freddo
Anwender Utilisateur Usuario Utente
Rot Rouge Rojo Rossa
Grün Vert Verde Verde
Blau Bleu Azul Blu
Autom. Abgl. Autoréglage Autoajuste Autoregolazione
画面 ピクチャー
亮度
对比度
水平位置 水平位置
垂直位置 垂直位置
相位 フェーズ
时序 クロック
色温
暖色温 暖色
冷色温 寒色
使用者设定
红色 赤
绿色 緑
蓝色 青
自动调整 自動調整
輝度
コントラス
ト
色溫度
ユーザー設
定
OSD OSD
OSD
Timeout
Setting
Wide Mode
Full
Aspect Aspect
Input
Language
Reset
Please Wait
Information
Exit
Enter
Move
ON
OFF
OSD 顯示
時間設定
設定
寬螢幕模式
全螢幕
輸入
語言
恢復出廠模
式
請稍待
資訊
結束調整
進入
移動
開 EIN Allumé ACTIVADO ATTIVA 开启 オン
關 Aus OffEteinte Apagado Spento 关闭 オフ
OSD-Dauer Délai de l'OSD
Einstellung Réglages Configuración Impostazione
Vollbild Plein écran Completa Schermo intero
Vollbild Plein écran Completa Pieno
Eingang Entrée Entrada Input
Sprache Langue Idioma Lingua
Rücksetzen Restaurer Reiniciar Resetare
Bitte warten
Information Informations Información Informazioni
Beenden Quitter Salida Uscita
Eingabe Entrez Introducir Invio
Beweg. Dépla. Mover Muovi
Veuillez
patienter
T. de espera
OSD
Espere, por
favor
Intervallo OSD
Attendere prego
OSD 显示时
间设定
设置 設定
宽屏模式
全屏 全画面
输入 入力
语言
恢复出厂模
式
请稍待
信息
退出菜单 終了
进入 選択
移动 移動
OSD 表示時
間設定
ワイドモー
言語
リセット
お待ちくだ
さい
情報
ド
Message menu: (NON_EMEA)
English
(英语)
繁體中文
Deutsch
(德语)
Français
(法语)
Español
(西班牙语)
13
Italiano
(意大利语)
简体中文 日本語
Page 15
Acer Acer –LCD-G195W
Auto Config
Please Wait
Cable Not
Connected
Input Not
Supported
No Signal
自動調整
請稍待
無訊號線
連接
不支援
輸入訊號
無訊號
Color management OSD
English
(英语)
Standard
Text
Graphics
Movie
繁體中文
標準
文字
圖形
電影
Autom. Abgl.
Bitte warten
Leitung nicht
angeschlossen
Frequenzen
nicht
unterstützt
Autoréglage
Veuillez
patienter
Câble non
connecté
Fréquences
non
supportées
Autoajuste
Espere, por
favor
Cable no
conectado
Frequencias no
soportadas
Autoregolazione
Attendere prego
Cavo non
connesso
Frequenza
non supportata
Kein signal Pas de signal Sin señal Assenza segnale
(scenario OSD)
Deutsch
(德语)
Standard Standard Estándar Standard
Text Texte Texto Testo
Grafiken Images Gráficos Grafica
Spielfilm Film Película Film
language: (NON_EMEA)
Français
(法语)
Español
(西班牙语)
Italiano
(意大利语)
自动调整
请稍待
信号线
无连接
输入
不支援
自動調整
お待ちください
ケーブルが接続さ
いません
入力はサポートさ
いません
无讯号 信号なし
简体中文 日本語
标准 標準
文本 テキスト
图形 グラフィックス
电影 ムービー
れて
れて
User
Adjust/Exit
Select
使用者
調整/結束
選擇
Benutzer Utilisateur Usuario Utente
Abstimmen/
Beenden
Auswahl Sélectionner Seleccionar Seleziona
Ajuster/Quitter Ajuste/salir Regola/Esci
用户 ユーザー
调节/退出 調整/終了
选取 選択
(EMEA)
1.English
(英语)
Picture Изображ. Bild Image Imagen Immagine Beeld Kuva
Brightness Яркость Helligkeit Luminosité Brillo Luminosità Helderheid Kirkkaus
Contrast Контрастность Kontrast Contraste Contraste Contrasto Contrast Kontrasti
H.Position Полож. по гориз. H.Position H.Position H.Posicion O.Posizione H. positie Vaakasijainti
V.Position Полож. по верт. V.Position V.Position V.Posicion V.Posizione V. positie Pystysijainti
Focus Фокусировка Fokus Netteté Nitidez Nitidezza Scherpstelling Tarkennus
Clock Частота Takt Fréquence Reloj Orologio Klok Taajuus
Colour Temp Цвет.темп. Farbtemperatur
Warm Теплый Warm Chaud Càlido Caldo Warm Lämmin
Cool Холодный Kalt Clair Frio Freddo Koel Viileä
User Пользоват. Anwender Utilisateur Usuario Utente Gebruiker Käyttäjä
Red Красный Rot Rouge Rojo Rossa Rood Punainen
2.Russian
(俄语)
3.Deutsch
(德语)
4.Français
(法语)
Te mp .
Couleur
5.Español
(西班牙语)
Temp. Color Temp. Colore Kleurtemp. Värin lämpöisyys
6.Italiano
(意大利语)
7.Dutch
(荷兰语)
8.Finnish
(芬兰语)
Green Зеленый Grün Vert Verde Verde Groen Vihreä
Blue Синий Blau Bleu Azul Blu Blauw Sininen
Auto Config Автонастройка Autom. Abgl. Autoréglage Autoajuste Autoregolazione Autom.configuratie Autom. asetukset
OSD OSD
OSD Timeout Вр. отобр. Меню OSD-Dauer
Délai de
l'OSD
T. de espera
OSD
14
Intervallo OSD Time-out OSD Aikakatkaisu
Page 16
Acer Acer –LCD-G195W
Setting Настр. Einstellung Réglages Configuración Impostazione Instelling Asetus
Wide Mode Широкоэк.реж. Bildformate Mode Large
Full Полное Vollbild Plein écran Completa Pieno Volledig Täysikuva
Aspect Aspect
Input Вход Eingang Entrée Entrada Input Ingang Tulo
Volume Громкость Lautstärke Volume Volumen Volume Volume
Reset Сброс Rücksetzen Restaurer Reiniciar Resetare Opn.instellen Nollaus
Please Wait Подождите Bitte warten
Information Информация Info Informations Información Informazioni Informatie Informaatio
Exit Выход Beenden Quitter Salida Uscita Afsluiten Lopeta
Enter Ввод Eingabe Entrez Introducir Invio Enter Syötä
DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI
ON Вкл EIN Allumé ACTIVADO ATTIVA AAN PÄÄLLÄ <ON>
OFF Выкл Aus OffEteinte Apagado Spento Uit Pois päältä
Veuillez
patienter
Modo
panorámico
Espere, por
favor
Modo Wide Breedbeeldmodus Laajakuva
Äänenvoim.
Attendere prego Een ogenblik geduld Odota
Message menu: (EMEA)
English
(英语)
Auto Config
Please Wait
Cable Not
Connected
Input Not
Supported
No Signal Нет сигнала Kein signal Pas de signal Sin señal Assenza segnale Geen signaal Ei signaalia
Color management OSD
Russian
(俄语)
Автонастройка,
подождите...
Кабель не
подключен
Вход не
поддерживается
Deutsch
(德语)
Autom. Abgl.
Bitte warten
Leitung nicht
angeschlossen
Frequenzen
nicht
unterstützt
(scenario OSD)
Français
(法语)
Autoréglage
Veuillez patienter
Câble non
connecté
Fréquences non
supportées
Español
(西班牙语)
Autoajuste
Espere, por
favor
Cable no
conectado
Frequencias no
soportadas
language: (EMEA)
Italiano
(意大利语)
Autoregolazione
Attendere prego
Cavo non
connesso
Frequenza
non supportata
Dutch
(荷兰语)
Bezig met
automatische
configuratie, een
ogenblik geduld
Kabel niet
aangesloten
Ingang niet
ondersteund
Finnish
(芬兰语)
Autom.
asetukset.
Odota
Kaapeli ei
kiinni
Tuloa ei tueta
English
(英语)
Standard Стандарт Standard Standard Estándar Standard Standaard Vakio
Text Текст Text Te xte Tex t o Tes to Tek st Tek s ti
Graphics Изображение Grafiken Images Gráficos Grafica Grafische Grafiikka
Movie Кино Spielfilm Film Película Film Film Elokuva
User Пользователь Benutzer Utilisateur Usuario Utente Gebruiker Käyttäjä
Russian
(俄语)
Deutsch
(德语)
Français
(法语)
15
Español
(西班牙语)
Italiano
(意大利语)
Dutch
(荷兰语)
Finnish
(芬兰语)
Page 17
Acer Acer –LCD-G195W
Adjust/Exit Настроить /Выход
7. Mechanical
7.1 Dimension
Abstimmen/Be
enden
Ajuster/Quitter Ajuste/salir Regola/Esci
Aanpassen/verl
aten
Säädä/Lopeta
Dimension
Width
Height
Depth
Monitor Weight
7.2 Cabinet Material
Cabinet Material Spec
Cabinet Plastic Material
Front Bezel
Back Cover
Base
Cabinet Texture ACER SPECIFICATION
7.3 Mechanical Specification
Mechanical Spec
Bezel Gap Specification
Screen printed Parts Front bezel
INL
451.45mm
375.04mm(W/Base),
369.03mm(W/O Base)
173.48mm(W/Base),
92.96mm(W/O Base)
4.30±0.3Kg
ABS
BLACK
BLACK
BLACK
≦1.2mm
7.4 Base Mechanical Interface
items Spec
Tilt
Wall Mount
8. Package
7.1 Unit Package Specification
7.1.1 Units package
Items
Packaging Refer to ME PACKING SPEC
Ink TBD
Length 504+/-2.0mm
Height 420+/-2.0mm
Width 127+/-2.0mm
Gross Weight 4.3±0.5kg
Units per Pallet 90sets/pallet
40’ /20’ Container Loading, Palletized 1980sets/900sets
7.1.2 Unit Packing Vibration
Testing with vibration shall be done in each of three mutually perpendicular axes. Axes are referenced to the
position of system as it normally sits in front of user, i.e., Front-to-back, side-to-side and top-to-bottom.
Compliance with TCO03, -4°(+/-1°) ~+14°(+/-1°)
100mm x 100 mm
Spec
16
Page 18
Acer Acer –LCD-G195W
7.1.2.1 Random Vibration
Items Description
Sweep Frequency 1~200Hz
Amplitude 1.14 Grms
Duration Time 30 minute each axis
Direction 3 mutually perpendicular axes (x, y, z)
RANDOM VIBRATION SPECTRUM BREAK POINTS
Frequency (Hz) PSD, G2/Hz
1 0.0001
4 0.01
100 0.01
200 0.001
7.1.3 Non operation Thermal Shock
Item Description
Temperature -200C to 600C
Test
25
Reset cycles times
Total cycles 3 cycles
7.1.4
Package Drop
Drop height
Select drop height according to the gross weight refer to the table at below
Gross Weight(kg)
Drop Height(cm)
ºC>60ºC (10hrs)>25ºC (2hrs)>-20ºC (10hrs)>25ºC
3cycles ,
every transition time 0.5 hr,
1.0<W≦9.0
76
(
Drop sequence and orientation
Drop Drop onto Type Drop Figure
Step 1 Corner(2-3-5)of package Corner
Step 2 Edge(3-5) of package Edge
Step 3 Edge(2-3) of package Edge
Step 4 Edge(2-5) of package Edge
Step 5 Face(bottom-3)of package Flat
3
Step 6 Face(left-4) of package Flat
EMBED AutoCAD.Drawing.16
!!45
Step 7 Face(front-5) of package Flat
Step 8 Face(right-2) of package Flat
Step 9 Face(rear-6) of package Flat
Step 10 Face(Top-1) of package Flat
Mechanical and electrical damage should not exist after vibration test, and shall be submitted for approval
customer before mass production.
9.
Marking and Identification
17
Page 19
Acer Acer –LCD-G195W
9.1 S/N Label
The approval marking is required by the countries of sales destination.
9.2 Carton label
The approval marking is required by the c
ountries of sales destination.
18
Page 20
Page 21
Acer Acer –LCD-G195W
2. Flat Panel Specification
19
Page 22
A．General specification
NO. Item Specification Remark
SPEC NO.
PAGE
MT190AW02 V.Y
4/23
1 Display resolution (pixel)
2 Active area (mm)
3 Screen size (inch)
4 Pixel pitch (mm)
5 Color configuration
6 Overall dimension (mm)
7 Weight (g)
8 Surface treatment
9 Input color signal
10 Display colors
11 Color saturation
1,440(H) X 900(V), WXGA+ resolution
408.24(H) X 255.15(V)
19 inches diagonal
0.2835(H) X 0.2835(V)
R, G, B vertical stripe
428 (W) X 278 (H) X 16.5 (D) (Max)
2200 (max)
Anti-Glare, Haze=25%, Hard coating (3H) Note 1
8 bit LVDS
16.7M (6 bit with Hi-FRC)
72% NTSC
11 Optimum viewing direction
12 Backlight
13 RoHS & Halogen free
14 TCO’03
Note 1：Glare Option available
Note 2：Only Anti-Glare model can meet TCO’03 compliance
6 o’clock
4 CCFL
RoHS & Halogen free compliance
TCO’03 compliance Note 2
Page 23
SPEC NO.
PAGE
B. Electrical specifications
1.Pin assignment
Connector
FOXCONN GS23302-0311S-7F or mechanical interface equivalent connector.
Pin No Symbol Description
Frame VSS Ground
1 RXinO0- -LVDS differential data input, Chan 0-Odd
2 RXinO0+ +LVDS differential data input, Chan 0-Odd
3 RXinO1- -LVDS differential data input, Chan 1-Odd
4 RXinO1+ +LVDS differential data input, Chan 1-Odd
5 RXinO2- -LVDS differential data input, Chan 2-Odd
6 RXinO2+ +LVDS differential data input, Chan 2-Odd
7 VSS Ground
MT190AW02 V.Y
5/23
8 RXOC- -LVDS differential Clock input (Odd)
9 RXOC+ +LVDS differential Clock input (Odd)
10 RXinO3- -LVDS differential data input, Chan 3-Odd
11 RXinO3+ +LVDS differential data input, Chan 3-Odd
12 RXinE0- -LVDS differential data input, Chan 0-Even
13 RXinE0+ +LVDS differential data input, Chan 0-Even
14 VSS Ground
15 RXinE1- -LVDS differential data input, Chan 1-Even
16 RXinE1+ +LVDS differential data input, Chan 1-Even
17 VSS Ground
18 RXinE2- -LVDS differential data input, Chan 2-Even
19 RXinE2+ +LVDS differential data input, Chan 2-Even
20 RXEC- -LVDS differential Clock input (Even)
21 RXEC+ +LVDS differential Clock input (Even)
22 RXinE3- -LVDS differential data input, Chan 3-Even
23 RXinE3+ +LVDS differential data input, Chan 3-Even
24 VSS Ground
25 NC No Connection
26 NC No Connection
27 NC No Connection
28 VCC +5.0V power supply
29 VCC +5.0V power supply
30 VCC +5.0V power supply
Frame VSS Ground
Page 24
SPEC NO.
PAGE
MT190AW02 V.Y
6/23
Top view of LVDS connector
Rear view of LVDS connector
Page 25
2. Absolute maximum ratings
SPEC NO.
PAGE
MT190AW02 V.Y
7/23
Parameter Symbol
Min.
Power voltage Vcc
Input signal voltage VLH
Operating temperature Top
Storage temperature TST
CCFL Current ICFL 2.0 7.0 7.5 [mA]
Note 1: The relative humidity must not exceed 90% non-condensing at temperatures of 40°C or less.
At temperatures greater than 40°C, the wet bulb temperature must not exceed 39°C.
Note 2: The unit should not be exposed to corrosive chemicals.
-0.3 -
-0.3 -
0 -
-20 -
Values
Typ .
Max.
6.0 V At 25°C
4.3 V At 25°C
50 °C Note 1
60 °C Note 2
Unit
Remark
Page 26
3. Electrical characteristics
a. Typical operating conditions
Item Symbol Min. Typ. Max. Unit Remark
SPEC NO.
PAGE
MT190AW02 V.Y
8/23
Input Voltage
Permissive Power Input Ripple
Input Current
Rush Current
Logic Input
Voltage
LVD S :
IN+, IN-
Common Mode Voltage
Differential Input Voltage
Threshold Voltage (High)
Threshold Voltage (Low)
Black
White
Mosaic
V
4.5 5 5.5
cc
V
- -
RF
0.15
Icc - 700 1000
Icc - 500 700
I
- 700 1000
cc
I
- 1.6 3
Rush
VCM - 1.2 -
VID 100 - 600
VTH - - 100
VTL -100 - -
V
V
Note 1
mA
A Note 4
V
mV
mV Note 5
mV Note 5
Note 2
Note 3
Note 1 : The specified current is under the Vcc =5V, 25 °C, fv=60Hz (frame frequency) condition
whereas black pattern is displayed.
Note 2 : The specified current is under the Vcc =5V, 25 °C, fv=60Hz (frame frequency) condition
whereas white pattern is displayed.
Note 3 : The specified current is under the Vcc =5V, 25 °C, fv=60Hz (frame frequency) condition
whereas mosaic pattern(black & white [8*6] ) is displayed.
White : 255 Gray
Black : 0 Gray
Page 27
Note 4 : test condition :‘
SPEC NO.
PAGE
MT190AW02 V.Y
9/23
(1) V
= 5 V, V
DD
DD
(2) Pattern: Mosaic pattern
90%
10%
(3) Test circuit
CONTROL SIGNAL
(HIGH to LOW)
rising time = 470 µs ± 10%
V
DD
Ton=470 μs ± 10%
5 V
R1
47K
R2
1K
12V
R3
C2
M1
2SK1059
M2
2SK1399
FUSE
VDD ( LCD INPUT)
C1
1uF
Note 5: LVDS signal definition
VIN+ = Positive differential DATA & CLK Input
VIN- = Negative differential DATA & CLK Input
VID = VIN+ – VIN- ,
∆VCM =｜VCM
∆VID =｜VID
VID+ =｜VIH
VID- =｜VIL
–VCM-｜,
+
–VID-｜,
+
–VIH-｜,
+
–VIL-｜,
+
C3
1uF
47K
10000pF
VCM = (VIN
VCM+ = (VIH
VCM- = (VIL
+VIN-)/2,
+
+VIH-)/2,
+
+VIL-)/2,
+
Page 28
SPEC NO.
PAGE
MT190AW02 V.Y
10/23
Note 6 : Power on sequence for LCD V
T1
Panel Power
Supply V
DC
90%
10%
90% 90%
Interface
Signals
T2
Backlight Power
Supply
DD
Valid Interface Data
90%
90%
90%
T5
T6
10%
T7
10%
T3 T4
Parameter Value Unit
Min Typ Max ms
T1 0.1 - 10 ms
T2 0 30 50 ms
T3 200 250 - ms
T4 100 250 - ms
T5 0 20 50 ms
T6 0.1 - 50 ms
T7 1000 - - ms
Page 29
SPEC NO.
PAGE
MT190AW02 V.Y
11/23
b. Display color vs. input data signals
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input
for the color; the higher the binary input, the brighter the color. The table below provides a reference for
color versus data input.
Color
MSB LSB MSB LSB MSB LSB
R7 R6 R5 R4 R3 R2 R1 R0
Red Green Blue
Input color data
G7 G6 G5 G4 G3 G2 G1 G0
B7 B6 B5 B4 B3 B2 B1 B0
Basic
colors
Black
Red(255)
Green(255)
Blue(255)
Cyan
Magenta
Yellow
White
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
0
0
0
1
1
1
0
1
1
1
0
0
0
0
1
1
0
0
0
1
1
1
1
1
1
1
0
0
0
1
1
0
0
1
1
0
0
1
1
1
1
0
0
0
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
0
1
1
1
0
0
1
1
1
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
Red
Green
Red(000) dark
Red(001)
Red(002)
:
Red(253)
Red(254)
Red(255) bright
Green(000)dark
Green(001)
Green(002)
:
Green(253)
Green(254)
Green(255)
bright
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
1
0
0
0
0
0
0
:
:
:
0
1
1
0
0
0
:
:
0
0
0
:
:
:
:
1
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
1
1
0
1
1
0
1
1
0
0
0
0
0
0
0
0
:
:
1
1
1
1
1
1
1
1
1
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
0
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
1
1
0
:
:
0
1
1
0
1
1
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Blue
Blue(000) dark
Blue(001)
Blue(002)
:
Blue(253)
Blue(254)
Blue(255) bright
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
0
0
0
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
0
0
1
1
1
1
1
1
0
0
1
1
1
1
1
1
0
0
1
1
1
1
1
1
0
1
:
:
:
1
0
0
1
1
1
Page 30
SPEC NO.
PAGE
MT190AW02 V.Y
12/23
c. Input signal timing
Support Input Timing Table
Item Description Min. Typ. Max. Unit
Dclk
period 17.24 22.5 27 nS Clock
frequency 37 44.4 58 MHz
Vertical
Horizontal
T
V_TOTAL
T
T
H_TOTAL
T
V total line number 905 926 942 T
Data duration
V_DATA
－
900
TVB V-blank 5 26
f
frequency 50 60 75 Hz
V
－
－
H_TOTAL
T
H_TOTAL
T
H_TOTAL
H total pixel number 752 800 968 DClk
Data duration
H_DATA
H-blank 32 80
T
HB
－
720
－
－
DClk
DClk
Note: Because this module is operated by DE only mode, Hsync and Vsync input signals should be set
to low Logic level or ground. Otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
DE
DCLK
DE
DATA
Tc
Tv
Tvd Tvb
Thb Thd
Page 31
SPEC NO.
PAGE
MT190AW02 V.Y
13/23
d. Display Position
D(1, 1) D(2, 1) …… D(720, 1) …… D(1439, 1) D(1440, 1)
D(1, 2) D(2, 2) …… D(720, 2) …… D(1439, 2) D(1440, 2)
.
.
.
D(1, 450) D(2, 450) …… D(720, 450) …… D(1439, 450) D(1440, 450)
.
.
.
D(1, 899) D(2, 899) …… D(720, 899) …… D(1439, 899) D(1440, 899)
D(1, 900) D(2, 900) …… D(720, 900) …… D(1439, 900) D(1440, 900)
……
……
.
.
.
.
.
.
……
……
.
.
.
.
.
.
.
.
.
.
.
.
e. Backlight driving conditions
Parameter Symbol Min. Typ. Max. Unit Remark Remark
Lamp voltage VL 660 730 800 Vrms I=7.0mA Note 1
Lamp operation current
Lamp starting voltage VLstart
Frequency F 40 - 60 KHZ Note 6
Lamp life time - 50000 - Hr Note 7
IL 2.0 7.0 7.5 mArms Note 2
1450 - - T = 25°C Note 3,4,5,6
1700 - -
Vrms
T = 0°C Note 3,4,5,6
Note: The waveform of the voltage output of inverter must be area-symmetric and the design of the
inverter must have specifications for the modularized lamp. The performance of the Backlight,
such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter
for the lamp. All the parameters of an inverter should be carefully designed to avoid producing
too much current leakage from high voltage output of the inverter. When designing or ordering
the inverter please make sure that a poor lighting caused by the mismatch of the Backlight and
the inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the
module should be operated in the same manners when it is installed in your instrument.
Note 1: Lamp voltage is specified under
IL = 7.0mArms.
Note 2: The degree of unbalance: less than 10%
The ratio of wave height: less than
10%2 ±
Ip
Ip: high side peak
I-p
I-p: low side peak
The degree of unbalance = |Ip-I-p| /Irms*100(%)
The ratio of wave height = Ip (or I-p)/Irms
Lamp should be completely turned on.
Page 32
Note 3: Test equipment: AS-114B
Note 4: The voltage shown above should be applied to the lamp for more than 1 second after startup.
Otherwise, the lamp may not be turned on normally.
Note 5: Inverter should provide more than min. value, and then lamp could be completely turned on
Note 6: Lamp frequency may produce interference with horizontal synchronous frequency and this may
cause line flow on the display. Therefore lamp frequency shall be detached from the horizontal
synchronous frequency and its harmonics as far as possible in order to avoid interference.
Note 7: Life time (Hr) is defined as the time when brightness of a lamp unit itself becomes 50% or less
SPEC NO.
PAGE
MT190AW02 V.Y
14/23
than its original value at the condition of Ta = 25±2°C and IL = 7.0mArms.
Backlight connecter: 3500IHS-02L
Pin no. Symbol Function Remark
1 VIH Lamp high voltage input Cable color: Pink
2 VIL Lamp low voltage input Cable color: White
3 VIH Lamp high voltage input Cable color: Blue
4 VIL Lamp low voltage input Cable color: Black
Page 33
yp
C. Optical specifications
SPEC NO.
PAGE
MT190AW02 V.Y
15/23
Item Symbol Condition
Response time
Contrast ratio
Viewing angle
Tr
Tf
Tr+Tf
CR
Top
Bottom
Left
Right
θ= 0∘
θ= 0∘
CR≧10
CR≧10
CR≧10
CR≧10
Specification
Min. T
- 1.5 4
- 3.5 6
- 5 10
700 1000 -
70 80 -
70 80 -
75 85 -
75 85 -
.Max.
Unit Remark
ms Note 4
deg. Note 3,5,7
Note 3,5
Brightness (Center)
Wx
Color chromaticity(CIE)
Wy
White uniformity (9) δW
Cross talk Ct
YL
Rx
Ry
Gx
Gy
Bx
By
θ= 0∘
250 300 -
0.313
0.329
0.640
-0.03
0.75 0.80 -
- - 2%
0.349
0.284
0.617
0.142
0.067
+0.03
nit Note 3,6
Note 3
Note 3,8
Note 9
Note 1: Ambient temperature = 25°C.
Note 2: To be measured in dark room after backlight warm up 30 minutes.
Note 3: To be measured with a viewing cone of 2°by Topcon luminance meter BM-5A.
Note 4: Definition of response time:
The output signals of BM-7 are measured when the input signals are changed from “Black”
to “White” (falling time) and from “White” to “Black” (rising time), respectively. The response time
interval is between the 10% and 90% of amplitudes. Refer to figure as below.
Page 34
)
SPEC NO.
PAGE
MT190AW02 V.Y
16/23
100%
S
i
90%
g
n
a
l
(
R
e
l
a
t
i
v
e
v
a
l
u
10%
e
)
0%
Note 5: Definition of contrast ratio:
Contrast ratio is calculated by the following formula.
Contrast ratio (CR
=
Note 6: Driving conditions for CCFL: I
Note 7: Definition of viewing angle
"Black"
Tr
Brightness on the "white" state
Brightness on the "black" state
= 7.0 mA, 50 KHz Frequency.
L
"White""White"
Tf
Note 8: Definition white uniformity:
Luminance are measured at the following nine points (P1~P9).
δ
Minimum Brightness of nine points(P1~P9).
=
Maximum Brightness of nine points (P1~P9).
Page 35
Note 9:
SPEC NO.
1/2
1/6
PAGE
2/3 1/3
A
1/6
A’
127 gray level 127 gray level
B
1/2
1/2
MT190AW02 V.Y
17/23
1/6
1/6
1/3
1/2
B’
2/3
l L
l L
l / LA x 100%= 2% max., LA and LA’ are brightness at location A and A’
A-LA’
l / LB x 100%= 2% max., LB and LB’ are brightness at location B and B’
B-LB’
Note 10: Optical characteristic measurement setup.
0 gray level
Page 36
D. Reliability test items
Test Item Test Condition Judgment Remark
SPEC NO.
PAGE
MT190AW02 V.Y
18/23
High temperature storage
Low temperature storage
High temperature & high
humidity operation
High temperature operation
Low temperature operation
Thermal Shock
(non-operation)
Electrostatic discharge (ESD)
Vibration
(non-operation)
60°C, 240Hrs
-20°C, 240Hrs
40°C, 90%RH, 240Hrs
(No condensation)
50°C, 240Hrs
0°C, 240Hrs
-20°C~60°C
1Hr, 1Hr, 100cycles
Contact:+/-8kV, 150pF(330ohms), 16 points,
10 times/1 point, 1 time/1 sec
Air discharge:+/-15kV, 150pF(330ohms),
9points, 10 times/1 point, 1 time/1 sec
Vibration level : 1.5G
Bandwidth : 10-300Hz
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Note 1 Note 2
Mechanical Shock
(non-operation)
MTBF Demonstration 50,000 hours (Typ.) with confidence level 90% Note 1 Note 3
Waveform : sine wave,
sweep rate : 10min
30 min for each direction X, Y, Z
(1.5 Hrs in total)
Shock level : 50G, 11ms
Waveform : Half sine wave
Direction : ±X, ±Y, ±Z
One time each direction
Note 1 Note 2
Note1: Pass: Normal display image with no obvious non-uniformity and no line defect.
Partial transformation of the module parts should be ignored.
Fail: No display image, obvious non-uniformity, or line defects.
Note2: Evaluation should be tested after storage at room temperature for one hour.
Note 3: The MTBF calculation is based on the assumption that the failure rate distribution meets the
Exponential Model (CCFL excluded)
Page 37
SPEC NO.
PAGE
MT190AW02 V.Y
19/23
E. Safety
(1) Sharp Edge Requirements
There will be no sharp edges or corners on the display assembly that could cause injury.
(2) Materials
a. Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are
used, they will be reviewed and approved by the responsible InnoLux Toxicologist.
b. Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in
the module will complete the flammability rating exception approval process. The printed circuit
board will be made from material rated 94-V1 or better. The actual UL flammability rating will be
printed on the printed circuit board.
c. Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them
from being inserted backwards.
F. Display quality
The display quality of the color TFT-LCD module should be in compliance with the
Innolux’s Incoming inspection standard.
G. Handling precaution
The Handling of the TFT-LCD should be in compliance with the Innolux’s handling principle
standard.
Page 38
m
H. Label
(1) Module Label
SPEC NO.
PAGE
MT190AW02 V.Y
20/23
18 mm
MT190AW02 V.Y AM1900006 Yxx
Z1 Z2 Z3 Z4 Z
Z1 'Z2'-Z3' Z4'Z 5'Z 6'Z7'-Z8' - Z9 '- Z10 '- Z11' Z12'-Z13'-Z14' Z15' -Z16 '-Z17 'Z18' Z19' -Z20'Z21'Z22 ' Z
--Z 7--Z8 Z9 Z10 Z
5 Z 6
(a) Model Number: MT190AW02
(b) Version: V.Y
(c) Serial ID I: Z
Z2 Z3 Z4 Z 5 Z
1
Z
6
73 m
11 Z 12
Z8 Z
7
MADE IN XXX
12
9 Z10
'
23
Z
Z
11
Serial No
Code of grade
INL internal use
Serial ID includes the information as below:
1. Manufactured Date: Year: 0~9, for 2000~2009
2. Month: 1~9 & A~C for Jan.~Dec.
3. Date: 1~9 & A~Z (exclude I, O, Q, U) for 1st~31th
4. Code of grade: 1, 2, 3, 5, E
5. Serial No: Module manufacture sequence no
(d) Serial ID II (INL internal use)
INL internal use
Year, Month, Date
INL internal use
Page 39
(2) Carton Label
SPEC NO.
PAGE
MT190AW02 V.Y
21/23
INNOLUX DISPLAY
BOX ID :
60 mm
Model No. MT190AW02 V.Y
AM1900006 YXX
Quantity : 7 PCS
MFG Date: 20XX/XX/XX
QC: Made in XXX
100 mm
(a) Model Number: MT190AW02
(b) Version: V.Y
(c) Packing quantity: 7 pcs
Z1 Z2 Z3 Z4 --Z 5--Z6 Z7 Z8 Z 9
(d) Serial ID: Z
Z2 Z3 Z4 Z 5 Z6 Z
1
7 Z8
Z 9
Serial No
Code of grade
Serial ID includes the information as below:
(a) Manufactured Date: Year: 0~9, for 2000~2009
Month: 1~9 & A~C for Jan.~Dec.
Date: 1~9 & A~Z (exclude I, O, Q, U) for 1st~31th
(b) Code of grade: 1,2, 3, 5, E
(c) Serial No: Module packing sequence no
Year, Month, Date
INL internal use
I. Mechanical drawing
Page 40
Page 41
Page 42
Acer Acer –LCD-G195W
03 Exploded Diagram
3.1 G195W_SCREW_LIST
Fixed
Item Part No. Description Qty
T(kg*cm) Remark
I/F Board to Chassis*1
1
2
3
4
5
509146306200R SCREW,P,CROSS,W/WAS,M3*6,Zn-Cc 5
509000000700R BOLT,#4-40x11.8,Ni ROHS 4
509412610500R SCREW,B,CROSS,B.T-4*10,BLK, ROHS 3
509216607103R SCREW,F,CROSS,M4*7,Zn,NL*4 4
509212606110R SCREW,F,CROSS,T4*6MZn,RoHS(5.8*6.4) 8
3.2. LCD Exploded drawing (All)
5.0±0.5
4.0±0.5
12±1
12±0.5
10±0.5
Power Board to Chassis*4
D-SUB CON*2
DVI CON*2
Hinge to Stand
Hinge to chassis
Base plate to base
23
Page 43
04 Trouble shooting
Page 44
Page 45
Page 46
t
y
t
4.4 No Power & Power LED Off
No power
Check primary rectifier
voltage
Check pin6 of IC802
voltage about 16V
Check pin2 of IC802 voltage
abou
3V
Check circuit if
short
Check F801, P801,
RT,801,D801
CheckC810,D803,C807,
Check primary OVP, OLP and
secondar
Check IC802,
C804, T801,
feedback, OVP circui
END
Page 47
g
4.5 DC output voltage is unstable
Unstable power
Check sampling
Check the R pin
volta
e of IC803
Check pin7 of
IC802 voltage
Check
R822,R825,R826,
Check the C pin
voltage of IC803
Check R832
Check D803,C807,C810 if
R822,R825,R826,
Change IC803
short
Check pin3 of
IC802 voltage
Change R833,R835,R805,R834
END
Change D803,C807,C810
Page 48
4.6 Backlight can’t be turned on
N
o raster?
Yes
LED Green?
Yes
Backlight can’t be
turned on.
Yes
Is there 5Vdc voltage
on pin2 of IC501?
Yes
Is there high-level voltage on
pin6 of IC501?
Yes
Are connected rightly
CN501, CN502, CN503
Yes
Is there instantaneously pulse
wave on pin1, pin16 of IC501
at the moment of restart?
Yes
Is ok T501, T502?
No
No
No
Check power
supply
Is Ok R505?
No
No
Yes
No
Is Ok IC501?
No
Check I/F board
R505 open
Connecting the
output connector
again
Yes
U501, U502 fail
IC501 fail
T501, T502 fail
Check feedback circuit
ISEN1,ISEN2,VSEN,OLP1,OLP2
END
Page 49
05 Spare parts List
PARTNAME
POWER
BOARD
KEYPAD
BOARD
MAIN
BOARD
FFC CABLE
ACER PART
NO.
OEM PART NO DESCRIPTION
55.LKA0J.002 7940F1400600R PCBA,PI/B,W/SPK,LE19AZ-612 ROHS
55.LK60J.003
55.LKA0J.001
794041500000R PCBA,KEYPAD BOARD,LE23AK-612 ROHS
7940F1300600R PCBA,IF/B(VY,EMEA,W/SPK),LE19AZ-612 ROHS
50.LKA0J.001 430303003270R HRN LVDS FFC 30P 184mm W/TASTE
8191AZ61A120R
CN
CABLE
CABLE
CABLE
CABLE
CABLE
HINGE
COVER
HINGE
COVER
50.LK30J.001 430300803760R HRN ASS'Y 280mm 2*4P TO 8P UL1571#28 R
27.LBN0J.001 453070801190R PWRCORD 16A/250V BLK 6FT VDE/KTL H05VV-F
50.L63VF.003 453030300120R CABLE AUDIO 1P 6FT BLACK/GREEN CP03B06P0
50.LBQ0J.001 453010100380R CABLE,D-SUB 15P MALE 6FT BLACK/BLUE, ROH
50.LA10J.003 453030300370R CABLE,DVI-D 18+1P MALE 6FT BLACK , ROHS
60.LK30J.005 50120E23AK00R HINGE COVER LEFT,LE23AK
60.LK30J.006 50120E23AK01R HINGE COVER RIGHT,LE23AK
CHASSIS
60.LKA0J.003 70106E19AC03R ASSY,CHASSIS,DUAL,W SPK ,INL,LE19AC
Page 50
BACKCOVER
BEZEL
STAND
BASE
60.LKA0J.001 71405E19AC03R ASSY,BACK COVER,DUAL,W SPK ,BLACK,IN L,LE
60.LKA0J.002 71403E19AC00R ASSY, BEZEL,BLACK,LE19AC
60.LK30J.003 71401E18AN00R ASSY,STAND,LE18AN
60.LK30J.004 71402E18AN00R ASSY,BASE,LE18AN
SPEAKER
PANEL
23.LK30J.001 618100100180R Speaker 1W 8Ω 260mm,R/B,W/CASE,ROHS
LK.1900N.020 631102093121H LCP 19"MT190AW02-VY- G1,AM1900006Y01(INN
Page 51
Acer Acer –LCD-G195W
06 Schematics and Layouts
6.1 IF BD Layout
28
Page 52
Acer Acer –LCD-G195W
6.2 KEYPAD BD Layout
29
Page 53
Acer Acer –LCD-G195W
6.2 Switching Mode Power Supply circuit
30
Page 54
5
4
3
2
1
D107
BAT750-LF/NC
DVI5V
Note 1
D D
CN101
8P 2.0mm
1
2
3
4
5
6
7
8
CON--JWT-A2008WV08P-1
VCC5V
CCFL_ON/OFF
BRIGHTNESS 6
VOLUME 6
MUTE 6
C101
100u/16V
1
2
Note 2
D101
SSM24APT/NC
DIO--SMA
R101
0
+
R0805
3
C104
0.1/16V
VCC4.5VVGA5V
Note 3
U101
AP1084K33LA
3
VIN
R173 0/NC
R0805
2
VOUT
4
PAD
ADJ
1
C102
100u/16V
U102
LD1117AL-1.8V
3
+3.3V 6
+
C105
0.1/16V
C106
0.1/16V
VIN
VOUT
PAD
ADJ
1
2
4
C103
22u/16V
+1.8VVCC5V +3.3V+3.3V
+1.8V 6
+
C107
0.1/16V
To Power/Inverter
Board
C C
Note 4
VCC5V VCC_ESD
ZD101
6V2/NC
R113
0
R0805
GND
C162 0.1/16V
C111
0.1/16V
C175 0.1/16V
GND
ZD107 6V2/NC
Note 5
+3.3V
R102
10K
CCFL_ENABLE6
R106
100K
GND GND
R103
1
10K
32
GND
R105
4K7
Q103
PMBT3904
CCFL_ON/OFF
PANEL_ENABLE6
C108
0.1/16V
R107
100K
GND
C112
1u/16V
R109
100K
R108
47K
Q101
AP2305GN
1
1
32
Q104
PMBT3904
Note 6
32
R112
51/NC
R0603
1
Q102
2N7002/NC
VLCDVCC5V
VLCD 6
32
+
C110 0.1/16V
C109 100u/16V
B B
GNDGND
Note:
1. CN101 is no locked packgae for normal model.CN101 is locked packgae for special model(Dell).
2. D101 must be co-layed with R101
3. U101 must contain TO263, TO252 and SOT223 package
4. ZD101 must be co-layed with R113. ZD101 is used for ESD back drive.Reserved C111 for EMI issue.
5. P/I Board High Enable.
Document Number : SIZE :
6. Reserved R111,R112,Q102 for panel power discharge.
A A
TITLE :
DATE :
InnoLux
COMMON
POWER (DC TO DC)
2008-1-30
SHEET OF
5
4
3
2
MSTAR_TSUMU5PEHJ
A4
63
Rev :
V01
APPRO BY :
CHECK BY :
DRAWN BY :
STONE
1
Page 55
5
4
3
2
1
1
0.1/16V/NC
Note 2
3
2
C125
RB101 0
R0603
RB102 0
R0603
RB103 0
R0603
D105
BAV99
1
VCC_ESD
GND
HSYNC 6
VSYNC 6
C116
10p/50V/NC
C117
10p/50V/NC
R131 100
R132 100
C118
10p/50V/NC
R114 75 1%
R115 75 1%
R116 75 1%
R122 75 1%
R123 75 1%
R124 75 1%
R127
R128
4K7
4K7
Note 4
R129
10K
C113 0.047u/16V
C114 0.047u/16V
C115 0.047u/16V
C119 0.047u/16V
C120 0.047u/16V
C121 0.047u/16V
VGA_DET
VCC5V
R126
0/NC
R130
1K
2
VGA5V
1
3
8
7
6
D106
BAV70
U103
AT24C02BN
VCC
WP
SCL
RED+ 6
GREEN+ 6
BLUE+ 6
SOG 6
RED- 6
GREEN- 6
BLUE- 6
VGA_DET 6
C128
0.1/16V
1
A0
2
A1
3
A2
45
GNDSDA
WP_EDID 5,6
GND
CN102
DZ11AA1-H5W6-4F
11
12
13
D D
C C
14
15
VGA_SCL
VGA_SDA
1
6
2
7
3
8
4
9
5
10
17
16
GND
ZD102 6V2
GND
VGA5V
R
G
B
C126 0.1/16V
Note 1
R120 0/NC
Note 3
2
0.1/16V/NC
FB101
120Ω
C122
R121 0
D102
3
BAV99
75 1%
75 1%
R117
R118 75 1%
R119
VGA_DET
D103
3
BAV99
1
1
C127
0.1/16V
2
C123
0.1/16V/NC
R133 1K
R134 1K
D104
3
BAV99
2
C124
0.1/16V/NC
DDC_SCL_VGA 6
DDC_SDA_VGA 6
VGA-INPUT
2008-1-30
2
MSTAR_TSUMU5PEHJ
A4COMMON
STONE
64
Rev :
V01
APPRO BY :
CHECK BY :
DRAWN BY :
1
C130 33p/50V
Note 5
C131
33p/50V/NC
C132
33p/50V/NC
InnoLux
Document Number : SIZE :
B B
ZD103 6V2
ZD104 6V2
ZD105 6V2
ZD106 6V2
GND
R135 2K2
GND
C129 33p/50V
R136 2K2
Note:
1. R120 is reserved for Samsung model.
2. R0603 package for Bead. C116,C117,C118 are reserved for EMI or performance issue.
3. C122,C123,C124,C125 are reserved for ESD or EMI issue.
4. R126 is reserved for Samsung model.
A A
5. C131,C132 are reserved for tuning performance issue.
TITLE :
DATE :
SHEET OF
5
4
3
Page 56
5
CN201
DVI-D_CON
D D
C C
RX2-
RX2+
GND
RX1-
RX1+
GND
RX0-
RX0+
GND
RXC+
RXC-
SCL
SDA
GND
HP
RX4-
RX4+
GND
RX3-
RX3+
RX5-
RX5+
VS
5V
1
2
3
9
10
19
17
18
22
23
24
6
7
8
14
15
16
4
5
11
12
13
20
21
DVI_RX2DVI_RX2+
DVI_RX1DVI_RX1+
DVI_RX0DVI_RX0+
DVI_RXC+
DVI_RXC-
DVI_SCL
DVI_SDA
DVI_DET
HPD_DVI
ZD201 6V2
DVI5V
C202 0.1/16V
2
C203
0.1/16V
2
D202
3
BAV99
D203
3
BAV99
2
1
0.1/16V
2
1
C205
D204
3
BAV99
D205
3
BAV99
4
D206
3
2
C207
0.1/16V
2
BAV99
D207
3
BAV99
1
1
1
1
2
C209
0.1/16V
2
D208
3
BAV99
D209
3
BAV99
1
1
3
R201 10
R202 10
R203 10
R204 10
R205 10
R206 10
R207 10
R208 10
D210
3
BAV99
2
C211
0.1/16V
2
VCC5V
4K7
DVI5V
Note 1
R215
0/NC
R213
10K
R214
1K
R217 10K
Q201
PMBT3904
RX2- 6
RX2+ 6
RX1- 6
RX1+ 6
RX0- 6
RX0+ 6
RXC+ 6
RXC- 6
R209 100
R210 100
1
C212 0.1/16V
ZD203 6V2
ZD204 6V2
ZD202 6V2
C213 0.1/16V
R211
4K7
DVI5V
HPD_DVI
R212
DVI_DET
HPD_DVI
DVI5V
2
1
D201
BAV70
3
U201
AT24C02BN
8
VCC
7
WP
6
SCL
WP_EDID 4,6
DDC_SCL_DVI 6
DDC_SDA_DVI 6
DVI_DET 6
Note 2
R218
100/NC
32
R219
4K7
1
C201
0.1/16V
1
1
A0
2
A1
3
A2
45
GNDSDA
GND
HPD_CTRL 6
C204
B B
GND
0.1/16V
C206
0.1/16V
C208
0.1/16V
C210
0.1/16V
VCC_ESD
InnoLux
MSTAR_TSUM5PEHJ
HDCP Function
GND
Note:
1. R215 is reserved for Samsung model.
2. R218 is reserved for some model.
A A
5
4
3
Document Number : SIZE :
TITLE :
DVI-INPUT
DATE :
SHEET OF
2008-1-30
65
2
Rev :
A4COMMON
V01
APPRO BY :
CHECK BY :
DRAWN BY :
STONE
1
Page 57
5
VDDP_33
C150
22u/16V
VDDC_18
C142
22u/16V
CN104
2x4P 2.0mm
CON--CLX-CI0108P1VDL-1
To Keypad
Board
Note 2
+
GND
+
GND
PMBT3906/NC
LED_B
LED_A
LED_G
1
2
3
4
5
6
7
8
Note 1
Q106
R163
330/NC
R0603
Q107
PMBT3906
R165
330
R0603
Q108
PMBT3906
R168
330
R0603
Note 3
GND
C154 0.1/16V
C159 0.1/16V
C134 0.1/16V
C135 0.1/16V
C133 0.1/16V
C143
0.1/16V
VCC5V
VCC5V
VCC5V
C155 0.1/16V
C156 0.1/16V
C144
0.1/16V
2
1
R162
3
10K/NC
R164
0R0603
2
1
R166
3
10K
R167
2
1
R169
3
10K
R170
100/NC
R0603
C167 0.1/16V
C168 0.1/16V
EP101 5P35V/NC
C136 0.1/16V
C145
0.1/16V
C137 0.1/16V
C146
C147
0.1/16V
0.1/16V
R161
10K
LED_B_C
R177
10K
LED_A_C
R176
10K
LED_G_C
C170 0.1/16V
C169 0.1/16V
R193 0/NC
C171 0.1/16V
EP103 5P35V/NC
C160 0.1/16V
100/NCR0603
EP102 5P35V/NC
C138 0.1/16V
C172 0.1/16V
C149 0.1/16V
C139 0.1/16V
PLUS-MINUS
R194 0/NC
C173 0.1/16V
C141 0.1/16V
C161 0.1/16V
+3.3V
FB102
60Ω
D D
C C
B B
+1.8V
FB105
60Ω
Note4
4
AVDD_33
AVDD_18
R189
10K/NC
WP_FW
R192
10K
VCC4.5V
3
Define for X203H
MENU
RIGHT/LEFT
AUTO
E-color
LED_A
LED_G
POWER
DDC_SDA_VGA4
DDC_SCL_VGA4
DDC_SDA_DVI5
DDC_SCL_DVI5
R190
10K
VCC4.5V
C164 1u/16V
SCL_OSD
SDA_OSD
3
AVDD_33
VDDC_18
AVDD_18
8
104
14
53
74
126
20
21
VDDC
VDDC
VDDC
GND
GND
172952
AVDD_33
AVDD_33
AVDD_33
GND
GND
GND
GND
7288101
+3.3V
1
2
3
45
GND
VDDC
AVDD_18
GPIO_P22/PWM1/GPIO_P23/PWM1
GPIO_P24/PWM2/GPIO_P27/PWM2
GPIO_P13/PWM2/GPIO_P26/PWM2
TSUMU58EHJ-LF-1
GND
GND
GND
GND
106
105
686963
LVA4M/GPO[6]
LVA4P/GPO[7]
GND
GND
GND
GND
76
75
113565557616470
62
C152 0.047u/16V
390 1%
C148
1u/16V
SDO
2
SO
SCZ
1
CS#
SCK
6
SCK
SDI
R147 0
R148 0
C153 0.1/16V
R180 10K
U106
8
7
6
AT24C16AN
28
27
25
24
26
23
22
32
33
34
35
9
10
12
13
15
16
18
19
5
6
7
31
30
41
42
43
44
108
128
127
102
VCC
WP
SCL
RIN0P
RIN0M
GIN0P
GIN0M
SOGIN0
BIN0P
BIN0M
HSYNC0
VSYNC0
DDCA_SDA/RS232_TX
DDCA_SCL/RS232_RX
RX2P
RX2N
RX1P
RX1N
RX0P
RX0N
RXCKP
RXCKN
DDCD_SDA
DDCD_SCL
REXT
REFP
REFM
SDO
CSZ
SCK
SDI
RST
XIN
XOUT
BYPASS
MODE
GND
1
11
GND
C140
0.1/16V
A0
A1
A2
GNDSDA
RED+4
RED-4
GREEN+4
GREEN-4
R159 470
SOG4
BLUE+4
BLUE-4
HSYNC4
VSYNC4
RX2+5
RX2-5
RX1+5
RX1-5
Rx0+5
RX0-5
RXC+5
RXC-5
AVDD_33
R144
+3.3V
C165
0.1/16V
GND
U108
8
VCC
7
HOLD#
3
WP#
4 5
R175 100K
R138
4K7
GND SI
PM25LV010A-100SCE
C157 22p/50V
X101
14.31818MHz
C158 22p/50V
VDDP_33
R137
4K7
WP_OSD
R142 100
R143 100
R149 10K/NC
R191
1K
GND
KEY1
ADC_KEY1
ADC_KEY2
LED_B
LED_A
LED_G
KEY2
VDDP_33
8737103
112
107
40
59
114
606566
54
58
VDDP
VDDP
GPIO_P00/SAR0/GPIO_P17/SAR0
GPIO_P01/SAR1/GPIO_P00/SAR1
GPIO_P02/SAR2/GPIO_P01/SAR2
GPIO_P03/SAR3/GPIO_P02/SAR3
LVB4M/NC
LVB4P/NC
90
89
71
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
GPIO_P06
GPIO_P07
GPIO_P14/PWM0
GPIO_P15
GPIO_P16
GPIO_P44/GPIO_P41
GPIO42/GPIO_P24
GPIO_P04/GPIO_P03/PWM3
GPIO_P25/GPIO_P12/PWM3
I2C_MCL/GPIO_P10
I2C_MDA/GPIO_P11
GPIO_P43/GPIO_P42
GPIO_P45/GPIO_P04
GPIO_P46/GPIO_P05
GPIO_P47/GPIO_P22
LVBCKM
LVBCKP
LVACKM
LVACKP
NC/GPIO_P25
NC/GPIO_P43
NC/GPO[2]
NC/GPO[4]
NC/GPO[0]NCNCNCNC
115
111
110
67
VDDP
LVB0M
LVB0P
LVB1M
LVB1P
LVB2M
LVB2P
LVB3M
LVB3P
LVA0M
LVA0P
LVA1M
LVA1P
LVA2M
LVA2P
LVA3M
LVA3P
116
VCTRL
117
VCC5V_DET
119
R154 1K
120
R155 1K
121
122
123
124
2
3
R125 1K
4
R160 1K
36
48
R153 1K
50
51
73
109
125
39
38
R216 1K
49
47
46
45
RXO0-
100
RXO0+
99
RXO1-
98
RXO1+
97
RXO2-
96
RXO2+
95
RXOC-
94
RXOC+
93
RXO3-
92
RXO3+
91
RXE0-
86
RXE0+
85
RXE1-
84
RXE1+
83
RXE2-
82
RXE2+
81
RXEC-
80
RXEC+
79
RXE3-
78
RXE3+
77
NC
NCNCNC
118
VLCD
FOR SINGLE LVDS INPUT
RXO0RXO0+
RXO1RXO1+
RXO2RXO2+
RXOCRXOC+
RXO3RXO3+
2
+3.3V
R172 10K
R139 10K/NC
R151
R184 10K
R152 10K
R174 10K
R150 10K
R171 10K
CN105
FFC-CON/NC
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CON--PI-AL230C
GND
VCC5V
C166 0.1/16V/NC
R220 10K
R140 10K
R181 10K/NC
R179 10K
R182 20K/NC
R157 100
R158 100
WP_FW
R188
4K7
SCL_OSD
SDA_OSD
Note5
GND
GND
WP_OSD
RL111 0/NC
RL112 0/NC
RL113 0/NC
RL114 0/NC
VLCD3
VLCD3
RXO0RXO0+
RXO1RXO1+
RXO2RXO2+
RXOCRXOC+
RXO3RXO3+
RXE0RXE0+
RXE1RXE1+
RXE2RXE2+
RXECRXEC+
RXE3RXE3+
R0603
RXO0RXO0+
RXO1RXO1+
RXO2RXO2+
RXOCRXOC+
RXO3RXO3+
RXE0RXE0+
RXE1RXE1+
RXE2RXE2+
RXECRXEC+
RXE3RXE3+
LPIN6
LPIN5
LPIN6
LPIN5
CON--HR-200PHD2X15ST
R146 1K
GND
ADC_KEY1
ADC_KEY2
LED_B_C
LED_A_C
LED_G_C
VOLUME 3
MUTE 3
KEY2
VGA_DET 4
HPD_CTRL 5
KEY1
PANEL_ENABLE 3
CCFL_ENABLE 3
BRIGHTNESS 3
DVI_DET 5
WP_EDID 4,5
Note6
CN103
FFC-CON
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CON--PI-AL230C
CN107
FFC-CON/NC
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1
A A
Note:
1. Each bypass capacitor (0.1u/16V) must be respectively closed to pin that is DC power input of scaler IC.
2. LED blue dr iving circuit is reserved for BenQ model.
3. Bypass capacitor C167,C168,C169,C170,C171,C172,C173 are for ESD and EMI issue. ESD component
EP101,EP102,EP103 are for GPIO direct driving LED. Reserved R193&R194 for Dell 18.5W
4. CN104 is no locked packgae for normal model.CN104 is locked packgae for special model(Dell).
5. RL111,RL112,RL113,RL114 are reserved for some panel spec.
6. CN103 is no locked packgae for normal model.CN103 is locked packgae for special model(Dell).
5
InnoLux
Document Number : SIZE :
TITLE :
DATE :
4
3
2
SHEET OF
SCALER
2008-1-30
MSTAR_TSUM5PEHJ
CustomCOMMON
Rev :
66
V01
1
APPRO BY :
CHECK BY :
DRAWN BY :
Page 58
Assembly and Disassembly
S1: Disassemble the hinge cover.
S2:
Use a screwdriver to unscrew the 4
screws to release the stand.
2
1
3
4
s2
S4:put the dissemble monitor on the desk
s4
Page 59
S5: Turn over the LCD monitor( screen facing up)
S7: Turn over the LCD monitor( screen facing down),
then dissemble the back from the front bezel.
s5
S6: Wedge your finger between the front bezel and the panel,
And then pry the front bezel to disengage the locking mechanism.
s6
s7
s7
Page 60
S8: Release the cable between
the keypad and the main board.
S10: Release the LVDS cable from the panel
and the main board. Release the aluminum foil
on the LVDS.
s8
S9: Release the CCFL cable from the panel and
the power board.
s9
s10
S11: Release the aluminum foil from the panel.
s11
Page 61
S12: Dissemble the chassis from the front bezel.
NOTE: disengage the locking mechanism.
locking
mechanism
s12
S13、Dissemble the panel from the
front bezel.
s13
s12
s13
Page 62
S14、Release the keypad from the
front bezel.
s15、Release the cable。
s14
s14
s15
s16、 Use a screwdriver to unscrew the
screws to release the main board and power board.
5
1
2
4
3
6
s16
Page 63
s17、 Use a screwdriver to unscrew the
screws to release the main board.
s17
s18、 release the speaker cable from the power board.
s19、 release the power board and main board from
the chassis.
s18
s19
Loading...