Acer EY.JE001.002 Instruction manual
i
English
Copyright © 2011. Acer Incorporated.
All Rights Reserved.
Acer Projector C120 Series User's Guide
Original Issue: 9/2011
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or
changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company
makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specically disclaims the
implied warranties of merchantability or tness for a particular purpose.
Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial
number and model number are recorded on the label afxed to your projector. All correspondence concerning your unit should include
the serial number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically,
mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.
Acer Projector C120 Series
Model number: _______________________________________
Serial number: _______________________________________
Date of purchase: _____________________________________
Place of purchase: ____________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein
for identication purposes only and belong to their respective companies.
• Do not use this product near water.
• Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.
• Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed,
sofa, rug or other similar surface.
• This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper
ventilation is provided.
• Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or
short-out parts that could result in a re or electric shock. Never spill liquid of any kind onto or into the product.
• To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.
• Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or
damage rotor devices.
Information for your safety and comfort
Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to the external power supply unit:
• Install the power supply unit before connecting the power cord to the AC power outlet.
• Unplug the power cord before removing the power supply unit from the projector.
• If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power
supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as
possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.
....................................................................................................
Warning:
English
ii
Product servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other
risks. Refer all servicing to qualied service personnel.
Refer servicing to qualied service personnel when:
• the power cord or plug is damaged, cut or frayed
• liquid was spilled into the product
• the product was exposed to rain or water
• the product has been dropped or the case has been damaged
• the product exhibits a distinct change in performance, indicating a need for service
• the product does not operate normally after following the operating instructions
....................................................................................................
Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls
may result in damage and will often require extensive work by a qualied technician to restore the product to normal condition.
....................................................................................................
Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for
purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children.
Additional safety information
• Do not look into the projector's lens when the light is on. The bright may hurt your eyes.
• Turn on the projector rst and then signal sources
• Do not place the product in following environments:
• Space that is poorly ventilated or conned. At least 50cm clearance from walls and free ow of air around the projector is necessary.
• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.
• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the life span and
darkening the image.
• Locations near re alarms.
• Locations with an ambient temperature above 40 ºC/104 ºF.
• Locations where the altitudes are higher than 10000 feet.
• Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your
projector. It might cause re or electric shock. In this case, unplug immediately and contact your dealer.
• Do not keep using this product to break or drop it. In this case contact your dealer for inspection.
• Do not face the projector lens to the sun. It can lead to re.
• Do not frequrntly turn off the mail power abruptly or unplug the projector during operation.
• Clean the air lter frequently if have. The temperature inside may rise and cause damage when the lter/ventilation slots clogged with
dirt or dust.
• Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated
and deformed or even cause a re.
• Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. Refer servicing only to
suitable qualied professional service personnel.
• Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage.
Caution for Listening
To protect your hearing, follow these instructions.
• Increase the volume gradually until you can hear clearly and comfortably.
• Do not increase the volume level after your ears have adjusted.
• Do not listen to music at high volumes for extended periods.
• Do not increase the volume to block out noisy surroundings.
• Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global
environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit
http://www.acer-group.com/public/Sustainability/sustainability01.htm
iii
English
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference
to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certied to comply with the Class B limits may be attached to this
equipment.
Operation with non-certied peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal
Communications Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.
Declaration of Conformity for EU countries
Acer hereby declares that this projector series is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certication
Radio device regulatory notice
....................................................................................................
Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless
use.
Depending on congurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth
modules).
Canada - Low-power license-exempt radio communication devices (RSS-210)
a. Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
b. Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is
subject to licensing.
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please
contact the local ofce in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
Loading...