Specifications and Main Features
- Model: AeroNote FP563
- Display type: 15.0\ activeTF Panel
- Viewable Diagonal: 38.1cm
- Pixels: 1,024 x 768 max pixels
- Display: 16.7 million
- Contrast / Brightness: 350:1 /250 cd/m²
- Response Time: 30 ms
- Viewing Angle: L/R 75/75, 70/70 up/down
- Line Frequency: 31.47 - 60.02kHz
- Image Frequency: 56.25 - 75.0Hz
- Power Consumption: Max 30 watts Power saving < 3 watts
- Input: RGB Analog 0.7Vpp 75 Ohm-positive
- Transmission Connection: 15 pin mini D sub cable
- Operating Temp: 5°C – 40°C
- Operating Humidity: 20% - 85%
- Weight: 5.3kgs
- Dimension: 380mm(W) ,383mm(H),186mm(D)
- Certification: TCO 99 (Optional), TUV/Ergonomics, CSA, TUVGS, IEC950, FCC Bs, DSNF, ISO 13406-2 VCCI, UL, CB report, CE, C-tick, Bsmi
- Working Voltage: Automatic switched mode power supply, 90-264V, 47-63Hz
Frequently Asked Questions
Q: What if the image is blurred?
A: Please read the chapter Installation Ajustment and set the resolution and refresh rate according to to the instructions.
Q: What actions must I take if I notice pixel errors on my screen's display?
A: You may have pixel errors if one or multiple pixels of your screen’s display are stuck in one color or are always black. Usually, pixel errors are a result of the manufacturing process.
Q: What factors can help to repair the image that appears to have a defective color?
A: If the issue still persists, check the VGA cable for bent or broken connections to fix the issue. The other possible solution would be to adjust the color parameters in the OSD menu.
Q: Is there anything I should check if my monitor shows no image?
A: There could be an issue with the power supply or external connection that you need to check if your monitor’s LED is not blinking. If the LED blinks orange, try moving your mouse and pressing monitor buttons, as the device may be in power management mode.
Q: What should be done to ensure proper visibility of the image on a monitor that flickers or appears to be distorted?
A: Install the monitor drivers following the guide to select the correct refresh rate and maximum resolution which matches the specifications of the installation instructions.
Q: How can I make changes that would help to optimize the quality of the picture displayed on the screen?
A: Using the iKey function with the provided adjustment software will help in starting the auto adjustment in addition to going into the OSD menu to modify the brightness and contrast settings manually.
User Manual
Loading...