Page 1
Product type Notebook computer
Product category A
Manufacturer name, address
Acer Italy s.r.l,
Via Lepetit, 40, 20020 Lainate (MI) Italy
Product model number
C735;
CB3-131.
Year of manufacture 2015
E
TEC
allowance with capability
adjustments when discrete graphics cards
are disabled (from 1 July 2014)
36 kWh/year
E
TEC
allowance with capability
adjustments when discrete graphics cards
are enabled (from 1 July 2014)
Not applicable
E
TEC
allowance with capability
adjustments when discrete graphics cards
are disabled (from 1 January 2016)
27 kWh/year
E
TEC
allowance with capability
adjustments when discrete graphics cards
are enabled (from 1 January 2016)
Not applicable
Whether all discrete graphics card are
enabled during the test
Not applicable
Whether switchable graphics mode with
UMA is driving the display during the test
Not applicable
E
TEC
of highest power-demanding
configuration
21.39 kWh/year
Idle state power demand 7.53 Watt
Sleep mode power demand 0.45 Watt
Sleep mode with WOL enabled power
demand
Not applicable
Off mode power demand 0.23 Watt
Off mode with WOL enabled power
demand
Not applicable
Maximum power demand Not applicable
Internal power supply (IPS) efficiency at
10 %, 20 %, 50 % and 100 % of rated
output power
Not applicable
External power supply's (EPS) average
active efficiency
87.90%
Noise levels (the declared A-weighted
sound power level, L
WAd
) of idle mode
2.70 B
Technical Documentation of (EU) No 617/2013
Page 2
Noise levels (the declared A-weighted
sound power level, L
WAd
) of "HDD random
seek" mode
Not applicable
Minimum number of loading cycles that
the batteries can withstand
400 cycles
Configuration of memory 2~4 GB
Configuration of internal storage 1 piece
Configuration of discrete television tuner 0 piece
Configuration of discrete audio card 0 piece
Configuration of discrete graphics cards 0 piece
Configuration of discrete graphics cards
category
Not applicable
The external package of the notebook
provides the information, "The battery in
this product cannot be easily replaced by
users themselves."
Yes
For products with an integrated display,
the total content of mercury is
0 mg
Measurement methodology for E
TEC
COMMISSION REGULATION (EU) No
617/2013 of 26 June 2013 implementing
Directive 2009/125/EC of the European
Parliament and of the Council with regard
to ecodesign requirements for computers
and computer servers:
ANNEX II Ecodesign requirements and
timetable:
1.3.1. E
TEC
formula.
Measurement methodology for idle mode
EN 62623:2013 — Desktop and notebook
computers — Measurement of energy
consumption:
5.2. Test setup;
5.3.4. Measuring long idle mode;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy;
Annex E.2 (informative) ENERGY STAR
®
V5 compliant testing methodology.
Page 3
Measurement methodology for sleep
mode
EN 62623:2013 — Desktop and notebook
computers — Measurement of energy
consumption:
5.2. Test setup;
5.3.3. Measuring sleep mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
Measurement methodology for off mode
EN 62623:2013 — Desktop and notebook
computers — Measurement of energy
consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
Measurement methodology for IPS
efficiency
Not applicable
Measurement methodology for EPS
efficiency
EN 50563:2011 External a.c.—d.c. and
a.c.—a.c. power supplies —
Determination of no-load power and
average efficiency of active modes.
Page 4
Measurement methodology for noise level
ECMA-109 2nd edition (December 1987)
Declared Noise Emission Values of
Computer and Business Equipment:
4. Determination of the declared noise
emission values.
ECMA-74 11th edition (December 2010)
Measurement of Airborne Noise emitted
by Information Technology and
Telecommunications Equipment:
5. Installation and operating instructions;
6. Method for determination of sound
power levels of equipment in
reverberation test rooms;
7. Method for determination of sound
power levels of equipment under
essentially free-field conditions over a
reflecting plane;
Annex C.15 Equipment category:
personal computers and workstations.
Measurement methodology for battery
loading cycles
EN 61960:2011 Secondary cells and
batteries containing alkaline or other non-
acid electrolytes — Secondary lithium
cells and batteries for portable
applications:
7.6.1 General;
7.6.3 Endurance in cycles (accelerated
test procedure).
Sequence of steps for achieving a stable
condition with respect to power demand
EN 62623:2013 — Desktop and notebook
computers — Measurement of energy
consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.3.3. Measuring sleep mode;
5.3.4. Measuring long idle mode.
Description of how sleep mode was
selected or programmed
EN 62623:2013 — Desktop and notebook
computers — Measurement of energy
consumption:
5.2. Test setup;
5.3.3. Measuring sleep mode.
Page 5
Description of how off mode was selected
or programmed
EN 62623:2013 — Desktop and notebook
computers — Measurement of energy
consumption:
5.2. Test setup;
5.3.2. Measuring off mode.
Sequence of events required to reach the
mode where the equipment automatically
changes to sleep mode
ENERGY STAR® Program Requirements
Product Specification for Computers,
Eligibility Criteria Version 6.0, Rev. Oct2013:
1.D.4 Sleep Mode.
Sequence of events required to reach the
mode where the equipment automatically
changes to off mode
Not applicable
The duration of idle state condition before
the computer automatically reaches sleep
mode, or another condition which does
not exceed the applicable power demand
requirements for sleep mode
30 minutes
The length of time after a period of user
inactivity in which the computer
automatically reaches a power mode that
has a lower power demand requirement
than sleep mode
30 minutes
The length of time before the display
sleep mode is set to activate after user
inactivity
10 minutes
User information on the energy-saving
potential of power management
functionality
http://www.energystar.gov/index.cfm?c=p
ower_mgt.pr_power_mgt_users
User information on how to enable the
power management functionality
http://www.energystar.gov/index.cfm?c=p
ower_mgt.pr_power_mgt_users
Test parameter for ambient temperature 25 ℃
Test parameter for test voltage 230 V
Test parameter for frequency 50 Hz
Test parameter for total harmonic
distortion of the electricity supply system
3 %
Page 6
Test parameter for information and
documentation on the instrumentation,
set-up and circuits used for electrical
testing
Equipment setup:
1.1 AC Power Source: Chroma model
61602
1.2 Power-Meter: YOKOGAWA WT210
2. Test Condition:
2.1 AC Power Source :
2.1.1 Input power and frequency:
230Volts (+/-1%) AC, 50Hz (+/-1%)
Relative Humidity: 50%
Loading...