Acer G193WL User Manual

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1 To clean the LCD monitor screen:

• Turn o the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely

damage it.

3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform

servicing of any nature.

5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor

outside this range may result in permanent damage.

6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Package contents

LCD monitor

AC Power

cable

Attaching the monitor to the base

1 Remove the monitor base from the packaging and place it on a stable and level workspace. 2 Remove the monitor from the packaging. 3 Attach the monitor stand arm to the base.

• Ensure that the base is locked onto the monitor stand arm. (for selected models)

•

Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin.

(for selected models)

Connecting your monitor to a computer

1 Turn o your computer and unplug your computer’s power cord. 2 Connect the signal cable to the VGA and/or DVI-D (optional) input

socket of the monitor, and the VGA and/or DVI-D (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.

3 Connect one end of the adapter to the monitor and the other end

to a properly grounded, AC outlet.

4 Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

DVI cable

(Optional)

VGA cable AC Adapter

User guide

S190WL

LCD MONITOR

P/N:MU.LUH00.008

1947-1600-1141

English

Quick start guide

Panel controls

No. Item Description

1 Power button/

indicator

< / > button Press the < / > button to navigate to the

3 Menu/Enter

button

4 Auto/Exit

button

5 Empowering

Key

Turns the monitor on/o. Blue indicates power on. Blinking blue indicates standby/ power saving mode.

desired function or to change the settings of the current function.

Press to view the OSD menu. Press it again to

enter a selection in the OSD menu.

• When the OSD menu is active, press this button to exit the OSD menu.

• When the OSD menu is inactive, press this button to activate the Auto Adjustment

function.

Press this button to open the Acer eColor

Management OSD and access the scenario modes.