Acer 65PE User Manual
Digital Multimedia Projector
PalmPro 7763P/65PE
OPERATING GUIDE
Thank you very much for purchasing this Acer DLP™ Technology Projector.
Please read this operating guide to ensure correct use of the device.
manual, keep it for future reference.
Outline
This DLP™ Technology Projector can display
various computer signals and NTSC/PAL/SECAM
video signals.
Features
(1) High brightness
(2) High resolution
After reading this
(3) Compact size, light weight for portability
(4) RGB output terminal
(5) RS232 Communication
(6) Mouse emulation
(7) Complies with VESA DDC1/2B specifications
English I
Copyright
Copyright © 2000 by this company. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system or
translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without
the prior written permission of this company.
Disclaimer
This company makes no representations or warranties, either expressed or implied,
with respect to the contents hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Further, this company
reserves the right to revise this publication and to make changes from time to time
in the contents hereof without obligation of this company to notify any person of
such revision or changes.
Fill this in!!
For the convenience of service, record the following
information in the space below. The serial number is
on the back of the product.
Monitor Information
Product
Name:
Serial
Number:
Date of
Purchase:
7763P/65PE
Dealer Information
Dealer:
Telephone
Number:
Address:
Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. AND PLEASE READ ALL OF THESE
INSTRUCTIONS BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE .
Safety Instructions
1. Read all of these instructions before you operate your projector and save for
future reference.
2. The lamp becomes extremely hot during operation. Allow the projector to cool
for approximately 45 minutes prior to removing the lamp assembly for
replacement. Do not operate lamps beyond the rated lamp life. Excessive
operation of lamps beyond rated life could cause them to explode in rare
occasions.
3. Power is still available when the projector is in the standby mode. Never
replace lamp assembly or any electronic components unless the projector is
unplugged.
4. Do not attempt to service this product yourself, as opening or removing covers
may damage the components inside and will void your warranty.
English II
5. Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
6. The Standard Remote Control contains a low-power laser that acts as a pointing
device during presentations. The light beam may cause injury if pointed
directly into a person’s eyes.
7. This product is capable of displaying inverted images for ceiling mount
configurations. Please use suitable equipment for mounting the unit and make
sure it is securely installed.
8. Openings in front or at two sides are for ventilation. They must not be blocked
or covered.
9. For ventilation reasons, the fan continues to operate for about 2 minutes after
the projector has been powered off. Please do not unplug the power cord until
the fan stops.
10. Do not look straight at the projector lens during operation. The intense light
beam may injure your eyes.
English III
Table of Contents
Introduction .......................................... 1
Projector Features ............................... 1
Description ....................................... 2
A FRONT (figure) .............................. 2
B REAR (figure) ............................... 2
C BOTTOM (figure) ............................. 3
Installation ...................................... 3
A. Positioning ............................. 3
B. Adjustable Feet ........................ 4
Moving the Projector .............................. 4
Accessories ....................................... 5
Connection ............................................ 7
A Connecting the Projector to Computer/Notebook 7
B Connecting the Projector to Macintosh/Power Book 8
Operation ............................................. 9
Turn On/Off Procedure ............................. 9
A Power on .................................... 9
B Standby ..................................... 9
External Control .................................. 9
A Control Pad ............................ 9
B Remote Control ........................ 11
Usage and Replacement of Lamp .................... 12
A Lamp/temperature Status LED Indicator ...... 13
B Replacing the Lamp ......................... 14
OSD .............................................. 17
Main OSD Menu .................................... 17
A Display Page .......................... 18
B Image Page ............................ 19
C Control Page ........................... 20
D Source Page ............................ 21
Other Correspondent Remote Functions and Messages 22
Maintenance and Troubleshooting ...................... 24
A Lamp Replacement ....................... 24
B Cleaning the Lens ...................... 24
C Troubleshooting ......................... 24
Specifications ....................................... 26
A Optical ................................ 26
B Electrical ............................. 26
C Mechanical .............................. 26
D Preset Display Resolution Table ......... 27
Appendix ............................................. 28
AV Connection Port ............................... 28
AV Control Pad ................................... 28
A Connecting the Box ..................... 29
English IV
Introduction
Projector Features
A
Image Resolution
Fully compatible with true SVGA(63P)/XGA(65PE), and supports SXGA
using advanced intelligent compression technology. The advanced
intelligent compression technology enables it to present clear
compression SVGA/XGA images without line omission.
B
Brightness
Provides superior brightness of 700 ANSI lumens using TI’s Digital
Micromirror Device (DMD) and our own optical design, with a geometric
effect that increases light usage efficiency. By increasing the light
usage efficiency we can better reproduce the three basic colors (RGB)
required for color reproduction on a single DMD.
C
Portability
1
This projector has a sophisticated shape, like that of an attaché
case, with a retractable carrying handle that is extremely compact
and lightweight. It helps you make powerful presentations wherever
you go with its 5-pound weight and B5 size.
D
Keystone
The projection position is already set to the height of the line of
vision; there is no keystone effect. Even when projecting above or
under the height of the line of vision, image distortion (if any) can
be adjusted using the keystone correction function.
E
Multilanguage
The OSD (On Screen Display: information screens and menus) in 7
languages (English, Deutsch, Français, Italiano, Español, Swedish and
Dutch) provides you with additional information to help you make
corrections with OSD operation in your native languages.
F
Auto Detect System
This projector can detect display signals from PCs with frequently
used timing and do the optimization simultaneously. It does not
require complicated adjustments in order to project picture images
from PCs.
English 1
G
Ceiling Mount and Rear Screen Projection
The projector is equipped with a full mirror scan conversion function
(vertical/horizontal mirror), which allows the image to be reversed
for ceiling mounting as well as for rear projection applications.
H
AV box
An AV box is optional, and users can attach one or two to the
projector. Additionally, our AV box video standard is compatible with
NTSC
U.S. and Canada standard
PAL
Western Europe standard
SECAM France and Eastern
Europe standard
NTSC4.43 Middle East standard
If users want to watch CATV, AV box will serve the need.
Description
A
FRONT (figure)
Figure 1 Front view of 7763P/ 65PE
B REAR (figure)
English 2
Figure 2 Rear view of 7763P/65PE
C BOTTOM (figure)
Figure 3 Bottom view of 7763P/65PE
Installation
A.
Positioning
•
This projector is basically designed to project on a flat
projection surface.
•
This projector can be focused from 1.5m–14m.
•
Refer to the figure below to adjust the screen size.
English 3
Figure 4 Positioning of 7763P/65PE
B. Adjustable Feet
Picture tilt and projection angle can be adjusted by twisting
Adjustable Feet. Projection angle can be adjusted 2° to 8.5° degrees
by rotating Adjustable Feet.
Figure 5 Adjustable feet
Moving the Projector
Use the carrying handle when moving the projector.
Replace the lens cover and rotate the feet fully clockwise (to
shorten the feet) when moving the projector to prevent damage to the
projector.
Caution
The carry bag (supplied) is intended to protect the projector from dust and
scratches on the surface of the cabinet. It is not designed to protect the
projector from external shock.
Do not transport the projector in an unsuitable transport case by using a courier
or transport service. This may cause damage to the projector.
English 4
Figure 6 Moving the projector
Accessories
Please check and make sure your box contains everything listed below.
If any pieces are missing, contact your dealer.
Please save the original box and packing materials in case you ever
need to ship the unit.
English 5
Figure 7 Accessories of 7763P/65PE
English 6
Loading...