ACE BACKSTAGE 154SLBK User Manual

ACE BACKSTAGE CO., INC.

Partnering with

to support

opticalCON

ACE BACKSTAGE CO., INC.

2

MX1

D

M

CO

R

CLEA

USH

P

H
US
P

STAGE POCKET SYSTEMS

24846 Avenue Rockefeller • Suite 200 • Valencia, CA 91355 • Telephone: [phone] • Fax: [phone] • Web: www.acebackstage.com

154SLBK STAGE POCKET - FOR USE WITH opticalCON

Extra clearance
to eliminate
strain on cable

10.5”

6”

18.5”

FOR BELOW SURFACE FLOOR - PERMANENT INSTALLATION

CONNECTRIX

CONNECTRIX Connectors utilize the popular mounting

pattern of Neutrik¨ Ò DÓ Series connectors on CONNECTRIX
Panels. The CONNEC TRIX System allows the placement of
any CONNECTRIX Connector into on of many CONNECTRIX Panels to
provide ground isolation and a custom panel result with off-the-shelf
prices and delivery. See all CONNECTRIX Panels and Connectors on

our website at www.acebackstage.com.

SYSTEM PANELS & CONNECTORS

SUPPORT

The ACE Backstage 154-SL-BK Stage Pocket supports
the ANSI recommended bend radius for fiber optic,
digital, and control cable reducing mechanical
destruction as well as minimizing microbending and
macrobending losses. Large sized panel mount
connectors sit at a 70* angle giving ample behind panel
termination clearance, as well as allowing room for
cable-end receptacles. Specialty cables exit the pocket
without bending, eli

The generous Panel Bracket Assembly allows
connectivity possibilities for up to 6 fiber optic, audio, or
video connectors as well as one single gang A/C
receptical located opposite the isolated raceway divider.

The basic construction incorporates 3 sub -assemblies:

#1. BACK BOX Ð Welded 14 ga. steel, dipped in zinc

corrosion retardant and polyurethane sealed. The 6Ó
depth allows for work clearance behind the panel

Punched and sealed combination knockouts are

bracket.
positioned (2) places and (1) place typical on opposing
sides. Electrical raceway compartment has ample
clearance for installer to punch additional knockouts as
needed.

#2. PANEL BRACKET ASSEMBLY Ð Made from 18 ga.
steel with electrostatic applied powder coat finish, this 3
piece assembly can be installed before or after back box
installation.

#3. LID/ BEZEL Ð Heavy duty welded
11 ga steel bezel, finished in texturized, professional
grade, black powder coat. A unique assembly with spring
loaded hinge pins and hinged cableway slot closure that
mounts directly to the back box. Standard flush lid or
optional locking lid is available.

minating strain.

10 ga. steel lid and

#WP-305 #WP-300 #WP-306 #WP-308 #DB #DC

#C-15136 #C-15142 #C-25130 #C-25143#C-15100 #C-15133#C-15111 #C-15112

Download spec info at

acebackstage.com