Acer 7110, 9410 User Manual

Aspire 9410/7110 Series

User's Guide

Copyright © 2006. Acer Incorporated.
All Rights Reserved.

Aspire 9410/7110 Series User's Guide
Original Issue: 02/2006

Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.

Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.

Aspire 9410/7110 Series Notebook PC

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.

Information for your safety and comfort

Safety instructions

Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Warnings

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

iii

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult
your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.

iv

This product's AC adapter is equipped with a three-wire grounded plug.

•

The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.

Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grounded may result in electric shock
and/or injury.

Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6
meters (15 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may
result in damage and will often require extensive work by a
qualified technician to restore the product to normal condition.

Replacing the battery pack

The notebook uses lithium batteries. Replace the battery with the same type as
that which came bundled with your product. Use of another battery may
present a risk of fire or explosion.

Warning! Batteries may explode if not handled properly. Do not
disassemble or dispose of them in fire. Keep them away from
children. Follow local regulations when disposing of used
batteries.

Telephone line safety

• Disconnect all telephone lines from the equipment when not in use and/or

before servicing.

• To avoid the remote risk of electric shock from lightning, do not connect

the telephone line to this equipment during lightning or thunderstorms.

Warning! For safety reasons, do not use non-compliant parts
when adding or changing components. Consult your reseller for
purchase options.

Disposal instructions

Do not throw this electronic device into the trash when discarding.
To minimize pollution and ensure utmost protection of the global environment,
please recycle. For more information on the Waste from Electrical and
Electronics Equipment (WEEE) regulations, visit
http://global.acer.com/about/environmental.htm

.

v

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org
information, check www.lamprecycle.org

. For lamp-specific disposal

.

vi

Tips and information for comfortable use

Computer users may complain of eyestrain and headaches after prolonged use.
Users are also at risk of physical injury after long hours of working in front of a
computer. Long work periods, bad posture, poor work habits, stress,
inadequate working conditions, personal health and other factors greatly
increase the risk of physical injury.

Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis,
tenosynovitis or other musculoskeletal disorders. The following symptoms may
appear in the hands, wrists, arms, shoulders, neck or back:

• numbness, or a burning or tingling sensation

• aching, soreness or tenderness

• pain, swelling or throbbing

• stiffness or tightness

• coldness or weakness

If you have these symptoms, or any other recurring or persistent discomfort
and/or pain related to computer use, consult a physician immediately and
inform your company's health and safety department.

The following section provides tips for more comfortable computer use.

Finding your comfort zone

Find your comfort zone by adjusting the viewing angle of the monitor, using a
footrest, or raising your sitting height to achieve maximum comfort. Observe
the following tips:

• refrain from staying too long in one fixed posture

• avoid slouching forward and/or leaning backward

• stand up and walk around regularly to remove the strain on your leg

muscles

• take short rests to relax your neck and shoulders

• avoid tensing your muscles or shrugging your shoulders

• install the external display, keyboard and mouse properly and within

comfortable reach

• if you view your monitor more than your documents, place the display at

the center of your desk to minimize neck strain

Taking care of your vision

Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive
room lighting, poorly focused screens, very small typefaces and low-contrast
displays could stress your eyes. The following sections provide suggestions on
how to reduce eyestrain.

vii

Eyes

• Rest your eyes frequently.

• Give your eyes regular breaks by looking away from the monitor and

focusing on a distant point.

• Blink frequently to keep your eyes from drying out.

Display

• Keep your display clean.

• Keep your head at a higher level than the top edge of the display so your

eyes point downward when looking at the middle of the display.

• Adjust the display brightness and/or contrast to a comfortable level for

enhanced text readability and graphics clarity.

• Eliminate glare and reflections by:

• placing your display in such a way that the side faces the window or

any light source

• minimizing room light by using drapes, shades or blinds

• using a task light

• changing the display's viewing angle

• using a glare-reduction filter

• using a display visor, such as a piece of cardboard extended from the

display's top front edge

• Avoid adjusting your display to an awkward viewing angle.

• Avoid looking at bright light sources, such as open windows, for extended

periods of time.

Developing good work habits

Develop the following work habits to make your computer use more relaxing
and productive:

• Take short breaks regularly and often.

• Perform some stretching exercises.

• Breathe fresh air as often as possible.

• Exercise regularly and maintain a healthy body.

Warning! We do not recommend using the computer on a couch
or bed. If this is unavoidable, work for only short periods, take
breaks regularly, and do some stretching exercises.

Note: For more information, please refer to "Regulations and
safety notices" on page 76 in the AcerSystem User's Guide.

viii

First things first

We would like to thank you for making an Acer notebook your choice for
meeting your mobile computing needs.

Your guides

To help you use your Acer notebook, we have designed a set of guides:

First off, the Just for Starters... poster helps you get started with
setting up your computer.

The printed User's Guide introduces you to the basic features and
functions of your new computer. For more on how your computer
can help you to be more productive, please refer to the
AcerSystem User's Guide. This guide contains detailed
information on such subjects as system utilities, data recovery,
expansion options and troubleshooting. In addition it contains
warranty information and the general regulations and safety
notices for your notebook. It is available in Portable Document
Format (PDF) and comes preloaded on your notebook. Follow
these steps to access it:

1 Click on Start, All Programs, AcerSystem.
2 Click on AcerSystem User's Guide.
Note: Viewing the file requires Adobe Reader. If Adobe Reader is

not installed on your computer, clicking on AcerSystem User's
Guide will run the Adobe Reader setup program first. Follow the
instructions on the screen to complete the installation. For
instructions on how to use Adobe Reader, access the Help and
Support menu.

Basic care and tips for using your computer

Turning your computer on and off

To turn on the computer, simply press and release the power button below the
LCD screen beside the easy-launch buttons. See "Front view" on page 15 for the
location of the power button.

To turn the power off, do any of the following:

• Use the Windows shutdown command

Click on Start, Turn Off Computer, then click on Turn Off.

• Use the power button

You can also shut down the computer by closing the display cover, or by
pressing the sleep hotkey <Fn> + <F4>.

Note: If you cannot power off the computer normally, press and
hold the power button for more than four seconds to shut down
the computer. If you turn off the computer and want to turn it on
again, wait at least two seconds before powering up.

Taking care of your computer

Your computer will serve you well if you take care of it.

• Do not expose the computer to direct sunlight. Do not place it near sources

of heat, such as a radiator.

• Do not expose the computer to temperatures below 0 ºC (32 ºF) or above

50 ºC (122 ºF).

• Do not subject the computer to magnetic fields.

• Do not expose the computer to rain or moisture.

• Do not spill water or any liquid on the computer.

• Do not subject the computer to heavy shock or vibration.

• Do not expose the computer to dust or dirt.

• Never place objects on top of the computer.

• Do not slam the computer display when you close it.

• Never place the computer on uneven surfaces.

ix

Taking care of your AC adapter

Here are some ways to take care of your AC adapter:

• Do not connect the adapter to any other device.

• Do not step on the power cord or place heavy objects on top of it.

Carefully route the power cord and any cables away from foot traffic.

• When unplugging the power cord, do not pull on the cord itself but pull

on the plug.

• The total ampere ratings of the equipment plugged in should not exceed

the ampere rating of the cord if you are using an extension cord. Also, the
total current rating of all equipment plugged into a single wall outlet
should not exceed the fuse rating.

x

Taking care of your battery pack

Here are some ways to take care of your battery pack:

• Use only batteries of the same kind as replacements. Turn the power off

before removing or replacing batteries.

• Do not tamper with batteries. Keep them away from children.

• Dispose of used batteries according to local regulations. Recycle if possible.

Cleaning and servicing

When cleaning the computer, follow these steps:
1 Turn off the computer and remove the battery pack.
2 Disconnect the AC adapter.

3 Use a soft, moist cloth. Do not use liquid or aerosol cleaners.
If either of the following occurs:

• the computer has been dropped or the body has been damaged;

• the computer does not operate normally

please refer to "Frequently asked questions" on page 46.

Information for your safety and comfort iii

Safety instructions iii
Disposal instructions v
Tips and information for comfortable use vi

First things first viii

Your guides viii
Basic care and tips for using your computer viii

Turning your computer on and off viii
Taking care of your computer ix
Taking care of your AC adapter ix
Taking care of your battery pack x
Cleaning and servicing x

Acer Empowering Technology 1

Empowering Technology password 1
Acer eDataSecurity Management
(for selected models) 2
Acer eLock Management 3
Acer ePerformance Management 5
Acer eRecovery Management 6
Acer eSettings Management 8
Acer eNet Management
(for selected models) 9
Acer ePower Management 11
Acer ePresentation Management 14

Your Acer notebook tour 15

Front view 15
Closed front view 16
Left view 17
Right view 18
Rear view 19

Base view 20
Specifications 21
Indicators 26
Easy-launch buttons 27
Touchpad 28

Touchpad basics 28
Using the keyboard 30

Contents

Lock keys and embedded numeric keypad 30
Windows keys 31
Hotkeys 31

Special keys 33
Ejecting the optical (CD or DVD) drive tray 34
Using a computer security lock 34
Audio 35

Adjusting the volume 35
Acer OrbiCam 36

Launching the Acer OrbiCam 37

Changing the Acer OrbiCam settings 37

Capturing photos/videos 39

Using the Acer OrbiCam as webcam 39

Enabling the Acer VisageON

(for 1.3 megapixel camera models only) 40
Using the system utilities 43

Acer GridVista (dual-display compatible) 43

Launch Manager 44

Norton AntiVirus 45
Frequently asked questions 46

Requesting service 49

International Travelers Warranty (ITW) 49
Before you call 49

Acer Arcade 50

Finding and playing content 51

Settings 51

Arcade controls 52

Navigation controls 52
Player controls 52
Virtual keyboard 53
Background mode 53

Cinema 54

Settings 54

Album 55

Editing Pictures 55
Slide Show settings 55

Video 56

Playing a video file 56
Snapshot 56

Editing video 56
Music 57
Make DVDs 57

Authoring CD/DVDs 57

Taking your notebook PC with you 59

Disconnecting from the desktop 59
Moving around 59

Preparing the computer 59

What to bring to meetings 60
Taking the computer home 60

Preparing the computer 60

What to take with you 60

Special considerations 61

Setting up a home office 61
Traveling with the computer 61

Preparing the computer 61

What to take with you 61

Special considerations 62
Traveling internationally with the computer 62

Preparing the computer 62

What to bring with you 62

Special considerations 62

Securing your computer 63

Using a computer security lock 63
Using passwords 63

Entering passwords 64

Setting passwords 64

Expanding through options 65

Connectivity options 65

Fax/data modem 65

Built-in network feature 66

Universal Serial Bus (USB) 66

PC Card slot 67

Installing memory 68
BIOS utility 68

Boot sequence 68
Enable disk-to-disk recovery 69
Password 69

Using software 69

Playing DVD movies 69
Power management 70
Acer eRecovery Management 70

Create backup 71
Restore from backup 71
Create factory default image CD 72
Re-install bundled software without CD 72
Change password 73

Troubleshooting 74

Troubleshooting tips 74
Error messages 74

Regulations and safety notices 76

ENERGY STAR guidelines compliance 76
FCC notice 76
Modem notices 77
Laser compliance statement 80
LCD pixel statement 80
Macrovision copyright protection notice 80
Radio device regulatory notice 81
General 81
European Union (EU) 81
The FCC RF safety requirement 82
Canada — Low-power license-exempt radio
communication devices (RSS-210) 83
Federal Communications Comission
Declaration of Conformity 84
Declaration of Conformity for CE Marking 85
LCD panel ergonomic specifications 86

Index 87

1

Acer Empowering Technology

Acer's innovative Empowering Technology toolbar makes it easy for you to
access frequently used functions and manage your new Acer computer.
Displayed by default in the upper-right corner of your screen, it features the
following handy utilities:

• Acer eDataSecurity Management protects data with passwords and

advanced encryption algorithms (for selected models).

• Acer eLock Management limits access to external storage media.

• Acer ePerformance Management improves system performance by

optimizing disk space, memory and registry settings.

• Acer eRecovery Management backs up and recovers data flexibly, reliably

and completely.

• Acer eSettings Management accesses system information and adjusts

settings easily.

• Acer eNet Management hooks up to location-based networks intelligently

(for selected models).

• Acer ePower Management extends battery power via versatile usage

profiles.

• Acer ePresentation Management connects to a projector and adjusts

display settings conveniently.

Empowering Technology

For more information, right click on the Empowering Technology toolbar, then
select the Help or Tutorial function.

Empowering Technology password

Before using Acer eLock Management and Acer eRecovery Management, you
must initialize the Empowering Technology password. Right-click on the
Empowering Technology toolbar and select "Password Setup" to do so. If you
do not initialize the Empowering Technology password, you will be prompted
to do so when running Acer eLock Management or Acer eRecovery
Management for the first time.

Note: If you lose your password, there is no method to reset it except by
reformatting your notebook or taking your notebook
to an Acer Customer Service Center. Be sure to remember or write
down your password.

2

Acer eDataSecurity Management (for selected models)

Acer eDataSecurity Management is a handy file encryption utility that protects
your files from being accessed by unauthorized persons. It is conveniently
integrated with Windows Explorer as a shell extension for quick and easy data
encryption/decryption and also supports on-the-fly file encryption for MSN
Messenger and Microsoft Outlook.

The Acer eDataSecurity Management setup wizard will prompt you for a

Empowering Technology

supervisor password and default encryption. This encryption will be used to
encrypt files by default, or you can choose to enter your own file-specific
password when encrypting a file.

Note: The password used to encrypt a file is the unique key that

the system needs to decrypt it. If you lose the password, the

supervisor password is the only other key capable of decrypting

the file. If you lose both passwords, there will be no way to

decrypt your encrypted file! Be sure to safeguard all related

passwords!

Acer eLock Management

3

Empowering Technology

Acer eLock Management is a security utility that allows you to lock your
removable data, optical and floppy drives to ensure that data can't be stolen
while your notebook is unattended.

• Removable data devices — includes USB disk drives, USB pen drives, USB

flash drives, USB MP3 drives, USB memory card readers, IEEE 1394 disk
drives and any other removable disk drives that can be mounted as a file
system when plugged into the system.

• Optical drive devices — includes any kind of CD-ROM or DVD-ROM drives.

• Floppy disk drives — 3.5-inch disks only.

• Interfaces — includes serial port, parallel port, infrared (IR), and Bluetooth.

4

To activate Acer eLock Management, a password must be set first. Once set, you
can apply locks to any of the devices types. Lock(s) will immediately
be set without any reboot necessary, and will remain locked after rebooting,
until unlocked.

Note: If you lose your password, there is no method to reset it

except by reformatting your notebook or taking your notebook

to an Acer Customer Service Center. Be sure to remember or write

down your password.

Empowering Technology

5

Acer ePerformance Management

Acer ePerformance Management is a system optimization tool that boosts the
performance of your Acer computer. It provides an express optimization
method to release unused memory and disk space quickly. The user can also
enable advanced options for full control over the following options:

• Memory optimization — releases unused memory and check usage.

• Disk optimization — removes unneeded items and files.

• Speed optimization — improves the usability and performance of your

Windows XP system.

Empowering Technology

6

Acer eRecovery Management

Acer eRecovery Management is a powerful utility that does away with the need
for recovery disks provided by the manufacturer. The Acer eRecovery
Management utility occupies space in a hidden partition on your system's hard
drive. By default, user-created backups are stored on the D:\ drive.

Acer eRecovery Management provides you with:

• Password protection.

• Recovery of applications and drivers.

Empowering Technology

• Image/data backup:

• Back up to HDD (set recovery point).

• Back up to CD/DVD.

• Image/data recovery tools:

• Recover from a hidden partition (factory defaults).

• Recover from the HDD (most recent user-defined recovery point).

• Recover from CD/DVD

7

Empowering Technology

For more information, please refer to "Acer eRecovery Management" on page
70 in the AcerSystem User's Guide.

Note: If your computer did not come with a Recovery CD or
System CD, please use Acer eRecovery Management's "System
backup to optical disk" feature to burn a backup image to CD or
DVD. To ensure the best results when recovering your system
using a CD or Acer eRecovery Management, detach all peripherals
(except the external Acer ODD, if your computer has one),
including your Acer ezDock.

8

Acer eSettings Management

Acer eSettings Management allows you to inspect hardware specifications,
change BIOS passwords or other Windows settings, and to monitor the system
health status.

Acer eSettings Management also:

• Provides a simple graphical user interface for navigation.

• Displays general system status and advanced monitoring for power users

on Acer computer.

Empowering Technology

9

Acer eNet Management (for selected models)

Acer eNet Management helps you to quickly and easily connect to both wired
and wireless networks in a variety of locations. To access this utility, either click
on the "Acer eNet Management" icon on your notebook, or start the program
from the Start menu. You also have the option to set Acer eNet Management to
start automatically when you boot up your PC.

Acer eNet Management automatically detects the best settings for a new
location, while offering you the freedom to manually adjust the settings to
match your needs.

Empowering Technology

10

Acer eNet Management can save network settings for a location to a profile,
and automatically switch to the appropriate profile when you move from one
location to another. Settings stored include network connection settings (IP and
DNS settings, wireless AP details, etc.), as well as default printer settings.
Security and safety concerns mean that Acer eNet Management does not store
username and password information.

Empowering Technology

11

Acer ePower Management

Acer ePower Management features a straightforward user interface. To launch
it, select Acer ePower Management from the Empowering Technology
interface.

AC mode (Adapter mode)

The default setting is "Maximum Performance." You can adjust CPU speed, LCD
brightness and other settings, or click on buttons to turn the following
functions on/off: Wireless LAN, Bluetooth, CardBus, FireWire(1394), Wired LAN

and Optical Device if supported.

DC mode (Battery mode)

There are four pre-defined profiles — Entertainment, Presentation, Word
Processing, and Battery Life. You can also define up to three of your own.

To create a new power profile:

1 Change power settings as desired.
2 Click "Save as ..." to save to a new power profile.
3 Name the newly created profile.
4 Select whether this profile is for Adapter or Battery mode, then click "OK".
5 The new profile will appear in the profile list.

Empowering Technology

12

Battery status

For real-time battery life estimates based on current usage, refer to the panel in
the upper half of the window..

Empowering Technology

For additional options, click "Settings" to:

• Set alarms.

• Re-load factory defaults.

• Select what actions to be taken when the cover is closed or the power

button is pressed.

• Set passwords for accessing the system after Hibernation or Standby.

• View information about Acer ePower Management.

13

Empowering Technology

14

Acer ePresentation Management

Acer ePresentation Management lets you project your computer's display to an
external device or projector using the hot key: Fn + F5. If auto-detection
hardware is implemented in the system and the external display supports it,
your system display will be automatically switched out when an external display
is connected to the system. For projectors and external devices that are not
auto-detected, launch Acer ePresentation Management to choose an
appropriate display setting.

Empowering Technology

Note: If the restored resolution is not correct after disconnecting a

projector, or you need to use an external resolution that is not

supported by Acer ePresentation Management, adjust your

display settings using Display Properties or the utility provided by

the graphics vendor.

15

Your Acer notebook tour

After setting up your computer as illustrated in the Just for Starters... poster,
let us show you around your new Acer notebook.

Front view

English

# Icon Item Description
1 Built-in camera 1.3 megapixel or 310,000 pixel web camera

for video communication. (for selected
models)

2 Display screen Also called Liquid-Crystal Display (LCD),

displays computer output.

English

16

# Icon Item Description
3 Status indicators Light-Emitting Diodes (LEDs) that light up to

show the status of the computer's functions
and components.

4 Wireless

communication
button

5Bluetooth

communication

button
6 Microphone Internal microphone for sound recording.
7 Touchpad Touch-sensitive pointing device which

8 Click buttons (left,

center and right)

9 Palmrest Comfortable support area for your hands

10 Keyboard For entering data into your computer.
11 Power button Turns the computer on and off.
12 Easy-launch

buttons

Enable/disables the wireless function.
Indicates the status of wireless LAN
communication.

Enable/disables the Bluetooth function.
Indicates the status of Bluetooth
communication.

functions like a computer mouse.
The left and right buttons function like the

left and right mouse buttons; the center
button serves as a 4-way scroll button.

when you use the computer.

Buttons for launching frequently used
programs. See "Easy-launch buttons" on
page 27 for more details.

Closed front view

# Icon Item Description
1 Speakers Left and right speakers deliver stereo

audio output.

2 Line-in jack Accepts audio line-in devices (e.g., audio

CD player, stereo walkman).

17

# Icon Item Description
3 Microphone-in jack Accepts input from external

microphones.

4 Headphones/speaker/

line-out jack with
S/PDIF support

5 Power indicator Indicates the computer's power status.

6 Battery indicator Indicates the computer's batttery status.

7Bluetooth

communication
indicator

8 Wireless

communication
indicator

9 Latch Locks and releases the lid.

Connects to audio line-out devices (e.g.,
speakers, headphones).

Indicates the status of Bluetooth
communication.

Indicates the status of wireless LAN
communication.

Left view

English

# Icon Item Description
1 Kensington lock

slot

2 Optical drive Internal optical drive; accepts CDs or DVDs

3 Optical disk access

indicator

4 Optical drive eject

button

5 Emergency eject

hole

Connects to a Kensington-compatible
computer security lock.

(slot-load or tray-load depending on model).
Lights up when the optical drive is active

(location depends on model).
Ejects the optical disk from the drive

(location depends on model).
Ejects the optical drive tray when the

computer is turned off
(location depends on model).

English

18

Right view

# Icon Item Description
1 PC Card slot eject

button

2 PC Card slot Accepts one Type II PC Card.

3 5-in-1 card reader Accepts Secure Digital (SD), MultiMediaCard

Ejects the PC Card from the slot.

(MMC), Memory Stick (MS), Memory Stick
PRO (MS PRO), xD-Picture Card (xD).

4 Three USB 2.0

ports

5 Ventilation slots Enable the computer to stay cool, even after

6 DC-in jack Connects to an AC adapter.

Connect to USB 2.0 devices (e.g., USB mouse,
USB camera).

prolonged use.

19

Rear view

# Icon Item Description
1 USB 2.0 port Connects to USB 2.0 devices (e.g., USB

mouse, USB camera).

2 External display

(VGA) port

3 Modem (RJ-11) port Connects to a phone line.

4 Ethernet (RJ-45)

port

5 Battery Powers the computer.

Connects to a display device (e.g., external
monitor, LCD projector).

Connects to an Ethernet 10/100/1000-based
network.

English

English

20

Base view

# Item Description
1 Battery release latch Releases the battery for removal.
2 Cooling fan Helps keep the computer cool.

Note: Do not cover or obstruct the opening of

the fan.
3 Mini PCI card bay Houses the computer's Mini PCI card.
4 Ventilation slots Enable the computer to stay cool, even after

prolonged use.
5 Memory compartment Houses the computer's main memory.
6 PCI Express Mini Card bay Houses the computer's PCI Express Mini Card.
7 Hard disk bay Houses the computer's hard disk (secured with

screws).
8 Battery lock Locks the battery in position.
9 Battery bay Houses the computer's battery pack.

21

Specifications

Operating
system

Platform Aspire 9410 Series

• Windows

• Genuine Windows

• Genuine Windows

• Genuine Windows

(Rollup 2)

Windows® Vista ™Capable PCs come with
Windows
upgraded to Windows
information on Windows

to upgrade, go to: Microsoft.com/
windowsvista.

®

Centrino® Duo mobile technology, featuring:

Intel

• Intel

®

Core™ Duo processor T2300/T2400/T2500/
T2600 (2 MB L2 cache, 1.66/1.83/2/2.16 GHz, 667 MHz
FSB)

• Mobile Intel

• Intel

Aspire 7110 Series

• Intel

®

PRO/Wireless 3945ABG network connection
(dual-band tri-mode 802.11a/b/g) Wi-Fi CERTIFIED
solution, supporting Acer SignalUp

technology

®

Celeron® M processor 410/420/430 (1 MB L2
cache, 1.46/1.60/1.73 GHz, 533 MHz FSB)

• Mobile Intel

• Acer InviLink

supporting Acer SignalUp

®

Vista™ Capable

®

XP Home Edition (Service Pack 2)

®

XP Professional (Service Pack 2)

®

XP Media Center Edition 2005

®

XP installed, and can be

®

945GM/PM Express chipset

®

940GML Express chipset

™

802.11b/g Wi-Fi CERTIFIED™ solution,

®

Vista™. For more

®

Vista™ and how

™

wireless

™

wireless technology

English

™

English

22

System memory Aspire 9410 Series

• Up to 2 GB of DDR2 533/667 MHz memory,

upgradeable to 4 GB using two soDIMM modules
(dual-channel support)

Aspire 7110 Series

• Up to 1 GB of DDR2 533 MHz memory, upgradeable

to 2 GB using two soDIMM modules (dual-channel
support)

Display and
graphics

• 17.1" WXGA+ 200-nit Acer CrystalBrite

LCD, 1440 x 900 pixel resolution, supporting
simultaneous multi-window viewing via Acer

GridVista

• NVIDIA

®

TurboCache
256 MB of shared system memory),supporting

Microsoft
High Dynamic Range (HDR) technology, NVIDIA
PowerMizer

• Mobile Intel

integrated 3D graphics, featuring Intel
Media Accelerator (GMA) 950, up to 224 MB of

shared system memory, supporting Microsoft

®

DirectX
displays

• 16.7 million colors

• MPEG-2/DVD hardware-assisted capability

• Acer CinemaVision

• Acer ClearVision

™

color TFT

™

GeForce® Go 7300 up to 512 MB

™

(256 MB of dedicated GDDR2 VRAM,

®

DirectX® 9.0, Shader Model 3.0, OpenEXR

®

6.0, PCI Express®, or

®

945GM/940GML Express chipset with

®

®

Graphics

®

9.0 and PCI Express® and dual independent

™

technology (Acer Arcade™)

™

technology (Acer Arcade™)

Storage
subsystem

TurboCache™ memory allocation varies
depending on configuration.

• 60/80/100/120 GB or higher hard disk drive

• Optical drive options:

• DVD-Super Multi double-layer

• DVD-Dual double-layer

• DVD/CD-RW combo drive

• 5-in-1 card reader, supporting Secure Digital (SD),

®

MultiMediaCard (MMC), Memory Stick

™

Memory Stick PRO

(MS PRO), xD-Picture Card™ (xD)

(MS),

23

Dimensions
and weight

Power
subsystem

Input devices

Audio

• With Acer OrbiCam

• 400 (W) x 295 (D) x 31.4/39.9 (H) mm

(15.75 x 11.61 x 1.24/1.57 inches)

• 3.81kg (8.39 Ibs.) with 8-cell battery pack

• 3.68kg (8.10 Ibs.) with 6-cell battery pack

• Without Acer OrbiCam

• 400 (W) x 295 (D) x 31.4/39.9 (H) mm

(15.75 x 11.61 x 1.24/1.57 inches)

• 3.79 kg (8.35 lbs.) with 8-cell battery pack

• 3.66 kg (8.06 lbs.) with 6-cell battery pack

™

™

• ACPI 2.0 CPU power management standard: supports

Standby and Hibernation power-saving modes

• 71 W 4800 mAh (8-cell) or 44 W 4000 mAh (6-cell)

Li-ion battery pack

• Acer QuicCharge

• 80% charge in 1 hour

• 2-hour rapid charge system-off

• 2.5-hour charge-in-use

™

technology:

• 3-pin 90 W AC adapter

• 105-/106-key keyboard

• Touchpad with 4-way scroll button

• Four easy-launch buttons

• Two LED-buttons: WLAN, Bluetooth

®

• Audio system with two built-in speakers

• Intel

• Sound Blaster Pro

®

High-Definition audio support

™

and MS Sound compatible

• S/PDIF (Sony/Philips Digital Interface) support for

digital speakers

• Built-in microphone

English

24

English

Communication

I/O interface

Security

Options and
accessories

• Acer Video Conference featuring Voice and Video

over Internet Protocol (VVoIP) support via Acer
OrbiCam

• Acer OrbiCam

pixel CMOS camera (for selected models), featuring :

• 225 degree ergonomic rotation

• Acer VisageON

• Acer PrimaLite

™

and optional Acer Bluetooth® VoIP phone

™

integrated 1.3 megapixel or 310,000

™

technology (for 1.3 megapixel

camera models only)

™

technology

• Modem: 56K ITU V.92 with PTT approval;

Wake-on-Ring ready

• LAN: gigabit Ethernet; Wake-on-LAN ready

• WPAN: Bluetooth

• WLAN: Intel

connection (dual-band tri-mode 802.11a/b/g) Wi-Fi
CERTIFIED

wireless technology (for Aspire 9410 Series)

• WLAN: integrated Acer InviLink

CERTIFIED
wireless technology (for Aspire 7110 Series)

®

2.0+EDR (Enhanced Data Rate)

®

PRO/Wireless 3945ABG network

™

solution, supporting Acer SignalUp™

™

™

solution, supporting Acer SignalUp

802.11b/g Wi-Fi

™

• PC Card slot (one Type II)

• Four USB 2.0 ports

• External display (VGA) port

• Headphones/speaker/line-out jack with S/PDIF

support

• Microphone-in jack

• Line-in jack

• Ethernet (RJ-45) port

• Modem (RJ-11) port

• DC-in jack for AC adapter

• Kensington lock slot

• BIOS user and supervisor passwords

• Acer Bluetooth

®

VoIP phone

• 512 MB, 1 or 2 GB DDR2 533/667 MHz soDIMM

module

• 8-cell Li-ion battery pack

• 6-cell Li-ion battery pack

• 3-pin 90 W AC adapter

• External USB floppy disk drive

25

Software

• Acer Empowering Technology

• Acer eDataSecurity Management (for selected

models)

• Acer eLock Management

• Acer ePerformance Management

• Acer eRecovery Management

• Acer eSettings Management

• Acer eNet Management (for selected models)

• Acer ePower Management

• Acer ePresentation Management

• Acer GridVista

• Acer Arcade

™

™

• Acer Launch Manager

™

®

®

PowerProducer

™

™

Environment

• Norton AntiVirus

• Adobe

®

Reader

• CyberLink

• NTI CD-Maker

• Temperature:

• Operating: 5 °C to 35 °C

• Non-operating: -20 °C to 65 °C

• Humidity (non-condensing):

• Operating: 20% to 80%

• Non-operating: 20% to 80%

System
compliance

• ACPI

• DMI 2.0

• Mobile PC 2002

• Wi-Fi

Warranty One-year International Travelers Warranty (ITW)

®

English

Note: The specifications listed above are for reference only. The
exact configuration of your PC depends on the model purchased.

26

Indicators

English

The computer has serveral easy-to-read status indicators:

The front panel indicators are visible even when the computer cover is closed
up.

Icon Function Description

HDD Indicates when the hard disk drive is active.

Caps Lock Lights up when Caps Lock is activated.

Num Lock Lights up when Num Lock is activated.

Power Indicates the computer's power status.

Battery Indicates the computer's batttery status.

Bluetooth Indicates the status of Bluetooth communication.

Wireless LAN Indicates the status of wireless LAN communication.

27

1. Charging: The light shows amber when the battery is charging.

2. Fully charged: The light shows green when in AC mode.

Easy-launch buttons

There are several conveniently located easy-launch buttons. They are: mail, Web
browser, Empowering Key < > and one user-programmable button.

Press < > to run the Acer Empowering Technology. Please see "Acer
Empowering Technology" on page 1. The mail and Web browser buttons are

pre-set to email and Internet programs, but can be reset by users. To set the
Web browser, mail and programmable buttons, run the Acer Launch Manager.
See "Launch Manager" on page 44.

English

Easy-launch button Default application

Acer Empowering Technology (user-programmable)

Mail Email application (user-programmable)

Web browser Internet browser (user-programmable)

P

User-programmable

28

Touchpad

English

The built-in touchpad is a pointing device that senses movement on its surface.
This means the cursor responds as you move your finger across the surface of
the touchpad. The central location on the palmrest provides optimum comfort
and support.

Touchpad basics

The following items show you how to use the touchpad:

• Move your finger across the touchpad (2) to move the cursor.

• Press the left (1) and right (4) buttons located beneath the touchpad to

perform selection and execution functions. These two buttons are similar
to the left and right buttons on a mouse. Tapping on the touchpad is the
same as clicking the left button.

• Use the 4-way scroll (3) button to scroll up or down and move left or right

a page. This button mimics your cursor pressing on the right scroll bar of
Windows applications.

Function Left button (1)

Execute Quickly click

twice.

Select Click once. Tap once.

Drag Click and hold,

then use
finger on the
touchpad to
drag the
cursor.

Access
context
menu

Scroll Click and

Right
button (4)

Click
once.

Main touchpad (2)

Tap twice (at the same
speed as double-clicking
a mouse button).

Tap twice (at the same
speed as double-clicking
a mouse button); rest
your finger on the
touchpad on the second
tap and drag the cursor.

Center
button (3)

hold to
move up/
down/left/
right.

29

English

Note: When using the touchpad, keep it — and your fingers — dry
and clean. The touchpad is sensitive to finger movement; hence,
the lighter the touch, the better the response. Tapping harder will
not increase the touchpad's responsiveness.

Note: By default, vertical and horizontal scrolling is enabled on
your touchpad. It can be disabled under Mouse settings in
Windows Control Panel.

30

Using the keyboard

English

The keyboard has full-sized keys and an embedded numeric keypad, separate
cursor, lock, Windows, function and special keys.

Lock keys and embedded numeric keypad

The keyboard has three lock keys which you can toggle on and off.

Lock key Description
Caps Lock When Caps Lock is on, all alphabetic characters typed are

Num Lock When Num Lock is on, the right hand side numeric keypad is

Scroll Lock
<Fn> + <F12>

in uppercase.

in numeric mode. The keys function as a calculator (complete
with the arithmetic operators +, -, *, and /). When Num Lock
is off, the keys assume cursor and other shortcut functions.

When Scroll Lock is on, the screen moves one line up or down
when you press the up or down arrow keys respectively.
Scroll Lock does not work with some applications.

The embedded numeric keypad functions like a desktop numeric keypad. It is
indicated by small characters located on the upper right corner of the keycaps.
To simplify the keyboard legend, cursor-control key symbols are not printed on

the keys.

Desired access Num Lock on Num Lock off
Number keys on

embedded keypad
Cursor-control keys

on embedded keypad
Main keyboard keys Hold <Fn> while typing

Type numbers in a normal
manner.

Hold <Shift> while using
cursor-control keys.

letters on embedded keypad.

Hold <Fn> while using
cursor-control keys.

Type the letters in a
normal manner.

31

Windows keys

The keyboard has two keys that perform Windows-specific functions.

Key Description

Windows key Pressed alone, this key has the same effect as clicking on

Application
key

the Windows Start button; it launches the Start menu.
It can also be used with other keys to provide a variety
of functions:

< > + <Tab>: Activates the next Taskbar button.

< > + <E>: Opens the My Computer window.

< > + <F1>: Opens Help and Support Center.

< > + <F>: Opens the Search Results window.

<> + <R>: Opens the Run dialog box.

< > + <M>: Minimizes all windows.

<Shift> + < > + <M>: Undoes the minimize all
windows action.

This key has the same effect as clicking the right mouse
button; it opens the application's context menu.

Hotkeys

The computer employs hotkeys or key combinations to access most of the
computer's controls like screen brightness, volume output and the BIOS utility.

To activate hotkeys, press and hold the <Fn> key before pressing the other key
in the hotkey combination.

English

English

32

Hotkey Icon Function Description
<Fn> + <F1> Hotkey help Displays help on hotkeys.

<Fn> + <F2> Acer eSettings Launches Acer eSettings in Acer

Empowering Technology. See
"Acer Empowering
Technology" on page 1.

<Fn> + <F3> Acer ePower

Management

<Fn> + <F4> Sleep Puts the computer in Sleep

<Fn> + <F5> Display toggle Switches display output

<Fn> + <F6> Screen blank Turns the display screen

<Fn> + <F7> Touchpad toggle Turns the internal touchpad on

<Fn> + <F8> Speaker toggle Turns the speakers on and off.

Launches Acer ePower
Management in Acer
Empowering Technology. See
"Acer Empowering
Technology" on page 1.

mode.

between the display screen,
external monitor (if connected)
and both.

backlight off to save power.
Press any key to return.

and off.

<Fn> + <↑> Volume up Increases the sound volume.

<Fn> + <↓> Volume down Decreases the sound volume.

<Fn> + <→> Brightness up Increases the screen brightness.

<Fn> + <←> Brightness down Decreases the screen brightness.

33

Special keys

You can locate the Euro symbol and the US dollar sign at the upper-center
and/or bottom-right of your keyboard.

The Euro symbol

1 Open a text editor or word processor.
2 Either press < > at the bottom-right of the keyboard, or hold <Alt Gr>

and then press the <5> key at the upper-center of the keyboard.

Note: Some fonts and software do not support the Euro symbol.
Please refer to www.microsoft.com/typography/faq/faq12.htm
more information.

The US dollar sign

1 Open a text editor or word processor.
2 Either press < > at the bottom-right of the keyboard, or hold <Shift>

and then press the <4> key at the upper-center of the keyboard.

for

English

Note: This function varies according to the language settings.

34

Ejecting the optical (CD or DVD)

English

drive tray

Press the drive eject button to eject the optical drive tray when the computer
is on.

Insert a paper clip to the emergency eject hole to eject the optical drive tray
when the computer is off.

Using a computer security lock

The notebook comes with a Kensington-compatible security slot for a security
lock.

Wrap the computer security lock cable around an immovable object such as a
table or handle of a locked drawer. Insert the lock into the notch and turn the
key to secure the lock. Keyless models are also available.

35

Audio

The computer comes with 32-bit Intel High-Definition audio, and built-in stereo
speakers.

Adjusting the volume

Use hotkeys to easily adjust the volume on your computer. See "Hotkeys" on
page 31 for more information on adjusting the speaker volume.

English

36

Acer OrbiCam

English

The Acer OrbiCam is a 1.3 megapixel or 310,000 pixel CMOS camera
appropriately mounted on top of the LCD panel. The camera's 225-degree
ergonomic rotation allows you to capture high-resolution photos or videos up
front or at the back of the LCD panel. The Acer OrbiCam fully supports the Acer
Video Conference technology so you transmit the best video conference quality
over an Instant Messenger service.

Getting to know your Acer OrbiCam

123

# Item
1Lens
2 Power indicator
3 Rubber grip (selected models only)

Rotating the Acer OrbiCam

The Acer OrbiCam rotates 225 degrees counterclockwise to achieve the desired
angle. Refer to the illustrations below.

Note: DO NOT rotate the camera clockwise to prevent damage to
the device.

For your convenience, the camera snaps to 45 degrees to match the position of
your face in front or at the back of the LCD panel.

37

Launching the Acer OrbiCam

To launch the Acer OrbiCam, double-click on the Acer OrbiCam logo in the
desktop.

OR

Click Start > All Programs > Acer > Acer OrbiCam. The Acer OrbiCam capture
window appears.

Changing the Acer OrbiCam settings

Resolution

To change the capture resolution, click the displayed resolution at the bottom
right corner of the capture window, then select the desired resolution.

English

Note: Setting the camera resolution to 640 x 480 or larger does
not change the capture window size.

English

38

Options

Click Options to display the Window, Preview, and Folder tabs. Use the options
to change the capture window size, preview settings, and the folder for
captured photos or videos.

Camera Settings

Basic settings

Click the Camera Settings icon on the bottom right corner of the capture
display, then select Camera Settings from the pop-up menu. You can adjust the
Video, Audio, and Zoom/Face tracking options from this window.

39

Capture settings

From the Camera Settings window, click the Driver Settings button. The
Properties window appears.

Device Settings allows you to change the camera brightness, contrast, hue,
saturation, sharpness, etc.

Advanced Settings allows you to activate gain control, implement image mirror,
select image enhancements and anti-flicker settings, and turn on/off the camera
indicator.

Zoom/Face Track Settings allows you to adjust the zoom level and turn the
face-tracking feature on or off.

English

Capturing photos/videos

To capture a photo or a video clip, rotate the Acer OrbiCam to get the desired
angle, then click the Take a Picture or Record a Video button. The Windows
Picture and Fax Viewer or the Windows Media Player automatically launches to
display/play a preview of the photo/video clip.

Note: By default, all photos and videos are saved in the My
Pictures and My Videos folder.

Using the Acer OrbiCam as webcam

The Acer OrbiCam is automatically selected as the capture device of any Instant
Messenger (IM) application. To use the Acer OrbiCam as a webcam, open the IM
service, then select the video/webcam feature. You can now broadcast from
your location to an IM partner anywhere in the world.

English

40

Enabling the Acer VisageON (for 1.3 megapixel camera models only)

The Acer VisageON technology comes with two features: Face tracking and
Video effects (selected models only). The face tracking feature tracks your head
movement and automatically centers your face in the capture window. The
video effects feature allows you to select and apply an effect to your video
transmissions.

Note: The face tracking feature is not capable of centering your
face beyond the capture window frame. Minimal head
movements are tracked more efficiently.

To enable the Acer VisageON:
1 Right-click on this icon, then select VisageON from the pop-up menu.

The VisageON window appears.

2 Select and apply a video effect from the left section of the VisageON

window. Change the face tracking settings and options from the right
section.

41

Using the face tracking feature

To use the face tracking feature:
1 Click the left icon down arrow button, then select Single User or Multiple

Users from the pop-up menu. For multiple users, the face tracking feature
automatically centers all the users' face in the capture window, otherwise
the utility centers the face of the user closest to the camera.

2 Click the right icon to zoom in/out or reset the current view.

3 Click VisageON to display a pop-menu that allows configuration of the

camera, face tracking and video effects settings.

English

English

42

Using video effects (selected models only)

The Video Settings section allows you to select an avatar or accessory video
effect from the list. To select an effect:

1 Click the encircled icon to display the available video effects. The Video

Effect Selection window appears.

2 Click on a video effect to use. The selected effect appears in the video

effects section of the VisageON window.

Note:

1. When using avatars, you may have to calibrate the face points
to achieve better tracking. Follow screen instructions from the
VisageON window to continue.

2. You may use video effects when using the camera for IM chat/
video sessions or call conferences.

43

Using the system utilities

Note: The system utilities work under Microsoft Windows XP only.

Acer GridVista (dual-display compatible)

Note: This feature is only available on certain models.

To enable the dual monitor feature of your notebook, first ensure that the
second monitor is connected, then, select Start, Control Panel, Display and click
on Settings. Select the secondary monitor (2) icon in the display box and then
click the check box Extend my Windows desktop onto this monitor. Finally, click
Apply to confirm the new settings and click OK to complete the process.

English

Acer GridVista is a handy utility that offers four pre-defined display settings so
you can view multiple windows on the same screen. To access this function,
please go to Start, All Programs and click on Acer GridVista. You may choose
any one of the four display settings indicated below:

12

Double (vertical), Triple (primary at left), Triple (primary at right), or Quad
Acer Gridvista is dual-display compatible, allowing two displays to be

partitioned independently.

1

3

2

1

3

2

3

1

4

2

English

44

Acer GridVista is simple to set up:
1 Run Acer GridVista and select your preferred screen configuration for each

display from the taskbar.
2 Drag and drop each window into the appropriate grid.
3 Enjoy the convenience of a well-organized desktop.

Note: Please ensure that the resolution setting of your second
monitor is set to the manufacturer's recommended value.

Launch Manager

Launch Manager allows you to set the four easy-launch buttons located above
the keyboard. "Easy-launch buttons" on page 27 for the location of the easy­launch buttons.

45

You can access the Launch Manager by clicking on Start, All Programs, and then
Launch Manager to start the application.

Norton AntiVirus

Norton AntiVirus is an anti-virus software that finds and repairs infected files,
and protects against viruses to keep your computer data safe and secure.

How do I check for viruses?

A Full System Scan scans all files on your computer. To perform a system scan:
1 Start Norton AntiVirus.

Double click on the Norton AntiVirus Icon on the desktop or click on the
Start menu in the Windows taskbar, highlight Programs, and select
Norton AntiVirus.

2 In the Norton AntiVirus main window, click Scans.

English

3In the Scans panel, click Run Full System Scan.
4 When the scan is complete, a scan summary appears. Click Finished.

You can schedule customized virus scans that run unattended on specific dates
and times or at periodic intervals. If you are using the computer when the
scheduled scan begins, it runs in the background so that you do not have to
stop working.

For more information refer to the Norton AntiVirus Help menu.

46

Frequently asked questions

English

The following is a list of possible situations that may arise during the use of
your computer. Easy solutions are provided for each one.

I turned on the power, but the computer does not start or
boot up.

Look at the power indicator:

• If it is not lit, no power is being supplied to the computer. Check the

following:

• If you are using on the battery, it may be low and unable to power

the computer. Connect the AC adapter to recharge the battery pack.

• Make sure that the AC adapter is properly plugged into the computer

and to the power outlet.

• If it is lit, check the following:

• Is a non-bootable (non-system) disk in the external USB floppy drive?

Remove or replace it with a system disk and press <Ctrl> + <Alt> +
<Del> to restart the system.

Nothing appears on the screen.

The computer's power management system automatically blanks the screen to
save power. Press any key to turn the display back on.

If pressing a key does not turn the display back on, three things might be
the cause:

• The brightness level might be too low. Press <Fn> + <→> (increase) to

adjust the brightness level.

• The display device might be set to an external monitor. Press the display

toggle hotkey <Fn> + <F5> to toggle the display back to the computer.

• If the Sleep indicator is lit, the computer is in Sleep mode. Press and release

the power button to resume.

Image is not full-screen.

Each computer display has a different native resolution depending on the
screen. If you set the resolution lower than this native resoution, the screen
expands to fill the computer display. Right-click on your Windows desktop and
select Properties to bring up the "Display Properties" dialog box. Then click on
the Settings tab to make sure that the resolution is set to the appropriate
resolution. Resolutions lower than the specified resolution are not full-screen
on the computer or on an external monitor.

47

No audio is heard from the computer.

Check the following:

• The volume may be muted. In Windows, look at the volume control

(speaker) icon on the taskbar. If it is crossed-out, click on the icon and
deselect the Mute all option.

• The volume level may be too low. In Windows, look at the volume control

icon on the taskbar. You can also use the volume control buttons to adjust
the volume. See "Hotkeys" on page 31 for more detail.

• If headphones, earphones or external speakers are connected to the line-

out port on the computer, the internal speakers automatically turn off.

I want to eject the optical drive tray without turning on the
power.

There is a mechanical eject hole on the optical drive. Simply insert the tip of a
pen or paperclip into the hole and push to eject the tray. (If your computer's
optical drive is a slot-load model, it will not have an eject hole.)

The keyboard does not respond.

Try attaching an external keyboard to a USB port on the computer. If it works,
contact your dealer or an authorized service center as the internal keyboard
cable may be loose.

The printer does not work.

Check the following:

• Make sure that the printer is connected to a power outlet and that it is

turned on.

• Make sure that the printer cable is connected securely to the computer's

parallel port or a USB port and the corresponding port on the printer.

English

I want to set up my location to use the internal modem.

To properly use your communication software (e.g. HyperTerminal), you need
to set up your location:

1 Click on Start, Settings, Control Panel.
2 Double-click on Phone and Modem Options.
3 Click on Dialing Rules and begin setting up your location.

Refer to the Windows manual.

English

48

Note: Please note, on first booting your notebook, that you can
skip the Internet Connection setup, as it is not necessary to
complete the installation of your Operating System. After the
Operating System is set up, you can proceed with the Internet
Connection setup.

I want to restore my computer to its original settings without
recovery CDs.

Note: If your system is the multilingual version, the operating
system and language you choose when you first turn on the
system will be the only option for future recovery operations.

This recovery process helps you restore the C: drive with the original software
content that is installed when you purchase your notebook. Follow the steps
below to rebuild your C: drive. (Your C: drive will be reformatted and all data
will be erased.) It is important to back up all data files before using this option.

Before performing a restore operation, please check the BIOS settings.

1 Check to see if Acer disk-to-disk recovery is enabled or not.
2 Make sure the D2D Recovery setting in Main is Enabled.
3 Exit the BIOS utility and save changes. The system will reboot.

Note: To activate the BIOS utility, press <F2> during POST.

To start the recovery process:
1 Restart the system.
2 While the Acer logo is showing, press <Alt> + <F10> at the same time to

enter the recovery process.
3 Refer to the onscreen instructions to perform system recovery.

Important! This feature occupies 4 to 5 GB in a hidden partition
on your hard disk.

49

Requesting service

International Travelers Warranty (ITW)

Your computer is backed by an International Travelers Warranty (ITW) that
gives you security and peace of mind when traveling. Our worldwide network
of service centers are there to give you a helping hand.

An ITW passport comes with your computer. This passport contains all you need
to know about the ITW program. A list of available, authorized service centers is
in this handy booklet. Read this passport thoroughly.

Always have your ITW passport on hand, especially when you travel, to receive
the benefits from our support centers. Place your proof-of-purchase in the flap
located inside the front cover of the ITW passport.

If the country you are traveling in does not have an Acer-authorized ITW service
site, you can still get in contact with our offices worldwide. Please consult
http://global.acer.com

Before you call

Please have the following information available when you call Acer for online
service, and please be at your computer when you call. With your support, we
can reduce the amount of time a call takes and help solve your problems
efficiently. If there are error messages or beeps reported by your computer,
write them down as they appear on the screen (or the number and sequence in
the case of beeps).

You are required to provide the following information:
Name: _____________________________________________
Address: ___________________________________________
Telephone number: _________________________________
Machine and model type: ____________________________
Serial number: ______________________________________
Date of purchase: ___________________________________

.

English

50

Acer Arcade

English

Acer Arcade is an integrated player for music, photos, DVD movies and videos. It
can be operated using your pointing device or remote control.

To watch or listen, click or select a content button (e.g., Music, Video, etc.) on
the Arcade home page.

• Music — listen to music files in a variety of formats

• Cinema — watch DVDs or VCDs

• Video — watch and/or edit video clips

• Album — view photos stored on your hard disk or removable media

Note: While watching videos, DVDs or slide shows, your
screensaver and power-saving features are unavailable.

51

Finding and playing content

Clicking a button on the Arcade home page opens the corresponding feature's
home page. The content pages have buttons on the left and a content browsing
area on the right. If a button shows one of several choices, such as sort order,
the current setting is shown by a brightly colored ball on the button.

To pick content, click an item in the content area. When there is more than one
CD or DVD drive, all drives will be shown. Pictures and videos are shown as files
(with thumbnails) and organized into folders.

To browse a folder, click to open it. To go back up to the folder above it, click
the Up one level button. If there is more content than will fit on a page, use the
buttons at the lower right to scroll through the pages.

Note: For more detailed information on the features of Acer
Arcade, please refer to the Arcade Help menu. This can be

accessed from the Arcade home page by selecting Help .

Settings

There are settings in Acer Arcade that allow you to fine-tune its performance to
suit your machine and your personal preferences. To access Settings, click on

this icon located on the upper-right hand corner of the main page.

Click Acer Arcade Help for comprehensive help on each Arcade mode.
In Display Settings:
Use the "Screen Ratio" option to choose between standard (4:3) or

widescreen (16:9) display when watching movies.
The "4:3 Movie Display Type" option allows you to select between

"CinemaVision

• Acer CinemaVision

produces minimal distortion in the center of the picture.

• The Letterbox option displays widescreen movie content in its original

aspect ratio and adds black bars at the top and bottom of the screen.

"Color profile" allows you to choose between "Original" or "ClearVision

• Acer ClearVision

content and dynamically adjusts the brightness/contrast/saturation levels
so that you do not need to change the color settings if the movie you are
watching contains scenes that are overly dark or too bright.

™

" or "Letterbox" mode.

™

is a nonlinear video stretching technology that

™

is a video enhancement technology that detects video

™

."

English

English

52

In Audio Settings:
Use "Speaker Environment" to choose between "Headphones," "SPDIF," "2" or

more speakers depending on your audio equipment.
"Output Mode" should be set to "Stereo" if you are listening to speakers,

"Dolby Surround," or "Virtual Surround Sound" if you are using headphones.

Note: If your speakers are not capable of outputting
low-frequency signals, it is recommended that you do not select
Virtual Surround Sound, in order to avoid damaging your
speakers.

Click Run Setup Wizard to change your original startup settings.
Click About Acer Arcade to open a page with version and copyright

information.
Click Restore Default Settings to return the Acer Arcade settings to their

default values.

Arcade controls

When watching video clips, movies or slide shows at full screen, two pop-up
control panels are shown when you move the pointer. They automatically
disappear after several seconds. The "Navigation Controls" panel appears at the
top and the "Player Controls" panel appears at the bottom of the screen.

Navigation controls

To return to the Arcade home page, click the Home button in the upper-left
corner of the window. To go up one folder level while searching for content,
click Up one level. To return to the previous screen, click the red arrow. The
buttons in the upper right (minimize, maximize, close) have standard PC
behaviors.

To quit Arcade, click the Close button in the upper right corner of the window.

Player controls

At the bottom of the window, the player controls — used for video, slide shows,
movies and music — are shown. The group on the left provides standard
playback controls (play, pause, stop, etc.). The group on the right controls
volume (mute and volume up/down).

53

Note: When playing DVDs, there are additional controls added to
the right of the volume controls. These are discussed in more
detail in the Cinema section of this guide.

Virtual keyboard

Whenever you are required to enter search information, or name a file, DVD or
folder, you can use the onscreen virtual keyboard. You can quickly enter the
information you need using the mouse, cursor keys or keyboard.

English

Background mode

With Acer Arcade you can continue listening to music while you perform certain
other functions. Video and music will continue playing in a small window
located in the bottom left-hand corner of the screen.

You can press the stop button on the remote or click the onscreen stop icon to
stop the playback at anytime.

English

54

Cinema

If your computer came with a DVD drive, you can play movies from DVDs and
video CDs (VCDs) with the Cinema function of Acer Arcade. This player has the
features and controls of a typical DVD player.

When you insert a disk into the DVD drive, the movie begins playing
automatically. To control the movie, the pop-up player control panel appears at
the bottom of the window when you move the pointer.

If more than one optical drive contains a playable disk, click the Cinema button
on the Home page to open the Cinema content page, then select the disk you'd
like to watch from the list on the right.

When viewing DVDs, the following special controls are added to the pop-up
panel:

• DVD Menu

• Subtitles

• Language

• Snapshot

• Angle

The disk currently playing will be shown in the area above the list of drives. This
page is also displayed when you press the Stop button during a movie. The
buttons on the left side allow you to resume the movie from the point it was
stopped, restart the movie from the beginning, jump to the DVD menu, eject
the disk, or go to the "DVD Settings" page.

Settings

To access the settings for Cinema, first click the "Settings" button on the main
menu, and then click on Cinema. This allows you to change "Video" and
"Language"settings.

The "Settings" control the audio and subtitle output of DVDs.
"Subtitles" selects the default subtitle language for DVDs when available. The

factory setting is "Off."
"Closed Captions" turns on the closed captions on DVDs. This function displays

captions encoded in the video signal that describe onscreen action and dialog
for the hearing impaired. The factory setting is "Off."

"Audio" selects the default language for DVD titles.
"Display Upon Mute" lets you choose whether to turn on the subtitles or

captions when you mute the sound for any reason.

55

Album

Acer Arcade lets you view digital photos individually or as a slide show, from
any available drive on your computer. Click the Album button on the Arcade
Home page to show the Album main page.

The content area on the right shows both individual pictures and folders.
Click on a folder to open it.

To view a slide show, open the folder containing the pictures you wish to view,
then click Play Slide Show. The slide show is played at full screen. Use the
pop-up control panel to control the slide show.

You can also view a single picture by clicking on it. This opens the picture at
full screen.

You can then use the onscreen player controls to zoom in and out, and to pan
in four directions.

English

Editing Pictures

Choose "Edit," and you can "Rotate," "Remove Red Eye," and "Auto Fix"
(optimize the brightness and contrast) pictures to improve the appearance of
your images.

Slide Show settings

To change Slide Show settings, click the Advanced button on the Album page
and select "Settings."

"Slide Duration" determines how long each slide is shown before automatically
advancing to the next picture in the slide show.

"Slide Show Transition" sets the style of transition used between pictures; you
can choose between Motion, Cell, Fade, Random, Wipe, Slide, Page and None
modes.

English

56

To add background music to a slide show, click on the "Slide Show Music"
option. The Slide Show Music page will ask you to choose music from your
personal music library.

Click Load Default Settings to return your settings to their default values.

Video

To open the Video function, click Video on the Arcade Home page.

Note: The Video feature is designed to play back many different
kinds of video formats. Refer to the Video help section for a full
list of compatible formats. If you want to watch a DVD or VCD, use
the "Cinema" function.

Playing a video file

Click Play to watch video files. The Video page shows the video files in the
content area on the right side. They are organized by folders and a thumbnail
image shows the first frame of each video.

To play a video file, click on it. The video will play at full screen. The pop-up
control panel will appear at the bottom of the screen when you move the
mouse. To return to the Video page, click Stop.

Snapshot

Snapshot mode is available in Cinema and Video modes. This function can be
used to capture the onscreen image at any time.

A single frame image will be captured and stored in a user designated directory.
The destination directory can be changed from the "Settings"menu.

Editing video

Acer Arcade offers the capability to edit captured video clips, photos and
footage from a camcorder into a movie. You can also select a movie style, and
add special transition effects and music to create the perfect home movie.

To edit a movie, click Advanced, and then select "Edit Video." Then select the
clips you wish to edit from your folders. To complete your movie, you may also
choose a "Movie Style," "Background Music," the perfect ratio of music and
audio, as well as the length of the movie.

"Select Scenes" can be used to include your favorite or the most important
scenes, or the editing decisions can be left to the editing program.

Once compiled, the final movie can then be burned to disk to share with family
and friends.

Note: For more details on editing video and all the associated
features, please refer to the Acer Arcade help menu.

Music

For convenient access to your music collection, click Music on the Arcade
homepage to open the Music homepage.

Select the folder, CD or category that contains the music you want to listen to.
Click Play to listen to the entire content from the beginning, or select the song
that you want to hear from the list in the content area.

The songs in the folder are shown in the content area, while the left side has
controls for "Play," "Shuffle" and "Repeat All." The "Visualize" option allows
you to watch computer-generated visuals while you listen to music. When
playing music, the control panel at the bottom of the page makes it easy to
adjust the volume and control playback.

To rip music from an audio CD, after you have inserted the CD, click Rip CD. In
the page that opens, select the songs you would like to rip (or click Select or
Clear All), then click Start Ripping.

The progress of the ripping operation will be displayed on screen.
You can change the file quality of the ripped tracks by clicking Settings.

57

English

Make DVDs

Acer Arcade provides an easy and complete solution for recording data, audio,
photos or videos. You can burn and share any combination of data, music,
photos or videos onto a CD or DVD — direct from Make DVD mode or some of
the other Acer Arcade media modes.

Authoring CD/DVDs

With Acer Arcade it is possible to create CD or DVDs directly from the main
menu, or from whichever media mode you may be using. The burn DVD option
can be found in the "Advanced" or "Main" menu of Video, Album and Music
media modes.

You can burn your favorite songs to a CD or convert songs from your music
collection to MP3 and other popular audio formats. You can even create MP3
CDs with over 100 of your favorite songs and listen to them on your PC or MP3
CD player.

With Arcade, you can also turn digital photos into a slide show with
background music, or film clips into an amateur movie. You can share any event
with your friends and family for playback on most DVD players. You can even
add customized theme menus and menu music.

English

58

It is also possible to burn combo CD/DVDs with music, photos, and film all in
one. The possibilities are endless!

For specific details about each of these options, click the Help button to open
the Arcade help menu.

File type compatibility

For details on file compatibility, please refer to the first page of the Arcade
online help menu for each media mode.

59

Taking your notebook PC with you

This section gives you tips and hints to consider when moving around or
traveling with your computer.

Disconnecting from the desktop

Follow these steps to disconnect your computer from external accessories:

1 Save any open files.
2 Remove any media, floppy disks or compact disks from the drive(s).
3 Shut down the computer.
4 Close the display cover.
5 Disconnect the cord from the AC adapter.
6 Disconnect the keyboard, pointing device, printer, external monitor and

other external devices.

7 Disconnect the Kensington lock if you are using one to secure the

computer.

Moving around

When you are just moving within short distances, for example, from your office
desk to a meeting room.

English

Preparing the computer

Before moving the computer, close and latch the display cover to place it in
Sleep mode. You can now safely take the computer anywhere you go within
the building. To bring the computer out of Sleep mode, open the display; then
press and release the power button.

If you are taking the computer to a client's office or a different building, you
may choose to shut down the computer:

Click on Start, Turn Off Computer, then click on Turn Off (Windows XP).

Or:

You can put the computer in Sleep mode by pressing <Fn> + <F4>. Then close
and latch the display.

When you are ready to use the computer again, unlatch and open the display;
then press and release the power button.

English

60

Note: If the Sleep indicator is off, the computer has entered
Hibernation mode and is turned off. If the power indicator is off
but the Sleep indicator is on, the computer has entered Sleep
mode. In both cases, press and release the power button to turn
the computer back on. Note that the computer may enter
Hibernation mode after being in Sleep mode for a period of time.

What to bring to meetings

If your meeting is relatively short, you probably do not need to bring anything
with you other than your computer. If your meeting will be longer, or if your
battery is not fully charged, you may want to bring the AC adapter with you to
plug in your computer in the meeting room.

If the meeting room does not have an electrical outlet, reduce the drain on the
battery by putting the computer in Sleep mode. Press <Fn> + <F4> or close the
display cover whenever you are not actively using the computer. To resume,
open the display (if closed), then press and release the power button.

Taking the computer home

When you are moving from your office to your home or vice versa.

Preparing the computer

After disconnecting the computer from your desktop, follow these steps to
prepare the computer for the trip home:

• Check that you have removed all media and compact disks from the

drive(s). Failure to remove the media can damage the drive head.

• Pack the computer in a protective case that can prevent the computer from

sliding around and cushion it if it should fall.

Caution: Avoid packing items next to the top cover of the
computer. Pressure against the top cover can damage the screen.

What to take with you

Unless you have some items at home, take the following items with you:

• AC adapter and power cord

• The printed User's Guide

61

Special considerations

Follow these guidelines to protect your computer while traveling to and
from work:

• Minimize the effects of temperature changes by keeping the computer

with you.

• If you need to stop for an extended period of time and cannot carry the

computer with you, leave the computer in the trunk of the car to avoid
exposing the computer to excessive heat.

• Changes in temperature and humidity can cause condensation. Allow the

computer to return to room temperature, and inspect the screen for
condensation before turning on the computer. If the temperature change
is greater than 10 °C (18 °F), allow the computer to come to room
temperature slowly. If possible, leave the computer for 30 minutes in an
environment with a temperature between outside and room temperature.

Setting up a home office

If you frequently work on your computer at home, you may want to purchase a
second AC adapter for use at home. With a second AC adapter, you can avoid
carrying the extra weight to and from home.

If you use your computer at home for significant periods of time, you might also
want to add an external keyboard, monitor or mouse.

Traveling with the computer

English

When you are moving within a larger distance, for instance, from your office
building to a client's office building or traveling locally.

Preparing the computer

Prepare the computer as if you were taking it home. Make sure that the battery
in the computer is charged. Airport security may require you to turn on your
computer when carrying it into the gate area.

What to take with you

Take the following items with you:

• AC adapter

• Spare, fully-charged battery pack(s)

• Additional printer driver files if you plan to use another printer

English

62

Special considerations

In addition to the guidelines for taking the computer home, follow these
guidelines to protect your computer while traveling:

• Always take the computer as carry-on luggage.

• If possible, have the computer inspected by hand. Airport security X-ray

machines are safe, but do not put the computer through a metal detector.

• Avoid exposing floppy disks to hand-held metal detectors.

Traveling internationally with the computer

When you are moving from country to country.

Preparing the computer

Prepare the computer as you would normally prepare it for traveling.

What to bring with you

Bring the following items with you:

• AC adapter

• Power cords that are appropriate for the country to which you

are traveling

• Spare, fully-charged battery packs

• Additional printer driver files if you plan to use another printer

• Proof of purchase, in case you need to show it to customs officials

• International Travelers Warranty passport

Special considerations

Follow the same special considerations as when traveling with the computer. In
addition, these tips are useful when traveling internationally:

• When traveling in another country, check that the local AC voltage and the

AC adapter power cord specifications are compatible. If not, purchase a

power cord that is compatible with the local AC voltage. Do not use

converter kits sold for appliances to power the computer.

• If you are using the modem, check if the modem and connector is

compatible with the telecommunications system of the country you are

traveling in.

63

Securing your computer

Your computer is a valuable investment that you need to take care of. Learn
how to protect and take care of your computer.

Security features include hardware and software locks — a security notch
and passwords.

Using a computer security lock

The notebook comes with a Kensington-compatible security slot for a security
lock.

Wrap a computer security lock cable around an immovable object such as a
table or handle of a locked drawer. Insert the lock into the notch and turn the
key to secure the lock. Some keyless models are also available.

Using passwords

Passwords protect your computer from unauthorized access. Setting these
passwords creates several different levels of protection for your computer
and data:

• Supervisor Password prevents unauthorized entry into the BIOS utility.

Once set, you must enter this password to gain access to the BIOS utility.
See "BIOS utility" on page 68.

• User Password secures your computer against unauthorized use. Combine

the use of this password with password checkpoints on boot-up and
resume from Hibernation for maximum security.

• Password on Boot secures your computer against unauthorized use.

Combine the use of this password with password checkpoints on boot-up
and resume from Hibernation for maximum security.

English

Important! Do not forget your Supervisor Password! If you forget
your password, please get in touch with your dealer or an
authorized service center.

English

64

Entering passwords

When a password is set, a password prompt appears in the center of the
display screen.

• When the Supervisor Password is set, a prompt appears when you press

<F2> to enter the BIOS utility at boot-up.

• Type the Supervisor Password and press <Enter> to access the BIOS utility.

If you enter the password incorrectly, a warning message appears. Try

again and press <Enter>.

• When the User Password is set and the password on boot parameter is

enabled, a prompt appears at boot-up.

• Type the User Password and press <Enter> to use the computer. If you

enter the password incorrectly, a warning message appears. Try again and

press <Enter>.

Important! You have three chances to enter a password. If you fail
to enter the password correctly after three tries, the system halts.
Press and hold the power button for four seconds to shut down
the computer. Then turn on the computer again, and try again.

Setting passwords

You can set passwords using the BIOS utility.

65

Expanding through options

Your notebook PC offers you a complete mobile computing experience.

Connectivity options

Ports allow you to connect peripheral devices to your computer as you would
with a desktop PC. For instructions on how to connect different external devices
to the computer, read the following section.

Fax/data modem

Your computer has a built-in V.92 56 Kbps fax/data modem.

Warning! This modem port is not compatible with digital phone
lines. Plugging this modem into a digital phone line will damage
the modem.

To use the fax/data modem port, connect a phone cable from the modem port
to a telephone jack.

English

Warning! Please make sure that the cable you use is appropriate
for the country in which you are working.

English

66

Built-in network feature

The built-in network feature allows you to connect your computer to an
Ethernet-based network.

To use the network feature, connect an Ethernet cable from the Ethernet
(RJ-45) port on the chassis of the computer to a network jack or hub on
your network.

Universal Serial Bus (USB)

The USB 2.0 port is a high-speed serial bus which allows you to connect USB
peripherals without taking up precious system resources.

67

PC Card slot

The Type II PC Card slot of the computer accepts PC Cards that enhance the
usability and expandability of the computer. These cards should have a PC Card
logo on them.

PC Cards (formerly PCMCIA) are add-on cards for portable computers, giving
you expansion possibilities long afforded by desktop PCs. Popular PC Cards
include flash, fax/data modem, wireless LAN and SCSI cards. CardBus improves
on the 16-bit PC card technology by expanding the bandwidth to 32 bits.

Note: Refer to your card's manual for details on how to install and
use the card, and its functions.

Inserting a PC Card

Insert the card into the slot and make the proper connections (e.g., network
cable), if necessary. See your card manual for details.

English

Ejecting a PC Card

Before ejecting a PC Card:

1 Exit the application using the card.
2 Left-click on the PC Card icon on the taskbar and stop the card operation.
3 Press the slot eject button to pop out the eject button; then press it again

to eject the card.

English

68

Installing memory

Follow these steps to install memory:

1 Turn off the computer, unplug the AC adapter (if connected) and remove

the battery pack. Then turn the computer over to access its base.
2 Remove the screws from the memory cover; then lift up and remove the

memory cover.
3 (a) Insert the memory module diagonally into the slot, then (b) gently press

it down until it clicks into place.

4 Replace the memory cover and secure it with the screw.
5 Reinstall the battery pack, and reconnect the AC adapter.
6 Turn on the computer.

The computer automatically detects and reconfigures the total memory size.
Please consult a qualified technician or contact your local Acer dealer.

BIOS utility

The BIOS utility is a hardware configuration program built into your
computer's BIOS.

Your computer is already properly configured and optimized, and you do not
need to run this utility. However, if you encounter configuration problems, you
may need to run it.

To activate the BIOS utility, press <F2> during the POST; while the notebook PC
logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
Boot from the categories listed at the top of the screen.

69

Enable disk-to-disk recovery

To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,
then select Main from the categories listed at the top of the screen. Find D2D
Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this
value to Enabled.

Password

To set a password on boot, activate the BIOS utility, then select Security from
the categories listed at the top of the screen. Find Password on boot: and use
the <F5> and <F6> keys to enable this feature.

Using software

Playing DVD movies

When the DVD drive module is installed in the optical drive bay, you can play
DVD movies on your computer.

1 Eject the DVD tray and insert a DVD movie disk; then close the DVD tray.

Important! When you launch the DVD player for the first time, the
program asks you to enter the region code. DVD disks are divided
into 6 regions. Once your DVD drive is set to a region code, it will
play DVD disks of that region only. You can set the region code a
maximum of five times (including the first time), after which the
last region code set will remain permanent. Recovering your hard
disk does not reset the number of times the region code has been
set. Refer to the table below for DVD movie region code
information.

2 The DVD movie will automatically play after a few seconds.

English

Region code Country or region
1 USA, Canada
2 Europe, Middle East, South Africa, Japan
3 Southeast Asia, Taiwan, South Korea
4 Latin America, Australia, New Zealand
5 Former USSR, parts of Africa, India
6 People's Republic of China

Note: To change the region code, insert a DVD movie of a
different region into the DVD drive. Please refer to the online
help for more information.

70

Power management

English

This computer has a built-in power management unit that monitors system
activity. System activity refers to any activity involving one or more of the
following devices: keyboard, mouse, hard disk, peripherals connected to the
computer, and video memory. If no activity is detected for a period of time
(called an inactivity timeout), the computer stops some or all of these devices in
order to conserve energy.

This computer employs a power management scheme that supports the
advanced configuration and power interface (ACPI), which allows for maximum
power conservation and maximum performance at the same time. Windows
handles all power-saving chores for your computer.

Acer eRecovery Management

Acer eRecovery Management is a tool to quickly backup and restore the system.
You can create and save a backup of the current system configuration to hard
disk, CD or DVD.

Acer eRecovery Management consists of the following functions:
1 Create backup
2 Restore from backup
3 Create factory default image CD, or burn bundled software to an

application CD
4 Re-install bundled software without CD
5 Change Acer eRecovery Management password

This chapter will guide you through each process.

Note: This feature is only available on certain models. For systems
that do not have a built-in optical disk burner, plug in an external
USB or IEEE 1394-compatible optical disk burner before entering
Acer eRecovery Management for optical disk-related tasks.

Acer eRecovery Management requires a specific hard disk
partitioning structure to function. If the system detects that the
hard disk does not use this structure, Acer eRecovery Management
functionality will be disabled.

71

Create backup

You can create and save backup images to hard disk, CD or DVD.
1 Boot to Windows XP
2 Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery Management window, select Recovery settings and

click Next.

5 In the Recovery settings window, select Backup snapshot image and

click Next.

6 Select the backup method.

aUse Backup to HDD to store the backup disk image on drive D:.
b Backup to optical device to store the backup image on CD or DVD.

7 After choosing the backup method, click Next.

Follow the instructions on screen to complete the process.

Restore from backup

You can restore backups previously created (as stated in the Create backup
section) from hard disk, CD or DVD.

1 Boot to Windows XP.
2 Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery Management window, select Recovery actions and

click Next.

5 Select the desired restore action and follow the onscreen instructions to

complete the restore process.

English

Note: The "Restore C:" item is enabled only if there is a user
backup stored on the hard disk (D:\). Please refer to the Create
backup section.

72

Create factory default image CD

English

When the System CD and Recovery CD are not available, you can create them by
using this feature.

1 Boot to Windows XP.
2 Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery Management window, select Recovery settings and

click Next.
5 In the Recovery settings window, select Burn image to disk and click Next.
6 In the Burn image to disk window, select 1. Factory default image or

2. Application CD and click Next.

7 Follow the instructions on screen to complete the process.

Note: Select 1. Factory default image when you want to burn a
bootable disk that contains your computer's entire operating
system as it was delivered to you from the factory. If you wish to
have a disk that will allow you to browse the contents and install
selected drivers and applications, select 2. Application CD — this
disk will not be bootable.

Re-install bundled software without CD

Acer eRecovery Management stores pre-loaded software internally for easy
driver and application re-installation.

1 Boot to Windows XP.
2 Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery Management window, select Recovery actions and

click Next.
5 In the Recovery settings window, select Reinstall applications/drivers and

click Next.
6 Select the desired driver/application and follow the instructions on screen

to re-install.

At first launch, Acer eRecovery Management prepares all the needed software
and may take few seconds to bring up the software content window.

73

Change password

Acer eRecovery Management and Acer disk-to-disk recovery are protected by a
password that can be changed by the user. Follow the steps below to change
the password in Acer eRecovery Management.

1 Boot to Windows XP.
2 Press <Alt> + <F10> to open the Acer eRecovery Management utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery Management window, select Recovery settings and

click Next.

5 In the Recovery settings window, select Password: Change Acer eRecovery

Management password and click Next.

6 Follow the instructions on screen to complete the process.

Note: If the system crashes, and will not boot to Windows, you can
run Acer disk-to-disk recovery to restore the factory default image
under DOS mode.

English

74

Troubleshooting

English

This chapter shows you how to deal with common system problems.
Read it before calling a technician if a problem occurs. Solutions to more
serious problems require opening up the computer. Do not attempt to open
the computer yourself; contact your dealer or authorized service center
for assistance.

Troubleshooting tips

This notebook PC incorporates an advanced design that delivers onscreen error
message reports to help you solve problems.

If the system reports an error message or an error symptom occurs, see "Error
messages" below. If the problem cannot be resolved, contact your dealer. See
"Requesting service" on page 49.

Error messages

If you receive an error message, note the message and take the corrective
action. The following table lists the error messages in alphabetical order
together with the recommended course of action.

Error messages Corrective action

CMOS battery bad Contact your dealer or an authorized service center.

CMOS checksum error Contact your dealer or an authorized service center.

Disk boot failure Insert a system (bootable) disk into the floppy drive

(A:), then press <Enter> to reboot.

Equipment
configuration error

Hard disk 0 error Contact your dealer or an authorized service center.

Hard disk 0 extended
type error

I/O parity error Contact your dealer or an authorized service center.

Keyboard error or no
keyboard connected

Keyboard interface
error

Memory size mismatch Press <F2> (during POST) to enter the BIOS utility,

Press <F2> (during POST) to enter the BIOS utility,
then press Exit in the BIOS utility to reboot.

Contact your dealer or an authorized service center.

Contact your dealer or an authorized service center.

Contact your dealer or an authorized service center.

then press Exit in the BIOS utility to reboot.

75

If you still encounter problems after going through the corrective measures,
please contact your dealer or an authorized service center for assistance. Some
problems may be solved using the BIOS utility.

English

English

76

Regulations and safety notices

English

ENERGY STAR guidelines compliance

As an ENERGY STAR partner, Acer Inc. has determined that this product meets
the ENERGY STAR guidelines for energy efficiency.

FCC notice

This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.

Caution

Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this computer.

77

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.

Declaration of Conformity for EU countries

Hereby, Acer, declares that this notebook PC series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
(Please visit http://global.acer.com/products/notebook/reg-nb/index.htm
complete documents.)

Compliant with Russian regulatory certification

for

English

English

Modem notices

Notice for USA

This equipment complies with Part 68 of the FCC rules. Located on the modem is
a label that contains, among other information, the FCC Registration Number
and Ringer Equivalence Number (REN) for this equipment. Upon request, you
must provide this information to your telephone company.

If your telephone equipment causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If possible, they
will notify you in advance. But, if advance notice is not practical, you will be
notified as soon as possible. You will also be informed of your right to file a
complaint with the FCC.

English

78

Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.

If this equipment should fail to operate properly, disconnect the equipment
from the phone line to determine if it is causing the problem. If the problem is
with the equipment, discontinue use and contact your dealer or vendor.

Caution: To reduce the risk of fire, use only No. 26 AWG or larger
UL Listed or CSA Certified Telecommunication Line Cord.

TBR 21

This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for
single terminal connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional assurance of
successful operation on every PSTN termination point. In the event of problems,
you should contact your equipment supplier in the first instance.

List of applicable countries

EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in
the countries of European Union, as well as Norway, Switzerland, Iceland and
Liechtenstein. This device must be used in strict accordance with the regulations
and constraints in the country of use. For further information, please contact
local office in the country of use.

Notice for Australia

For safety reasons, only connect headsets with a telecommunications
compliance label. This includes customer equipment previously labelled
permitted or certified.

79

Notice for New Zealand

1 The grant of a Telepermit for any item of terminal equipment indicates

only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement of
the product by Telecom, nor does it provide any sort of warranty. Above
all, it provides no assurance that any item will work correctly in all respects
with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of
Telecom's network services.

2 This equipment is not capable, under all operating conditions, of correct

operation at the higher speeds for which it is designed. Telecom will accept
no responsibility should difficulties arise in such circumstances.

3 Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this
device. The associated equipment shall be set to operate within the
following limits for compliance with Telecom's Specifications:

a There shall be no more than 10 call attempts to the same number

within any 30 minute period for any single manual call initiation, and

b The equipment shall go on-hook for a period of not less than 30

seconds between the end of one attempt and the beginning of the
next call attempt.

4 Some parameters required for compliance with Telecom's Telepermit

requirements are dependent on the equipment (PC) associated with this
device. In order to operate within the limits for compliance with Telecom's
specifications, the associated equipment shall be set to ensure that
automatic calls to different numbers are spaced such that there is not less
than 5 seconds between the end of one call attempt and the beginning
of another.

5 This equipment shall not be set up to make automatic calls to Telecom's

111 Emergency Service.

6 This device is equipped with pulse dialing while the Telecom standard is

DTMF tone dialing. There is no guarantee that Telecom lines will always
continue to support pulse dialing.

7 Use of pulse dialing, when this equipment is connected to the same line as

other equipment, may give rise to bell tinkle or noise and may also cause a
false answer condition. Should such problems occur, the user should NOT
contact the telecom Fault Service.

8 This equipment may not provide for the effective hand-over of a call to

another device connected to the same line.

9 Under power failure conditions this appliance may not operate. Please

ensure that a separate telephone, not dependent on local power, is
available for emergency use.

English

English

English

80

Laser compliance statement

The CD or DVD drive used with this computer is a laser product.
The CD or DVD drive's classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE
TO BEAM.

APPAREIL A LASER DE CLASSE 1 PRODUIT
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.

LUOKAN 1 LASERLAITE LASER KLASSE 1
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
NICHT DEM STRAHLL AUSSETZEN

PRODUCTO LÁSER DE LA CLASE I
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE
A LOS RAYOS.

ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.

VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA
SÅTEESEENSTIRRA EJ IN I STRÅLEN

VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I
STRÅLEN

ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN

LCD pixel statement

The LCD unit is produced with high-precision manufacturing techniques.
Nevertheless, some pixels may occasionally misfire or appear as black or
red dots. This has no effect on the recorded image and does not constitute
a malfunction.

Macrovision copyright protection notice

This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.

81

Radio device regulatory notice

Note: Below regulatory information is for models with wireless
LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules). Below information is for products
with such devices.

European Union (EU)

This device complies with the essential requirements of the European Council
Directives listed below:

73/23/EEC Low Voltage Directive

• EN 60950-1
89/336/EEC Electromagnetic Compatibility (EMC) Directive

• EN 55022

• EN 55024

• EN 61000-3-2/-3

99/5/EC Radio & Telecommunications Terminal Equipment (R&TTE) Directive

• Art.3.1a) EN 60950-1

• Art.3.1b) EN 301 489 -1/-17

• Art.3.2) EN 300 328-2

• Art.3.2) EN 301 893 *applies to 5 GHz only

English

English

English

82

List of applicable countries

EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in
the countries of European Union, as well as Norway, Switzerland, Iceland and
Liechtenstein. This device must be used in strict accordance with the regulations
and constraints in the country of use. For further information, please contact
local office in the country of use.

The FCC RF safety requirement

The radiated output power of the wireless LAN Mini PCI Card/ Mini Card and
Bluetooth card is far below the FCC radio frequency exposure limits.
Nevertheless, the notebook PC series shall be used in such a manner that the
potential for human contact during normal operation is minimized as follows:

1 Users are requested to follow the RF safety instructions on wireless option

devices that are included in the user's manual of each RF option device.

Caution: To comply with FCC RF exposure compliance
requirements, a separation distance of at least 20 cm (8 inches)
must be maintained between the antenna for the integrated
wireless LAN Mini PCI Card/ Mini Card built in to the screen section
and all persons.

Note: The Acer wireless Mini PCI Card/ Mini Card adapter
implements a transmission diversity function. The function does
not emit radio frequencies simultaneously from both antennas.
One of the antennas is selected automatically or manually (by
users) to ensure good quality radiocommunication.

83

2 This device is restricted to indoor use due to its operation in the 5.15 to

5.25 GHz frequency range. FCC requires this product to be used indoors for
the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems.

3 High power radar are allocated as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/or damage this device.

4 An improper installation or unauthorized use may cause harmful

interference to radio communications. Also any tampering of the internal
antenna will void the FCC certification and your warranty.

Canada — Low-power license-exempt radio
communication devices (RSS-210)

a Common information

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference
that may cause undesired operation of the device.

b Operation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.

c Operation in 5 GHz band

• The device for the band 5150-5250 MHz is only for indoor usage to reduce

potential for harmful interference to co-channel Mobile Satellite systems.

• High power radars are allocated as primary users (meaning they have

priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could
cause interference and/or damage to LELAN (Licence-Exempt Local Area
Network) devices.

English

English

English

84

Federal Communications Comission

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.

The following local manufacturer/importer is responsible for this declaration:

Product name: Notebook PC

Model number: MS2195

Machine type: Aspire 9410/7110

SKU number: Aspire 941xxx/711xxx

("x" = 0 - 9, a - z, or A - Z)

Name of responsible party: Acer America Corporation

Address of responsible party: 2641 Orchard Parkway

Contact person: Mr. Young Kim

Tel: [phone]

Fax: [phone]

San Jose, CA 95134
USA

85

Declaration of Conformity for CE Marking

Name of manufacturer: Beijing Acer Information Co., Ltd.
Address of

manufacturer:
Contact person: Mr. Easy Lai
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Declares that product: Notebook PC
Trade name: Acer
Model number: MS2195
Machine type: Aspire 9410/7110
SKU number: Aspire 941xxx/711xxx ("x" = 0 - 9, a - z, or A - Z)

Is in compliance with the essential requirements and other relevant provisions
of the following EC directives.

Reference no. Title

89/336/EEC Electromagnetic Compatibility (EMC directive)

73/23/EEC Low Voltage Directive (LVD)

Huade Building, No.18, ChuangYe Rd.
ShangDi Zone, HaiDian District Beijing PRCE marking

English

English

1999/5/EC Radio & Telecommunications Terminal Equipment

The product specified above was tested conforming to the applicable Rules
under the most accurate measurement standards possible, and all the necessary
steps have been taken and are in force to assure that production units of the
same product will continue to comply with these requirements.

Easy Lai, Director Date
Regulation Center
Environment & Safety

Directive (R&TTE)

02/2006

86

LCD panel ergonomic specifications

English

Design viewing distance 500 mm
Design inclination angle 0.0°
Design azimuth angle 90.0°
Viewing direction range class Class IV
Screen tilt angle 85.0°
Design screen illuminance • Illuminance level:

α)] lx where α = 85°

• Color: Source D65

Reflection class of LCD panel
(positive and negative polarity)

Image polarity Both
Reference white:

Pre-setting of luminance and
color temperature @ 6500K
(tested under BM7)

Pixel fault class Class II

• Ordinary LCD: Class I

• Protective or Acer CrystalBrite

• Yn

• u'n

• v'n

[250 + (250cos

Class III

™

LCD: