Vision Touch combi sTeam oVen
6 GN 2/3 Size PaNS Tray CaPaCiTy— eleCTriC uNiT
Boiler-Free
Project: ___________________________________ Location: ___________________________________ Item #: ___________________________________ Quantity:___________
Standard Features
• Constructed of heavy gauge #304
Stainless Steel
• ECO logic energy saving and monitoring
system
• Touch Screen controls
• Instantaneous steam generation within
oven cavity
• Tempered dual pane, curved glass door
for better viewing
• Low temperature and superheated (86° to
266°F) steam generation
• Auto-reversing fan for a perfectly even
bake
• Automatic oven cool down
• Electronic self-diagnosis with malfunction
alarms for key operating areas
• Automatic pre-heat function
• Tamper proof cooking program protection
• Two step Safety door handle
• Door has half and full position stop safety
positions
• Integrated stainless steel door drip tray
• Hand shower
• USB port for uploading and downloading
data
• LAN interface connection
• HACCP data tracking
• Magnetic door switch to energize oven
• Easy to operate controls, intuitive
• Automatic cleaning system sanitizing
system
• 1000 cooking programs with up to 20 steps
per program - custom program naming
• Vision Agent virtual Help button will
answer any questions about any cooking
procedures or even functions
• Multipoint cooking probe
• Oven has Low Temperature, Banqueting,
Delta T, Cook & Hold, Retherm and
Proofing presets
• 5 speed fan for multiple purpose cooking/
baking
• Delayed Start, delayed cleaning timers
• The Multi-Timer allows for individual
timing for each shelf in the oven when
batch cooking
• Pan capacity - 6 - GN 2/3 size pans
Short Spec
Combi steam oven shall be AccuTemp’s
T623E Vision Touch Series. Super-efficient
boilerless steam injection system that uses a
reversing air dispersal fan.
With the Vision Touch controls the MultiTimer feature allows the operator to set
up Six different menu items in advance
for continuous batch cooking. Automatic
cleaning system which initiates automatic
cool-down whenever a cleaning cycle is
started.
#304 Stainless steel exterior with #304
Stainless steel interior.
T623E Model shown
Other Approvals
Accessories & Options
Accessories for every kitchen, contact
your AccuTemp representative for more
information.
• Full line of pans available, see seperate
Accessories List
• Stacking Kit for T623E models only
• Wall Mounting Kit
• KD Stainless steel stand
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
MM6910-1605
Vision Touch combi sTeam oVen
6 GN 2/3 Size PaNS Tray CaPaCiTy— eleCTriC uNiT
Boiler-Free
Combi Oven Model “T623E” Specifications
Model #
T623E
It is the sole responsibility of the owner/operator/purchaser of this equipment to verify that the incoming water supply is comprehensively tested and if
required, a means of “water treatment” provided that would meet compliance requirements with the published water quality standards published below.
Non-compliance with these minimum standards will potentially damage this equipment and/or components and VOID the original equipment manufacturer’s
warranty.
TWO (2) TOTAL COLD WATER INLETS -Drinking Quality
ONE (1) TREATED WATER INLET: 3/4” NPT
ONE (1) UNTREATED WATER INLET: 3/4” NPT
WATER DRAIN: 1 1/2” (40mm) Connection with a 2”minimum air
gap installed as close to the oven as possible.
Shipping
Weight
167 LB
76 Kg
AMPS PER LINE
kW Phase 208V 240V 480V
4.1
4.1
5.4
5.4
5
Inlet Pressure PSI 30 - 60
Chlorine ppm < 0.01
Chloramine ppm < 0.01
pH Level pH 6.8 - 8.5
TDS mg/L 150
Water Hardness mg/L 86
1 19.7 - -
3 11.4 - -
1 - 22.5 -
3 - 13.1 -
3 - - 6
Alkalinity (as CaCO3) PPM 70
Sulfates mg/L < 40
Chlorides mg/L < 30
Silica mg/L < 15
Iron mg/L < 0.1
A - Air Intake
B - Exhaust
C - Drain
E - Electrical Connection
V1 - Unfiltered Water
V2 - Filtered Water
AccuTemp Products, Inc.
8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net
MM6910-1605