Acer n50 Quick Guide

Acer n50 Quick Guide

Just for starters

NOTICE: For initial use, you need to charge your handheld for 4 hours.

CAUTION:
Before you set up and operate your device, read and follow the First things first
in the User’s Manual.

1) SD/MMC expansion slot with SDIO feature.

2) IrDA.

3) Stylus.

4) CF Type II expansion slot.

5) Earphone jack.

6) Status LEDs.

7) Auxiliary speaker.

8) Today button

9) Calendar button

10) 5-way directional pad.

11) Contacts button

12) Messaging button

13) 26-pin connector.

14) Battery latch.

15) Removable battery.

16) Hold switch

17) Power button.

18) Soft reset.

19) 3.5” TFT LCD.

20) Main speaker.

21) Built-in microphone.

Charge the Battery First

1. Install the battery.

2. Connect the AC adapter and charge the device for at least 4 hours.

3. After the battery is charged, press the power button on the left side. Follow the
onscreen instructions to set up your handheld.

Install Microsoft® ActiveSync®