Acer G205H Schematic
Acer Acer –LCD-G205H
Service Manual
LCD Monitor Acer G205H
1
Table of Contents
Important Safety Notice .........................................................................................02
01 Product Specification ..........................................................................................03
02 Flat Panel Specification .......................................................................................15
03 Exploded Diagram ..............................................................................................36
04 Troubleshooting....................................................................................................37
05 Spare Parts List ...................................................................................................42
06 Schematics and Layouts.......................................................................................43
07 Assembly and Disassembly ................................................................................46
Appendix : User’s manual
Copyright
Copyright 2006 InnoLux Tech. Corp. Ltd
All Rights Reserved
This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any
electronic or machine readable form without prior written permission of InnoLux Tech. Corp. Ltd.
Acer G205H Service Manual
1
Acer Acer –LCD-G205H
Important Safety Notice
1. Safety precautions
This monitor is manufactured and tested on a ground principle that a user’s safety comes first.
However, improper used or installation may cause damage to the monitor as well as to the user.
Warning:
z This monitor should be operated only at the correct power sources indicated on the label on the
rear of the monitor. If you’re unsure of the power supply in you residence, consult your local dealer
or Power Company.
z Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor
should only be repaired by a qualified technician.
z Do not remove the monitor cabinet. There are high-voltage parts inside that may cause electric
shock to human bodies.
z Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
z Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable
immediately and consult your closed dealer.
z Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the class screen.
z Do not place heavy objects on the monitor or power cord.
2. Product safety notice
Many electrical and mechanical parts in this chassis have special safety visual inspections and the
protection afforded by them cannot necessarily be obtained by using replacement components rated
for higher voltage, wattage, etc. Before replacing any of these components read the parts list in this
manual carefully. The use of substitute replacement parts, which do not have the same safety
characteristics as specified in the parts list, may create shock, fire, or other hazards.
3. Service notes
z When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
z Keep wires away from high voltage, high temperature components and sharp edges.
z Keep wires in their original position so as to reduce interference.
z Adjustment of this product please refers to the user’ manual.
Acer Acer –LCD-G205H
W
01 Product Specification
1. General:
G205H series LCD monitor is designed with a wide screen 20.0” WXGA+ TFT LCD panel, LVDS interface, analog RGB
signal input and DVI-D signal input.It featured with embedded universal AC power supply. This monitor can support
maximum resolution up to 1600 x 900@60Hz. It support HDCP and color management function.
1.1 Main Features
Maximum resolution : 1600 x 900 @ 60Hz
Back light system : 4 CCFL (top & bottom edge side)
Pixel pitch : 0.2768 (H) x 0.2768 (V)
Display area : 442.8(H)x249.2(V) 20.0 inch diagonal
Brightness : ≥250cd/m²
Contrast ratio :1000
ACM (option) :50000:1
Response time (Tr+Tf) : 5ms (typ.) (2)
GTG (Option) : 2ms
Viewing angle : 160°(H)/ 160°(V), typ (3)
Input interface : Analog (D-sub 15 pin)
Digital Option(DVI-D 24 pin)
Power management : Compatible with VESA DPMS
Plug & Play : VESA DDCCI
OSD language
Non EU version : English, French, German, Italian, Spanish, Chinese S. Chinese T. Japanese
EMEA version : English, French, German, Italian, Spanish, Dutch, Finnish, Russian
Russian version : Russian
Universal AC power supply
Note (1)(2)(3): This item spec depend on the LCD panel.
׃1 (typ.) (1)
1.2 Accessories
Items
Descriptio
n
AC Power Cord : 1.8 m. (Black. Cord type depend on sale region)
VGA cable : 1.8 m. (15 pin D-SUB, black cable with blue male connector)
Quick-start Guide : User manual English (640Mb CD)
Audio cable : 1.8m. (Green/Blue header)
DVI cable : 1.8 m. (18+1 pin, black cable with white connector)
Audio Cable(option) : 1.8 m (Audio Line Cable Green/Blue header)
Power cable
(option)
1.8m 1.8m 1.8m 1.8m 1.8m Multi Multi Multi
● ● ● ●
2. Operation Specifications
The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality during
exposure to the operating conditions and after exposure to the non-operating conditions, in any sequence.
2.1 Environmental conditions
2.1.1 Operating:
VGA
cable
DVI
Cable
Audio
cable
DMI cable
arranty
ard
● ●
Quick-start
Guide
Camera CD
izard
Temperature range :0°C to 40°C
Relative humidity : 20% to 90%
Acer Acer –LCD-G205H
2.1.2 Storage
Temperature range : -20°C to 60°C
Humidity range : 10% to 90%
2.1.3 Altitude
Note 1: Temperature and relative humidity range must be in the area shown as the following figure due to
panel limited
Note 2: Altitude spec must not over panel spec.
note 1
:
note 2
Operating 10000 ft (Ta=50, t=24h)
Storage 40000 ft (Ta=30, t=24h )
Figure 1 Absolute Ratings of Environment
2.2 Safety, EMC, Ergonomics and Compatibility Requirements
Safety & EMC
Ergonomics
Compatibility
Power Management
UL/ cUL, CE, CB, CCC, Nemko/Ergo, C-Tick (N214), VCCI,
FCC, CCC, BSMI,
Nemko/Ergo,MPR II,ISO13460-2，TCO99，TCO03
Windows 98/Me/2000, Windows XP, Window Vista
Energy Star V4
2.3 Electrostatic Discharge Requirements
The subject unit must withstand ±8KV for contact discharge and ±15KV for air discharge of Electrostatic Discharge
and meet the standard of IEC61000-4-2(EN55024). (without discharge on VGA/DVI/HDMI pin)
Item Condition Spec Remark
Contact discharge : +/-4KV
Electrostatic
Discharge
Acer SPEC
Contact discharge : +/-8KV
Air discharge : +/-8KV
Air discharge : +/-15KV
150pF/330ohm.
●
●
Each point 10
times.
1 time/Sec.
2.4 Reliability
The MTBF of this product shall be greater than 50,000 hours excluding the LCD panel. The LCD panel life which is
defined as the time period for the maximum luminance to reduce to 50% of the initial value is 40,000 hours minimum at
the condition of displaying an all WHITE field at mid Brightness and Contrast settings.
3. Electrical and Optical Characteristics and Performance
Acer Acer –LCD-G205H
3.1 Main Power Supply
3.1.1
Input characteristics
Items Condition Spec Note
AC Input Voltage range Universal input full range 90~264Vac
AC Input Voltage rating Universal input full range 100~240Vac
AC input frequency range 90~264Vac 47~63Hz
AC input frequency rating 100~240Vac 50~60Hz
100Vac 1.5A(max) AC Input Current
240Vac 0.8A(max)
Inrush Current
AC-DC power Efficiency
Note2. Before each test, the buck capacitor needs to be discharged.
Before each test, it must be 10 minutes at least after the latest test.
Hot star not component be damaged.
3.1.2
Output characteristics
115Vac,cold star,25°C 35A (max)
230Vac,cold star,25°C 70A(max)
DC output full loading ≥80%
Items Condition Spec Note
Ripple and Noise
+24V output <1500mv
+5V output <200mv
See Note2
With system See note 3
audio 5V output <300mv
+24V output
+5V output <100mv
audio 5V output
24v loading:0.2A~1.2A
DC Output Voltage
5vloading:0.04A~1.5A
DC output loading
capability
Rise Time <50mS
Hold-up time AC input: 100V~240V >10mS
Note3: Paralleled a 0.1uF ceramic Cap. And 47uF aluminum Cap. Between the end of DC loading side, Measured
band-width=20MHz. Ripple voltage of +25V is less than 1500mV when enter into burst mode.
3.1.3
Protection characteristics
5v loading:0. 7A~1.5A
audio 5v loading:0A~1.0A
24V loading: 0A
audio 5v loading:0A
Vcc5V/1.5A
<480mv
<100mv
Vcc24V:23V~28V
Vcc5V:4.85V~5.35V
audio 5v:4.5V~5.5V
Vcc24V: 23V~30V
Vcc5V: 4.85V~5.35V
audio 5v:4.5V~5.5V
Vcc24V/1.2A
audio 5V/1.0A
For system active
With dummy Load
For system active
For power saving or DC off
Protection Condition Spec
OPP nominal AC input 55W ( min )
SCP(short circuit protection) Before fuse with auto-recovery function
OVP(Over voltage protection) Auto recovery <output capacitor voltage
Table-1
Acer Acer –LCD-G205H
)
Status H-sync V-sync Video Power LED
Power On on on active ≤ 48W Blue
off on blanked < 1W Yellow
Power Saving
Power Off -- -- -- < 1W Off
3.1.4 Backlight Power Supply
Items Specification
on off blanked < 1W Yellow
off off blanked < 1W Yellow
Panel
Lamp 4 CCFL 4 CCFL 4 CCFL
Input Voltage DC 23~28 V DC 23~28 V DC 23~28 V
Input current 1.1A (Typ.), 1.2A (Max.) 1.1A (Typ.), 1.2DA (Max.) 1.1A (Typ.), 1.2A (Max.)
On/Off switch level
Brightness PWM Duty
(ACM Off)
Brightness PWM Duty
(ACM On)
CCFL operating
Voltage
CCFL Current
SEC LTM200KT01 panel
(glare/non glare)
5.5V≧Von≧ 2.0 V (on)
-0.3v ≤ Voff ≤ 0.8 V (off)
30%~100%
10%~100%
840Vrms (Typ.), 830 Vrms (Typ.), 830 Vrms (Typ.),
3.0 mA (min.) 3 mA (min.) 3 mA (min.)
6.5mA (Typ.) 6.5 mA (Typ.) 6.5 mA (Typ.)
8.0 mA (Max.) 8 mA (Max.) 8 mA (Max.)
CMO M200O1-L05(NC) LG LM200WD1(NC)
5.5V Von≧ ≧ 2.0 V (on)
-0.3v ≤ Voff ≤ 0.8 V (off)
30%~100% 30%~100%
10%~100% 10%~100%
5.5V Von ≧≧2.0 V (on)
-0.3v ≤ Voff ≤ 0.8 V (off)
CCFL startup voltage
Operating frequency 40~60KHz 40~80KHz 40~80KHz
Protect delay time > 1 second > 1 second > 1 second
Efficiency ≥70% (Using dummy load) ≥70% (Using dummy load)
Note: Other panels please refer to the reference panel specs.
≧1700 Vrms (0˚C)
1≧ 480 Vrms (0˚C) 1≧ 480 Vrms (0˚C)
3.2 Brightness output
The test to verify specifications in this section shall be performed under the following standard conditions unless otherwise
noted.
Temperature : 25 ± 5°C
Test pattern : white
Video Resolution : 1600 x 900
Video input level : 700 mV ± 2%
Warm-up time : 30 minutes
Set brightness control and also contrast control at maximum, to measure the screen center, the light output shall ≥ 240
2
cd/m
(as panel spec)
3.3 White balance
The test standard conditions refer to Sec 3.3.(Brightness control is at 100 contrast control is at 50 )
≥70% (Using dummy
load
Acer Acer –LCD-G205H
Mode
Cool
Warm
User
9300K 0.283 ± 0.030 0.297 ± 0.030
6500K 0.313 ± 0.030 0.329 ± 0.030
Panel While x Panel While y
3.4 Brightness uniformity
The test standard conditions refer to Sec 3.4.
Chromaticity Coordinate
x y
(4)
Note (4): 25% is for Samsung panel LTM200KT01 (first source).The second source spec follow Sec 5.1.
3.5 Audio Signal(option)
Items Specification
Input impedance
Frequency response range
Signal to noise ratio
Output power
Loading impedance
≧ 10K ohm
200Hz –20kHz
≧ 40 dB
≦1.0W + 1.0 W(±20% tolerance), THD 10%.
8 ohm
4. Input / Output Signal Specifications
4.1 Video signals
Analog
Sync: TTL level (Input impedance ≧ 1k Ohm)
Digital : TMDS Signal: (min) ±200mVpp@24Bit
4.2 Signal Timing
RGB signal: 0.7Vp-p (Input impedance = 75 Ohm)
Positive and negative sync of Separate Horizontal/Vertical Sync
Through D-SUB/DVI/HDMI connectors, this unit can support FH= 31~84 KHz, Fv=56~75Hz, with maximum pixel clock
160MHz input signal and WXGA+ output. Modes details as below:
Acer Acer –LCD-G205H
VESA MODES
Horizontal Vertical
Nominal
Mode Resolution Total Nominal
Frequency
+/-0.5KHz
640*480@60Hz 800*525 31.469 N 59.941 N 25.175
VGA
SVGA
XGA
VESA
SXGA
MAX
WXGA 1280*800@60Hz 1680*831 49.702 N 59.810 P 83.500
WXGA 1600x900@60Hz 2122x934 55.99 N 59.946 P 118.250
WXGA
640*480@72Hz 832*520 37.861 N 72.809 N 31.500
640*480@75Hz 840*500 37.500 N 75.000 N 31.500
800*600@56Hz 1024*625 35.156 P 56.250 P 36.000
800*600@60Hz 1056*628 37.879 P 60.317 P 40.000
800*600@72Hz 1040*666 48.077 P 72.188 P 50.000
800*600@75Hz 1056*625 46.875 P 75.000 P 49.500
1024*768@60Hz 1344*806 48.363 N 60.004 N 65.000
1024*768@70Hz 1328*806 56.476 N 70.069 N 75.000
1024*768@75Hz 1312*800 60.023 P 75.029 P 78.750
1152*864@75Hz 1600*900 67.500 P 75.000 P 108.000
720x400@70Hz 900*449 31.469 N 70.087 P 28.322
1280*720@60Hz 1650x750 44.955 N 59.940 P 74.176
1280*960@60Hz 1800x1000 60.000 P 60.000 P 108.000
1280*1024@60Hz 1688*1066 63.981 P 60.020 P 108.000
1280*1024@75Hz 1688*1066 79.976 P 75.025 P 135.000
640*480@66.7Hz 864*525 35.000 P 66.667 P 30.240
1152*870@75Hz 1568*909 68.775 N 75.00 N 84.520
832*624@75Hz 1152*667 49.725 N 74.550 N 57.283
1600*900@75Hz 1936*942 70.546 N 74.889 P 151.25
Sync
Polarity
Nominal
Frequency
+/-1Hz
Sync
Polarity
Pixel Clock
(MHz)
4.3 Timing requirements
The LCD monitor must be capable of displaying standard resolutions within the vertical frequency range of 56 ~ 75 Hz
and the horizontal scan range of 31~84 KHz with maximum pixel clock of 160MHz.
Vertical / Horizontal Sync polarity: positive or negative.
If input signal is out of range of horizontal 31~84 KHz or vertical 56-75Hz, or pixel clock large than 160MHz, message
“Input Not Supported” is shown on screen.
4.4 DDC date
G205H Analog
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 FF FF FF FF FF FF 00 04 72 D1 00 00 00 00 00
0
00 00 01 03 08 2C 19 78 EA DE 95 A3 54 4C 99 26
1
0F 50 54 BF EF 90 81 00 71 4F 81 80 81 C0 81 40
2
A9 C0 01 01 01 01 31 2E 40 00 62 84 22 30 58 A8
3
35 00 BB F9 10 00 00 1F 00 00 00 FD 00 38 4B 1F
4
54 10 00 0A 20 20 20 20 20 20 00 00 00 FF 00 30
5
30 30 30 30 30 30 30 30 30 30 30 0A 00 00 00 FC
6
Acer Acer –LCD-G205H
00 47 32 30 35 48 0A 20 20 20 20 20 20 20 00 E4
7
G205H DVI
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 FF FF FF FF FF FF 00 04 72 D1 00 00 00 00 00
0
00 00 01 03 80 2C 19 78 EA DE 95 A3 54 4C 99 26
1
0F 50 54 BF EF 90 81 00 71 4F 81 80 81 C0 81 40
2
A9 C0 01 01 01 01 31 2E 40 00 62 84 22 30 58 A8
3
35 00 BB F9 10 00 00 1F 00 00 00 FD 00 38 4B 1F
4
54 10 00 0A 20 20 20 20 20 20 00 00 00 FF 00 30
5
30 30 30 30 30 30 30 30 30 30 30 0A 00 00 00 FC
6
00 47 32 30 35 48 0A 20 20 20 20 20 20 20 00 6C
7
G205H HDMI(N/A)
5. LCD Characteristic & Performance
All the tests to verify specifications in this section shall be performed under the following standard conditions unless
otherwise noted. The standard conditions are:
Temperature : 25 ± 5°C
Warm-up time : 30 minutes minimum
Checking display modes : All the specified modes
5.1 Panel general specifications
5.1.1 General specifications
Supplier: SAMSUNG CMO(NC) LG(NC)
Model name LTM200KT01(glare/non glare) M200O1-L05 LM200WD1
Display Area 442.8(W)x249.2(H) mm 442.8(W)x249.075(H) mm
Pixel Pitch 0.2768 x 0.2768mm 0.2768 x 0.2768mm 0.2766 x 0.2766mm
Display Colors: 16.7 Million (6bit+Hi-FRC) 16.7 Million (6bit+Hi-FRC)
Number of Pixel 1600x900 pixels 1600x900 pixels 1600x900 pixels
442.8(W)x249.1(H)
mm
16.7 Million
(6bit+Hi-FRC)
Pixel Arrangement RGB vertical stripe RGB vertical stripe RGB vertical stripe
Brightness 300cd/m2 (Typ.) 250cd/m2 (Min.)
Contrast Ratio 1000:1 (Typ.), 700:1(Min) 1000:1 (Typ.), 700:1(Min)
Viewing Angle Hor:160°, Ver: 160°(Min, CR>10) Hor:170°, Ver: 160°(Min, CR>10)
Brightness Uniformity
Display Mode Normally White Normally White Normally White
Response Time(Tr+Tf) 5ms (Typ.), 10ms (Max.) 5ms (Typ.), 10ms (Max.)
Surface Treatment Anti-glare, Hard coating (3H) Anti-glare, Hard coating (3H)
Lamp 4 CCFL 4 CCFL 4 CCFL
Min/Max≧25%
300cd/m2 (Typ.) 250cd/m2
(Min.)
<1.4 (Note) <1.7 (Note)
300cd/m2 (Typ.)
250cd/m2 (Min.)
1000:1 (Typ.),
700:1(Min)
Hor:130°, Ver:
140°(Min, CR>10)
5ms (Typ.), 10ms
(Max.)
Anti-glare, Hard
coating (3H)
Acer Acer –LCD-G205H
Note : Detial Spec PLS follow panel Spec
5.1.2 LCD module defects
LCD module defects check follows IIS.
6. Function Specifications
6.1 Keypad Function
6.1.1 Control buttons
A. When OSD un-displays, press [AUTO] and the function menu will show on the screen;
[AUTO]
[MENU]
[◄]
B. When function menu displays, press [AUTO] to perform auto-adjustment;
C. When OSD displays, press [AUTO] to return to previous level menu;
D. When “e Color OSD” OSD displays, press [AUTO] to exit the OSD.
A. When OSD isn’t shown on screen, press [MENU] to enter the function menu;
B. When function menu displays, press[MENU]to enter the main menu OSD;
C. When OSD displays, press [MENU] to perform function of menu icon that is highlight or
enter next level menu
A. When OSD isn’t show on screen, press [◄] to enter the function menu;
B. When “MENU OSD” displays, press these keys to change the contents of an
adjustment item, or change an adjustment value;
C. When Function menu displays, press [◄] to show “Audio” OSD and decrease the
volume.
A. When OSD isn’t show on screen, press [►]to enter the function menu;
B. When “MENU OSD” displays, press these keys to change the contents of an
adjustment item, or change an adjustment value;
C. When Function menu displays:
[►]
[e Color ]
[POWER] Power on or power off the monitor
6.1.2Hot Key Operation
FUNCTION
a. Press [►] key one time to search (a port with signal in order)
b. Show “source icon” at the same time, as searching that port
c. Go into next port automatically, if search the port without signal
d. Display it, if search the port with signal
D. When the volume menu displays, press [►] to increase the volume.
A. When function menu displays, press [e Color] to show “e Color OSD”, and press
again the OSD can not disappear, but the time of “e Color OSD ”disappearing is reset
to 10 seconds again.
B. When OSD disappear not including “e Color OSD”, press [e Color] to show “e Color
OSD” OSD, the OSD before disappears, but the parameters of it should be saved
HOT KEY OPERATION
DESCRIPTION
e Color AUTO MENU
◄ ►
POWER
FACTORY
MODE
●
ON
Press [e], and then press [POWER] for DC
power on. OSD menu will be shown with “F” on
the left top. Select “F” for entering factory mode.
6.2 OSD S
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote control
unit. The unit shall leave the factory with all OSD controls set to their default values.
First Second Third Fourth
tructure
Control
Range
Default Value
Acer Acer –LCD-G205H
Function
Menu
Picture
e-color
Auto --- --- --- ---
Main menu Main menu (Pictiure) --- --- ---
Audio Audio menu --- --- ---
Input --- --- --- ---
Acer eColor Management
Brightness --- ---
Contrast --- ---
H.Position
empowering
technology
empowering
technology
--- --- ---
--- --- Standard
User mode
Text mode 44
0～100
0～100
0～100
Standard mode 77
Graphics mode
Movie mode
User mode
Text mode
Standard mode
Graphics mode
Movie mode
50
77
97
77
50
50
50
60
56
V.Position
Focus
Clock
Colour Temp
Auto Config --- --- --- ---
OSD OSD Timeout --- ---
Volume ----- -----
Setting
Wide Mode
DDC/CI --- --- --- ON
ACM --- --- --- OFF
--- ---
Warm --- --- Default
Cool --- --- ---
Red
User
Full --- --- Default
Aspect --- --- ---
Green
Blue
0～100
0～100
0～100
0～100
0～100
0～100
10～120
0～100
50
---
50 ○1
80
80
80
10
50
Input
Language
VGA
DVI
EMEA NO-EMEA
English English --- ---
--- --- ---
--- --- ---
--- ---
English
Acer Acer –LCD-G205H
A
A
A
A
A
A
A
A
Russian
Deutsch Deutsch --- ---
Français Français --- ---
Español Español --- ---
Italiano Italiano --- ---
繁體中文
--- ---
Dutch
Finnish
Reset --- --- --- ---
Resolution --- --- --- ---
H.Freq --- --- --- ---
Info
Notes; ○1 Clock default 50 is for Visa timing. Others depend on timing.
6.3 OSD Translation
(
NO_EMEA
1.English
Picture
cer eColor
Management
Brightness
Contrast
H.Position
V.Position
Colour Temp
V.Freq --- --- --- ---
Input Type --- --- --- ---
S/N --- --- --- ---
)
(英语)
Focus
Clock
Warm
Cool
User
Red
2.繁體中文
畫面
cer eColor
Management
亮度
對比
水平位置
垂直位置
相位
時脈
色溫
暖色溫
冷色溫
使用者設定
紅色
3.Deutsch
(德语)
cer eColor
Management
Helligkeit Luminosité Brillo Luminosità
Kontrast Contraste Contraste Contrasto
H.Position H.Position H.Posicion O.Posizione
V.Position V.Position V.Posicion V.Posizione
Fokus Netteté Nitidez Nitidezza
Takt Fréquence Reloj Orologio
Farbtemp.
Warm Chaud Càlido Caldo
Anwender Utilisateur Usuario Utente
4.Français
(法语)
Bild Image Imagen Immagine
cer eColor
Management
Temp.
Couleur
Kalt Clair Frio Freddo
Rot Rouge Rojo Rossa
简体中文
日本語
--- ---
--- ---
5.Español
(西班牙语)
cer eColor
Management
Management
Temp. Color Temp. Colore
6.Italiano
(意大利语)
cer eColor
7.简体中文 8.日本語
画面 ピクチャー
cer eColor
Management
cer eColor
Management
亮度
对比度
コントラス
水平位置 水平位置
垂直位置 垂直位置
相位 フェーズ
时序 クロック
色温
色溫度
暖色温 暖色
冷色温 寒色
使用者设定
ユーザー設
红色 赤
輝度
ト
定
Green
Blue
Auto Config
綠色
藍色
自動調整
Grün Vert Verde Verde
Blau Bleu Azul Blu
Autom. Abgl. Autoréglage Autoajuste Autoregolazione
OSD OSD
OSD 顯示時
OSD
Timeout
Setting
間設定
設定
OSD-Dauer
Einstellung Réglages Configuración Impostazione
Délai de
l'OSD
T. de espera
OSD
Intervallo OSD
绿色 緑
蓝色 青
自动调整 自動調整
OSD 显示时
OSD 表示時
间设定
设置 設定
間設定
Acer Acer –LCD-G205H
Wide Mode
Full
寬螢幕模式
全螢幕
Vollbild Plein écran Completa Schermo intero
Vollbild Plein écran Completa Pieno
宽屏模式
全屏 全画面
Aspect Aspect
Input
Language
輸入
語言
Eingang Entrée Entrada Input
Sprache Langue Idioma Lingua
输入 入力
语言
ワイドモー
ド
言語
Reset
Please Wait
Information
Move
OFF
Message menu: (NON_EMEA)
English
(英语)
Auto Config
Please Wait
Cable Not
Connected
恢復出廠模
Exit
ON
繁體中文
自動調整
請稍待
無訊號線
連接
式
請稍待
資訊
結束調整
移動
開 EIN Allumé ACTIVADO ATTIVA 开启 オン
關 Aus OffEteinte Apagado Spento 关闭 オフ
Deutsch
Autom. Abgl.
Bitte warten
Leitung nicht
angeschlossen
Rücksetzen Restaurer Reiniciar Resetare
Bitte warten
Veuillez
patienter
Espere, por
favor
Attendere prego
Information Informations Información Informazioni
Beenden Quitter Salida Uscita
Beweg. Dépla. Mover Muovi
(德语)
Français
(法语)
Autoréglage
Veuillez
patienter
Câble non
connecté
Español
(西班牙语)
Autoajuste
Espere, por
favor
Cable no
conectado
Italiano
(意大利语)
Autoregolazione
Attendere prego
Cavo non
connesso
恢复出厂模
式
请稍待
信息
リセット
お待ちくだ
さい
情報
退出菜单 終了
移动 移動
简体中文 日本語
自动调整
请稍待
信号线
无连接
自動調整
お待ちください
ケーブルが接続さ
れて
いません
Input Not
Supported
No Signal
不支援
輸入訊號
無訊號
Color management OSD
English
(英语)
Standard
Text
Graphics
Movie
User
Adjust/Exit
Select
繁體中文
標準
文字
圖形
電影
使用者
Adjust/Exit Adjust/Exit Adjust/Exit Adjust/Exit Adjust/Exit Adjust/Exit Adjust/Exit
選擇
(EMEA)
Frequenzen
nicht
unterstützt
Kein signal Pas de signal Sin señal
(scenario OSD)
Deutsch
(德语)
Standard Standard Estándar Standard
Text Texte Texto Testo
Grafiken Images Gráficos Grafica
Spielfilm Film Película Film
Benutzer Utilisateur Usuario Utente
Auswahl Sélectionner Seleccionar Seleziona
Fréquences
non
supportées
Frequencias no
soportadas
language: (NON_EMEA)
Français
(法语)
Español
(西班牙语)
Frequenza
non supportata
Assenza
segnale
Italiano
(意大利语)
输入
不支援
入力はサポートさ
れて
いません
无讯号 信号なし
简体中文 日本語
标准 標準
文本 テキスト
图形 グラフィックス
电影 ムービー
用户 ユーザー
选取 選択
1.English
(英语)
Picture Изображ. Bild Image Imagen Immagine Beeld Kuva
2.Russian
(俄语)
3.Deutsch
(德语)
4.Français
(法语)
5.Español
(西班牙语)
6.Italiano
(意大利语)
7.Dutch
(荷兰语)
8.Finnish
(芬兰语)
Acer Acer –LCD-G205H
Acer eColor
Management
Brightness Яркость Helligkeit Luminosité Brillo Luminosità Helderheid Kirkkaus
Contrast Контрастность Kontrast Contraste Contraste Contrasto Contrast Kontrasti
H.Position
V.Position Полож. по верт. V.Position V.Position V.Posicion V.Posizione V. positie Pystysijainti
Focus Фокусировка Fokus Netteté Nitidez Nitidezza Scherpstelling Tarkennus
Clock Частота Takt Fréquence Reloj Orologio Klok Taajuus
Colour Temp Цвет.темп. Farbtemperatur
Warm Теплый Warm Chaud Càlido Caldo Warm Lämmin
Cool Холодный Kalt Clair Frio Freddo Koel Viileä
User Пользоват. Anwender Utilisateur Usuario Utente Gebruiker Käyttäjä
Red Красный Rot Rouge Rojo Rossa Rood Punainen
Green Зеленый Grün Vert Verde Verde Groen Vihreä
Blue Синий Blau Bleu Azul Blu Blauw Sininen
Auto Config Автонастройка Autom. Abgl. Autoréglage Autoajuste Autoregolazione Autom.configuratie Autom. asetukset
Acer eColor
Management
Полож. по
гориз.
Acer eColor
Management
H.Position H.Position H.Posicion O.Posizione H. positie Vaakasijainti
Acer eColor
Management
Te mp .
Couleur
Acer eColor
Managemen
t
Temp. Color Temp. Colore Kleurtemp. Värin lämpöisyys
Acer eColor
Management
Acer eColor
Management
Acer eColor
Management
OSD OSD
OSD Timeout Вр. отобр. Меню OSD-Dauer
Setting Настр. Einstellung Réglages
Wide Mode Широкоэк.реж. Bildformate Mode Large
Full Полное Vollbild Plein écran Completa Pieno Volledig Täysikuva
Aspect Aspect
Input Вход Eingang Entrée Entrada Input Ingang Tulo
Volume Громкость Lautstärke Volume Volumen Volume Volume
Reset Сброс Rücksetzen Restaurer Reiniciar Resetare Opn.instellen Nollaus
Please Wait Подождите Bitte warten
Information Информация Info Informations Información Informazioni Informatie Informaatio
Exit Выход Beenden Quitter Salida Uscita Afsluiten Lopeta
DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI DDC/CI
Délai de
l'OSD
Veuillez
patienter
T. de espera
OSD
Configuració
n
Modo
panorámico
Espere, por
favor
Intervallo OSD Time-out OSD Aikakatkaisu
Impostazione Instelling Asetus
Modo Wide Breedbeeldmodus Laajakuva
Äänenvoim.
Attendere prego Een ogenblik geduld Odota
ACM
ON Вкл EIN Allumé ACTIVADO ATTIVA AAN PÄÄLLÄ <ON>
OFF Выкл Aus OffEteinte Apagado Spento Uit Pois päältä
Message menu: (EMEA)
ACM ACM ACM ACM ACM ACM ACM
English
(英语)
Russian
(俄语)
Deutsch
(德语)
Français
(法语)
Español
(西班牙语)
Italiano
(意大利语)
Dutch
(荷兰语)
Finnish
(芬兰语)
Acer Acer –LCD-G205H
Auto Config
Please Wait
Автонастройка,
подождите...
Autom. Abgl.
Bitte warten
Autoréglage
Veuillez patienter
Autoajuste
Espere, por
favor
Autoregolazione
Attendere prego
Bezig met
automatische
configuratie, een
ogenblik geduld
Autom.
asetukset.
Odota
Cable Not
Connected
Input Not
Supported
No Signal Нет сигнала Kein signal Pas de signal Sin señal Assenza segnale Geen signaal Ei signaalia
Color management OSD
English
(英语)
Standard Стандарт Standard Standard Estándar Standard Standaard Vakio
Text Текст Text Te x te Text o Te sto Te k st Tek s ti
Graphics Изображение Grafiken Images Gráficos Grafica Grafische Grafiikka
Movie Кино Spielfilm Film Película Film Film Elokuva
User Пользователь Benutzer Utilisateur Usuario Utente Gebruiker Käyttäjä
Adjust/Exit
Кабель не
подключен
Вход не
поддерживается
Russian
(俄语)
Adjust/Exit
Adjust/Exit Adjust/Exit Adjust/Exit Adjust/Exit Adjust/Exit Adjust/Exit
Leitung nicht
angeschlossen
Frequenzen
nicht
unterstützt
(scenario OSD)
Deutsch
(德语)
Câble non
connecté
Fréquences non
supportées
Cable no
conectado
Frequencias
no
soportadas
Cavo non
connesso
Frequenza
non supportata
Kabel niet
aangesloten
Ingang niet
ondersteund
Kaapeli ei
Tuloa ei tueta
language: (EMEA)
Français
(法语)
Español
(西班牙语)
Italiano
(意大利语)
Dutch
(荷兰语)
Finnish
(芬兰语)
kiinni
7. Mechanical
7.1 Dimension
Width
Height
Depth
Monitor Weight
7.2 Cabinet Material
Cabinet Plastic Material
Front Bezel
Back Cover
Base
Cabinet Texture ACER SPECIFICATION
Dimension
SEC&CMO LG
486.80mm 486.80mm
369.00mm(W/Base),
308.9mm(W/O Base)
192.27mm(W/Base),
60.40mm(W/O Base)
369.00mm(W/Base),
308.9mm(W/O Base)
192.27mm(W/Base),
60.40mm(W/O Base)
4.30±0.3Kg 3.80±0.3Kg
Cabinet Material Spec
ABS (PMMA)
BLACK
BLACK
BLACK
7.3 Mechanical Specification
Mechanical Spec
Bezel Gap Specification
≦1.0mm
Screen printed Parts Front bezel
7.4 Base Mechanical Interface
Acer Acer –LCD-G205H
items Spec
Tilt
Wall Mount
8. Package
7.1 Unit Package Specification
7.1.1 Units package
Compliance with TCO03, -4°(+/-1°) ~+14°(+/-1°)
100mm x 100 mm
Items
Packaging Refer to ME PACKING SPEC
Ink TBD
Length 535+/-2.0mm
Height 420+/-2.0mm
Width 127.5+/-2.0mm
Gross Weight 5.8±0.5kg
Units per Pallet 90sets/pallet
40’ /20’ Container Loading, Palletized 1890sets/900sets
7.1.2 Unit Packing Vibration
Testing with vibration shall be done in each of three mutually perpendicular axes. Axes are referenced to the
position of system as it normally sits in front of user, i.e., Front-to-back, side-to-side and top-to-bottom.
7.1.2.1 Random Vibration
Spec
Items Description
Sweep Frequency 1~200Hz
Amplitude 1.14 Grms
Duration Time 30 minute each axis
Direction 3 mutually perpendicular axes (x, y, z)
RANDOM VIBRATION SPECTRUM BREAK POINTS
Frequency (Hz) PSD, G2/Hz
1 0.0001
4 0.01
100 0.01
200 0.001
7.1.3 Non operation Thermal Shock
Test
Item Description
Temperature -200C to 600C
25
Reset cycles times
Total cycles 3 cycles
7.1.4
Package Drop
Drop height
Select drop height according to the gross weight refer to the table at below
Gross Weight(kg)
ºC>60ºC (10hrs)>25ºC (2hrs)>-20ºC (10hrs)>25ºC
3cycles ,
every transition time 0.5 hr,
1.0<W≦9.0
Acer Acer –LCD-G205H
Drop Height(cm)
Drop sequence and orientation
Drop Drop onto Type Drop Figure
Step 1 Corner(2-3-5)of package Corner
Step 2 Edge(3-5) of package Edge
Step 3 Edge(2-3) of package Edge
Step 4 Edge(2-5) of package Edge
Step 5 Face(bottom-3)of package Flat
Step 6 Face(left-4) of package Flat
Step 7 Face(front-5) of package Flat
Step 8 Face(right-2) of package Flat
Step 9 Face(rear-6) of package Flat
Step 10 Face(Top-1) of package Flat
Mechanical and electrical damage should not exist after vibration test, and shall be submitted for approval
customer before mass production.
76
(
3
EMBED AutoCAD.Drawing.16
!!45
9.
Marking and Identification
9.1 S/N Label
The approval marking is required by the countries of sales destination.
9.2 Carton label
The approval marking is required by the countries of sales destination.
Acer Acer –LCD-G205H
Acer Acer –LCD-G205H
02. Flat Panel Specification
Acer Acer –LCD-G205H
Acer Acer –LCD-G205H
Loading...