AccuTemp S62083D120 Operators Manual

STEAM ‘N’ HOLD

AccuTemp Products, Inc. 8415 North Clinton Park Fort Wayne, IN 46825260.469.3040

MP4007-0808

For Models with Serial Number 29030 and Above

STEAMER

PARTS MANUAL

TABLE OF CONTENTS

TABLE OF CONTENTS i

DOCUMENT HISTORY ii

REPLACEMENT PARTS PAGE REFERENCE LIST iii -v

BILLOF MATERIAL 1-5

6 PAN COMMON COMPONENTS 6-10

3 PAN COMMON COMPONENTS - 11-12

CONTROL PANEL MODULE 13-14

QUICK RELEASE DOOR ASSEMBLY 15

QUICK RELEASE DOOR ASSEMBLY - OUTER 16

QUICK RELEASE DOOR ASSEMBLY - INNER 17-18

QUICK RELEASE DOOR ASSEMBLY - VALVE BRACKET ASSY 19

GAST VACUUM PUMP AND MUFFLER ASSEMBLY 20

VACUUM HOSE ASSEMBLY 21

COMPONENT BRACKET ASSEMBLY 22-23

VOLTAGE WATTAGE PHASE MODULE 24-27

SPECIAL OPTIONS MODULE 28-30

LEG BASE ASSEMBLY KIT 31

STEAMER DRAIN KIT 32

CAST HEATER REPLACEMENT KIT 33

PRESSURE SWITCH ASSEMBLY 34

WARRANTY STATEMENT 35

MP 4007-0808 STEAM’N’HOLD PARTS MANUAL Page i

DOCUMENT HISTORY

Current revision: Prior revision: Date: Date: None

Change

_____________________________________________________________ __________

Form MP4007-0808

STEAM ’N’ HOLD

 STEAMER PARTS MANUAL Page ii

Steam"N"Hold Current Production

PART NUMBER

DESCRIPTION

MODEL

PAGE

Buzzers

AT0E-2807-1

Buzzer, Timer/Low Water

S3 & S6

22-23

Door

Quick Release Door -Current Production

AT1A-2912-1

QR Door Replacement - Right Hinged (floating inner)

S615AT1A-2912-3

QR Door Replacement - Left Hand (floating inner)

S615AT1A-2426-5

Floating Inner Door - Right hand

S6

17-18

AT1A-2426-6

Floating Inner door - Left Hand

S6

17-18

AT1A-2427-1

Valve Bracket Assy- (w/cups & rod)

S3 & S6

19

AT1A-2644-2

Quick Release Door handle

S3 & S6

16

AT1G-1830-1

Seal, QRD Suction Cup

S3 & S6

19

AT1H-2046-1

QRD, Spring Compression

S3 & S6

17-18

AT1M-3045-1

QRD Valve Cover

S3 & S6

17-18

AT1M-3046-1

QRD Latch Backer Plate -RH

S3 & S6

16

AT1M-3046-2

QRD Latch Backer Plate -LH

S3 & S6

16

AT1H-2058-2

Door Hinge (Pair)

S3 & S6

16

AT0F-2691-41011

Nut, 10-24 Waxed Nyloc

S3 & S6

16

AT0F-2061-41160

Screw, 10-24x13/4" Flat Hd Machine

S3 & S6

16

AT0F-2061-41140

Screw, 10-24x3/4" Flat Hd Machine

S3 & S6

16

Door Gasket

AT1G-2633-1

Gasket, Door S6 - Six Pan

S3 & S6

17-18

AT1G-2633-2

Gasket, Door S3 - 3 Pan

S3 & S6

17-18

Fittings/Screws

AT0F-2875-51050

Screw 1/4-20UNC x 5/8 Hex Head Machine Screw

S3 & S6

28

AT0F-1922-5000

Washer, 1/4" Helical Coil ( Drain Pan Bracket)

S3 & S6

28

AT0P-2987-2

Nylon Tee - Barbed 1/2x1/2x1/2

S3 & S6

21

AT0F-1046-31030

Truss Screws#8 x 3/8 SS

S3

11-12

AT0F-2777-31030

Screw, Self Tapping Truss Head 3/8"

S6

6,9

AT1P-2239

Ball Valve (drain)

S3 & S6

6,9,11-12

Fuses

AT0E-3162-1

Fuse, Slo-Blo 1/2 Amp

S3 & S6

22-23

Gauges

AT1A-3303-1

2" Thermometer Assembly

S3 & S6

13-14

AT0H-2614-1

2 " Vacuum Gauge Assembly

S3 & S6

13-14

Heaters

Cast Heater Kit; 208v 6kw, 230/7.3, 240/8, 380/6.7,

AT1A-3530-2

Cast Heater Kit; 240k/6kw

S3 & S6

34

Cast Heater Kit; 208v/8kw, 240/10.7, 380/9, 400/10,

Cast Heater Kit; 208v/12.0kw, 240/16, 380/13, 400/14.8,

AT1A-3530-6

Cast Heater Kit; 208v 10.0kw

S3 & S6

34

AT1A-3530-7

Cast Heater Kit; 208v 17.0kw

S3 & S6

34

Hoses

AT0P-2714-1

Hose Clamp 1/4

S3 & S6

21

AT0P-2714-2

Hose Clamp 1/2

S3 & S6

21

AT1P-2558-1

Hose 1/2 - 14"

S3 & S6

21

AT1P-2555-1

1/4" Silicone Hose - per ft'

S3 & S6

6,9

AT1P-2555-2

1/2" Silicone Hose - per ft'

S3 & S6

21

Lamps

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page iii

AT0F-2691-41011 Nyloc Nut, Serrated hex #10-24 S3 & S6 Not Shown

AT0E-2731-1 Fuse, Slo-Blo 3 Amp S3 & S6 22-23

AT0H-3544-1 2" Lens Cover for Thermometer and Vacuum Gauge S3 & S6 Not Shown

AT1A-3530-1

AT1A-3530-3 AT1A-3530-4

400/7.4, 415/8, 440/9, 480/10.7 S3 & S6 34

415/10.7, 480/14 S3 & S6 34 415/16, 440/18 S3 & S6 34

Steam"N"Hold Current Production

PART NUMBER

DESCRIPTION

MODEL

PAGE

AT0E-1800-5

Pilot Lamp Unit, 208/240V (Red)

S6

13-14

AT0E-1800-4

Pilot Lamp Unit, 208/240V (Green)

S6

13-14

AT0E-1800-6

Pilot Lamp Unit, 208/240V (Amber)

S6

13-14

AT0E-1800-9

Pilot Lamp Unit, 208/240V (Clear)

S6

13-14

Legs

AT0H-3040-1

Rubber Foot Tip (Cooker)

S3 & S6

31

AT1A-3030-1

Leg Assembly Kit, Steamer

S3 & S6

32

Misc. Electronic

AT0E-2717-1

MOV Transient Suppressor, 275V

S3 & S6

Misc. Hardware

AT1M-2590-1

Bracket, Interior Tray Left

S6

6,10

AT1M-2590-1

Bracket, Interior Tray Right

S6

6,10

AT1A-2548-1

Assembly, Pan Rack

S3

11-12

AT1M-2872-1

Drain Pan Bracket

S3 & S6

28

Overlay Graphics

AT1L-2804-3

Overlay, 180M Timer and External Thermostat

S6

13-14

AT1L-2804-1

Overlay, 90M Timer and External Thermostat

S6

13-14

AT1L-2804-2

Overlay, 90M Timer and Internal Thermostat

S6

13-14

AT1L-2804-4

Overlay, 20 Minute Timer

S6

13-14

AT1L-2804-5

Overlay, 180 Minute Timer

S6

13-14

AT1L-2575-1

Overlay, 90 Minute Timer and External Thermostat

S3

13-14

AT1L-2575-2

Overlay, 90 Minute Timer and Internal Thermostat

S3

13-14

AT1L-2529-1

Overlay, Instructions

S3 & S6

15

Overtemp

AT1E-2653-3

Overtemp - Cast Heater Only

S3 & S6

6,9, 11-12

PCB

AT1E-2593-1

Light Control Board

S3

12-Nov

Power Cords

AT0A-2788-10

17KW Power Cord Assy

S6

Relays

AT0E-2059-3

Solid State Relay, (D & A2450)

S3 & S6

27

AT0E-2996-1

Heat Pad - SSR

S3 & S6

27

AT0E-1587-1

Contactor, 3 Pole 208/240

S3 & S6

6,9,11-12

AT0E-2825-1

Control Relay, 208V 3PDT

S3 & S6

21-22

AT0E-2825-2

Control Relay, 240V 3PDT

S3 & S6

21-23

AT0E-2825-3

Control Relay, 208/240V 3PDT ( Replaces -1 or -2)

S3 & S6

21-24

Sheet Metal

AT1M-2979-1

Exterior Shell, Steamer - 6 Pan - Internal Muffler

S6

24-26

Exterior Shell, Steamer - 6 Pan 14 KW and above -

AT1M-2981-1

Side Panel - 6 Pan, Right

S6

6,9

AT1M-2781-2

Bottom Shell, 6 Pan Steamer

S6

6,9

AT1M-2981-2

Side Panel - 6 Pan, Left

S6

6,9

Stands

Switches

AT0E-2874-2

Toggle Switch - Fast Cook/Thermostat

S6

13-14

AT1E-2647-1

Pressure Switch - Single Pressure Switch

S3 & S6

13-14

Pressure Switch - Dual Pressure Switch -14 KW and

AT0E-3336-1

Operator, AB Rotary Switch

S3

13-14

AT0E-3337-1

On Pushbutton, Steamer

S6

13-14

AT0E-3337-2

Off Pushbutton, Steamer

S3 & S6

13-14

AT0E-3338-1

On Contact, Steamer

S3 & S6

13-14

AT0E-3338-2

Off Contact, Steamer

S3 & S6

13-14

AT0E-3339-1

Pushbutton Lock Ring

S3 & S6

13-14

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page iv

AT1M-2979-2

AT0H-2479-7 Stand Caster, Non-Break Stand Not Shown AT0H-2479-8 Stand Caster, Break Stand Not Shown

AT1E-2647-2

Internal Muffler S6 24-26

above S3 & S6 13-14

Steam"N"Hold Current Production

PART NUMBER

DESCRIPTION

MODEL

PAGE

Timers

AT0E-2297-1

Timer, 90 Minute

S3 & S6

13-14

AT0E-2297-2

Timer, 180 Minute

S3 & S6

13-14

AT0E-2297-3

Timer, 20 Minute

S3 & S6

13-14

AT0H-1455-2

Thermostat/Timer Repl. Knob-soft grip

S3 & S6

13-14

Thermocouples

AT0E-3386-1

Thermocouple

S3 & S6

6,9,11-12

Thermostats

AT0E-2559-2

AC Thermostat, Calibrated (100-200 F)

S3 & S6

13-14

Transformer

AT0E-2662-1

Transformer - for 440/480V

S3 & S6

24-25

Vacuum Pumps

AT1E-2991-1

Vacuum Pump, Gast (new style)

S3 & S6

20

Water Sensor

AT1E-2652

Probe Water Sensor

S3 & S6

6,9,11-12

AT1E-2654-1

PCB, Water Board Sensor

S3 & S6

20-21

Page v

RK935 Gast Vacuum Pump Rebuild Kit S3 & S6 Not Shown

B

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 1

Rev.

Sheet 1 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

BOM,

6 PAN FINAL

AT1A-3470

Drawing No.:

ECN: 352

D

Title:

Date

08-07-2007GLS

ALB 08-07-2007

Name

GLS 08-07-2007

Project Eng

Drawn

Checked

Size:

N/A

Material:

MODULE

Scale: 1:8

N/A

Finish:

DESCRIPTION

Do Not Scale Drawing

Unless otherwise specified,

Dimensions: Inches

COMMON

MODULE

Angular 1°

Bends: 90

Tolerances:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

COMPONENTS

)

20 AT1A-3377-5 RH CHAMBER

22 AT1A-3377-5 RH CHAMBER

24 AT1A-3377-7 RH CHAMBER

25 AT1A-3377-5 RH CHAMBER

30 AT1A-3377-6 LH CHAMBER

32 AT1A-3377-6 LH CHAMBER

34 AT1A-3377-8 LH CHAMBER

35 AT1A-3377-6 LH CHAMBER

SHEETS 2 THROUGH SHEET 5 SHOW COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.1.

DIGITS 13 & 14

NOTES:

Add the Module, Common Components derived from the model string digits 13 & 14.

Examples:

(S62083D0803020

20 = AT1A-3377-5

STEP 3. MODULE, COMMON COMPONENTS

EXAMPLE RESULT:

S62083D0803020 is made from modules AT1A-3472-28 + AT1A-3078-7 + AT1A-3377-5 + AT1T-3079-0

MODULE

AT1A-3078-730

AT1A-3078-1031

AT1A-3078-1032

AT1A-3078-1033

AT1A-3078-1034

AT1A-3078-1035

AT1A-3078-1036

AT1A-3078-8

AT1A-3078-1141

AT1A-3078-11

AT1A-3078-1146

AT1A-3078-950

AT1A-3078-12

CONTROL PANEL

40

42

43 AT1A-3078-11

44

45 AT1A-3078-11

51

52 AT1A-3078-12

53 AT1A-3078-12

54

55 AT1A-3078-12

56 AT1A-3078-12

20)

30

DIGITS 11 & 12

(S62083D080

See AT1T-2611 for internal thermostat settings represented by digit 12.

Add the Module, Control Panel derived from model string digits 11 & 12.

Example:

30 = AT1A-3078-7

MODULE,

AT1T-3079-2MARITIME SPECS

AT1T-3079-00 DRAIN PAN RAILS

SPECIAL OPTION

CONFIGURATION

AT1T-3079-4TAMPER-PROOF SPECS4

B

STEP 2. MODULE, CONTROL PANEL

MODULE,

DESCRIPTION

SPECIAL OPTION

4" LEGS WITH BULLET FEET AT1T-3079-5

5

B

)

0

2

DIGIT 14

WATTAGE /

AMPERAGE

0 = AT1T-3079-0

(S62083D080302

380V 13.0KW 20.3A

400V 7.4KW 10.7A

400V 10.0KW 14.2AAT1A-3472-41

400V 14.8KW 21.3A

415V 8.0KW 11.1AAT1A-3472-40S64155D080XXXX

415V 10.7KW 14.8A

415V 16.0KW 22.1A

480V 14.0KW 17.1A

Add the Module, Special Option derived from model string digit 14 for modification

of a standard model steamer.

Example:

RATED VOLTAGE /

STEP 4. MODULE, SPECIAL OPTION

PHASE

MODULE,

AT1A-3472-43

AT1A-3472-40

AT1A-3472-43

AT1A-3472-41

AT1A-3472-43

AT1A-3472-47 440V 9.0KW 11.8A

AT1A-3472-52

VOLTAGE WATTAGE

GLS/ALB01-15-08

GLS/ALB

DATE APPR

8/31/07RELEASED TO PRODUCTIONA

No.

DIGITS 1-10

S62081D060XXXX AT1A-3472-25 208V 6.0KW 16.7A

S62083D080XXXX AT1A-3472-28 208V 8.0KW 22.2A

GENERIC MODEL

Example:

and find the corresponding Module, Voltage Wattage Phase.

Using model string digits 1 though 10, locate the generic model number in the chart

created from the Steamer Model String Number Configuration (AT1T-2611), and follow steps 1 through 4.

AT1A-3470 MODULAR BOM FOR 6 PAN STEAMERS

To build up a complete 6 pan steamer assembly BOM, begin with the desired steamer model number,

Example: S62083D0803020

STEP 1. MODULE, VOLTAGE WATTAGE PHASE

Generic Model No. = S62083D080XXXX

Voltage Wattage Phase Module No. = AT1A-3472-28

S62083D100XXXX AT1A-3472-29 208V 10.0KW 27.8A

S62083D120XXXX AT1A-3472-30 208V 12.0KW 33.3A

S62083D170XXXX AT1A-3472-31 208V 17.0KW 47.2A

S62301D073XXXX AT1A-3472-32 230V 7.3KW 31.9A

S62401D060XXXX AT1A-3472-33 240V 6.0KW 25.0A

S62403D080XXXX AT1A-3472-36 240V 8.0KW 19.3A

S62403D107XXXX AT1A-3472-37 240V 10.7KW 25.7A

B

S62403D160XXXX AT1A-3472-39 240V 16.0KW 38.5A

S63805D067XXXX AT1A-3472-40 380V 6.7KW 10.2A

S63805D090XXXX AT1A-3472-41 380V 9.0KW 13.5A

S63805D130XXXX

S64005D074XXXX

S64005D148XXXX

S64005D100XXXX

S64155D107XXXX

S64155D160XXXX

S64403D180XXXX AT1A-3472-51 440V 18.0KW 23.5A

S64803D140XXXX

REVISIONS

TO ALL GENERIC MODEL NO

AMPERAGE WAS RATED VOLTAGE /

3472-38; 240V 10.7KW 25.7A WAS 240V

CHG'D: (STEP #1) S62403D107XXXX WAS

PRISON; RATED VOLTAGE / WATTAGE /

12.0KW; (STEP #4) TAMPER-PROOF WAS

S62403D120XXXX; AT1A-3472-37 WAS AT1A-

WATTAGE; ADDED: (STEP #1) AMPERAGE

REV DESCRIPTION

389 B

352

ECN

S64403D090XXXX

B

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 2

Rev.

Sheet 2 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

BOM,

6 PAN FINAL

AT1A-3470

Drawing No.:Size:

ECN: 352

D

Title:

Date

Name

08-07-2007

08-07-2007GLS

ALB 08-07-2007

GLS

N/A

Project Eng

Drawn

Checked

Material:

Scale: 1:4

N/A

Finish:

AT1A-3377

MODULE, 6 PAN COMMON COMPONENTS

AT1T-3079

MODULE, SPECIAL OPTION

Do Not Scale Drawing

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

AT1A-3472

MODULE, VOLTAGE WATTAGE PHASE

AT1A-3078

MODULE, STEAMER CONTROL PANEL

AT1A-3377

MODULE, 6 PAN COMMON COMPONENTS

B

Page 3

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Rev.Drawing No.:

Sheet 3 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

BOM,

AT1A-3470

6 PAN FINAL

ECN: 352

D

Title:

Date

08-07-2007

GLS

ALB

Name

Size:

N/A

Scale: 1:6

N/A

Project Eng

Drawn

Checked

Unless otherwise specified,

Dimensions: Inches

Bends: 90

Tolerances:

Material:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Angular 1°

Finish:

Do Not Scale Drawing

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

AT1A-3472 MODULE

(REMAINING ITEMS BELONG

TO AT1A-3377)

ALL MODELS

1

B

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 4

Rev.Drawing No.:

Sheet 4 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

BOM,

.12

.02

6 PAN FINAL

AT1A-3470

ECN: 352

D

Title:

Date

08-07-2007

08-07-2007GLS

Size:

PUMP HEAD

ALB

Name

GLS

N/A

Project Eng

Drawn

Checked

Material:

VACUUM PUMP SHOULD BE INSTALLED AND

SOME COMPONENTS ARE REMOVED FOR CLARITY

INSIDE OF THE EXTERIOR SHELL AND THE VACUUM

ADJUSTED TO THE DIMENSION SHOWN BETWEEN THE

Scale: 1:6

N/A

Finish:

AT1A-3377 MODULE

AT1A-3472 MODULE

AT1A-3377 MODULE

Do Not Scale Drawing

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

3

SOME COMPONENTS ARE REMOVED FOR CLARITY

(SEE INDIVIDUAL MODULAR DRAWINGS FOR APPLICABLE PART NUMBERS)

5

(SEE INDIVIDUAL MODULAR DRAWINGS FOR APPLICABLE PART NUMBERS)

AT1A-3377 MODULE

AT1A-3472 MODULE

AT1A-3377 MODULE

AT1A-3472 MODULE

AT1A-3078 MODULE

AT1A-3472 MODULE

AT1A-3078 MODULE

2

SOME COMPONENTS ARE REMOVED FOR CLARITY

4

(SEE INDIVIDUAL MODULAR DRAWINGS FOR APPLICABLE PART NUMBERS)

B

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 5

Rev.

Sheet 5 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

BOM,

6 PAN FINAL

AT1A-3470

Drawing No.:

ECN: 352

D

Title:

Date

08-07-2007

08-07-2007GLS

ALB

Name

GLS

Project Eng

Drawn

Checked

Size:

N/A

Material:

Scale: 1:6

N/A

Finish:

Do Not Scale Drawing

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

7

SOME COMPONENTS ARE REMOVED FOR CLARITY

(SEE INDIVIDUAL MODULAR DRAWINGS FOR APPLICABLE PART NUMBERS)

AT1A-3377 MODULE

AT1A-3472 MODULE

POWER CABLE GROUND

AT1A-3472 MODULE

WATER SENSOR PCB GROUND

AT1T-3079 MODULE

6

AT1A-3472 MODULE

SOME COMPONENTS ARE REMOVED FOR CLARITY

8

(SEE INDIVIDUAL MODULAR DRAWINGS FOR APPLICABLE PART NUMBERS)

F

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 6

Rev

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Sheet 1 of 5

Title

Date

3/16/2007

ALB

DPS

Name

Checked

Project Eng

Drawn

.02

DESCRIPTION

1°

MODULE 6 PAN

Drawing No.

COMMON COMPONENTS

ECN: 328

E

AT1A-3377

Size

N/A

Material:

.005

Scale: 1:4

N/A

Finish:

THREAD LOCKER LIQUID 243

WASHER, FENDER

PCB, 208/240VAC WATER SENSOR

BRACKET, WATER SENSOR AUTO-FILL

ASSY, GAST VACUUM PUMP MUFFLER

LABEL, SERIAL NUMBER DATA

SCREW, #8-32x3/8" DRL SPAN PAN HD MACH

SCREW, #8-32 x 3/8 PHLP TRUSS HEAD

LABEL STEAMER LEGS

76

75

74

73

72

71

PIPE THREAD SEALANT

BALL VALVE

66

67

68

69

70

THREAD LOCKER LIQUID 246

WAKEFIELD 120 THERMAL JOINT COMPOUND

WASHER, FIBER

65

64

WASHER, Ø.937 OD BELLEVILLE

WASHER, Ø1.00 OD BELLEVILLE

WASHER, 1/4" HELICAL SPRING LOCK

WASHER 1/4 PLAIN CUSTOM

WASHER 1/4 TYPE B PLAIN

WASHER #10 TYPE B PLAIN

NUT, SPECIAL LOCKING 1/4-20UNC-2B

NUT, CENTERLOCK LOCK

NUT, #6-32 NYLOC

NUT, #10-24UNC HEX SERRATED

SCREW, #6-32x1 1/4" DRL SPAN PAN HD MACH

SCREW, #6-32UNC X 1 1/4 PHILIPS ROUND HEAD MACHINE

63

62

61

60

59

58

57

56

55

54

53

SCREW, #8 TYPE AB X 3/8 DRL SPAN PAN HD

SCREW, #8 TYPE AB X 3/8 TRUSS HD

SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD MACHINE

SCREW, #10-24 x 3/4" DRL SPAN FLT HD MACH

SCREW, #10-24 x ¾" FLAT HD MACHINE

SCREW, 1/4-20UNC X 5/8 HEX HEAD MACHINE

LOOSE PIECES, STEAMER

LABEL, SERIAL NUMBER

FITTING, 1/8" NPT TO ½" HOSE BARB

1/2" ID HOSE CLAMP

1/4" ID HOSE CLAMP

ELBOW 90º COMPRESSION

BUMPER RUBBER

ENVELOPE, CLEAR

THERMOCOUPLE, RING

PROBE, WATER SENSOR

INSULATION, STEAMER

52

51

50

49

48

47

46

45

44

43

42

41

40

39

38

INSULATION, STEAMER

37

36

35

34

33

32

31

30

29

INSULATION, STEAMER

28

27

OVERTEMP SWITCH

26

25

OVERTEMP BRACKET

3 POLE CONTACTOR

PAN RACK SOLID RIGHT HAND

PAN RACK SOLID LEFT HAND

24

23

22

21

20

RAIL, PAN SUPPORT RIGHT HAND

RAIL, PAN SUPPORT LEFT HAND

COVER, STEAMER DRAIN

CENTER HEATER MOUNT

DRIP EDGE

HOSE ASSEMBLY

HEATER MOUNTING BRACKET ASSY

ASSY, FRONT BOTTOM Z BRACKET

ASSY, REAR BOTTOM Z BRACKET

HOSE ASSEMBLY

SHIM

9

8

19

18

17

16

15

14

13

12

11

10

7

STRIKE

DOOR ASSEMBLY 6 PAN LEFT HAND PRISON

DOOR ASSEMBLY 6 PAN RIGHT HAND PRISON

DOOR ASSEMBLY 6 PAN LEFT HAND

DOOR ASSEMBLY 6 PAN RIGHT HAND

PANEL, LEFT SIDE

PANEL, RIGHT SIDE

BOTTOM SHELL (6 PAN)

CHAMBER WELD ASSEMBLY 6 PAN STEAMER - LH CAST TAMPER-PROOF

CHAMBER WELD ASSEMBLY 6 PAN STEAMER - RH CAST TAMPER-PROOF

CHAMBER WELD ASSEMBLY 6 PAN STEAMER - LH CAST

CHAMBER WELD ASSEMBLY 6 PAN STEAMER - RH CAST

CHAMBER WELD ASSY 6 PAN STEAMER - LH FIREBAR TAMPER-PROOF UNIT

CHAMBER WELD ASSEMBLY 6 PAN STEAMER

CHAMBER WELD ASSY 6 PAN STEAMER - LH FIREBAR

HAMBER WELD ASSY 6 PAN STEAMER - RH FIREBAR

6

5

4

3

2

1

ITEM

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

3 Place Decimal

Tolerances:

Angular

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

AT1E-2654-1

AT1M-3428-2

AT1A-3099-1

AT1L-3357-1

AT0F-3448-31036

- -

2 2

- -

AT0F-1046-31030

AT1L-2624-1

AT0H-3102-1

AT1P-2239-1

AT0H-3065-2

AT0H-3412-1

2 2

- - - -

- -

- - - -

2 2

AT0H-3065-1

AT0F-3405-1

AT0F-2899-1

AT0F-2663-2

AT0F-2663-1

- - - -

- - - 32 32 32 32

AT0F-1922-50002

AT0F-1052-53000

AT0F-1052-51002

AT0F-1052-41002

AT0F-3401-1

AT0F-2895-51002

32 32 32 32

- - - 40 40 40 40

AT0F-2691-21002

AT0F-1017-41002

AT0F-3448-21106

AT0F-2755-21100

AT0F-2451-32036

AT0F-2777-31030

-

- -

2

57 57

- - -

11 11 11 11

2

57 57

- -

- - -

- -

2

57 57

AT0F-2755-41042

AT0F-3480-41066

AT0F-2061-41060

AT0F-2875-51052

AT1A-3387-1

AT1L-3369-1

- -

8 8

- -

8 8

- -

8 8

AT0P-2618-2

AT0P-2714-2

AT0P-2714-1

AT0P-2096-3

AT1H-3388-1

-

2

-

2

-

2

AT0S-3398-1

AT0E-3386-1

AT1E-2652-1

AT1I-2866-10

AT1I-2866-19

- -

1

-

1 1 1 1

AT1I-2866-18

AT1I-2866-17

AT1I-2866-16

AT1I-2866-15

AT1I-2866-11

- -

1

-

AT1I-2866-9

AT1I-2866-7

AT1I-2866-6

AT1I-2866-5

1 1 1 1

10 10 10 10

AT1I-2866-2

AT1I-2866-1

AT1E-2653-3

- -

1

-

AT1M-2651-2

AT0E-1587-1

AT1M-2905-2

AT1M-2905-1

AT1M-2590-2

- -

8 8

1 1 1 1

1 1

- -

1 1

- -

8 8

AT1M-2590-1

AT1M-3348-1

AT1M-2863-3

AT1M-2573-2

AT1M-2573-1

8 8

- -

4 4 4 4

8 8

AT1A-3066-6

AT1A-3400-2

AT1A-3400-1

AT1A-2626-3

AT1A-2623-3

- -

1

-

1 1 1 1

AT1A-3066-4

AT1H-2432-J

AT1H-2432-H

AT1A-2912-6

AT1A-2912-5

- -

- - -

1

- - -

AT1A-2912-3

AT1A-2912-1

AT1M-2981-2

AT1M-2981-1

AT1A-3409-2

-

1

- - -

1

AT1A-2968-8

AT1A-2968-7

AT1A-2968-6

AT1A-2968-5

AT1A-2968-4

- - -

- - - -

1

- - - - -

1

- - - - - -

1

AT1A-2968-3

AT1A-2968-2

AT1A-2968-1

-

1

- -

1

PART NUMBER

AT1A-3377-1

CC

QTY

AT1A-3377-2

QTY

AT1A-3377-3

QTY

AT1A-3377-4

QTY

AT3A-3377-5

CC

QTY

AT1A-3377-6

QTY

D

1 1 1 1 1 1 1 1

D

1 1 1 1 1 1 1 1

D

1 1 1 1 1 1 1 1

C

1 1 1 1 1 1 1 1

A C

2 2

A

AT1A-3377-7

- - -

-

- - -

1

- - - - - - -

1

QTY

AT1A-3377-8

- -

1 1 1 1 1 1 1 1

A

1 1 1 1 1 1 1 1

AR AR AR AR AR AR AR AR

AR AR AR AR

E

AR AR AR AR

AR AR AR AR AR AR AR AR

24 24 24 24

E

8 8 8 8 8 8 8 8

E

24 24 24 24

E

- - - -

2 2 2 2 2 2 2 2

- - - -

2 2 2 2 2 2 2 2

4 4 4 4 4 4 4 4

E

24 24 24 24

E

- - - -

6 4 6 4 6 4 6 4

9 9 9 9

E

A D

A

C E

2

A

- 57 57

A

C

A

- -

4 4 4 4 4 4 4 4

A

C

8 8

- -

2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1

4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1

2

1 1 1 1 1 1 1 1

E

A

2 2 2 2 2 2 2 2

- - - -

1 1 1 1

1 1 1 1 1 1 1 1

11 11 11 11 11 11 11 11

A

- - - -

1 1 1 1 1 1 1 1

A

12 12 12 12 12 12 12 12

1 1 1 1

A B

- - - -

1 1 1 1 1 1 1 1

1 1

A

1 1

- -

1 1 1 1 1 1 1 1

- - - -

1 1 1 1 1 1 1 1

1 1 1 1

- - - -

1 1 1 1 1 1 1 1

C

1

C

-

- -

- - -

1 1 1 1 1 1 1 1

A

1

-

- -

- - -

- - - -

- - - - -

- - - - - -

- - - - - - -

QTY

SEE AT1A-3359 MODULE, VOLTAGE WATTAGE PHASE FOR COMPONENT DETAILS.

TORQUE ITEM 56 (AT0F-2895-51002) NUTS TO 45±5 IN-LBS.

TORQUE ITEM 57 (AT0F-3401-1) SPECIAL LOCKING NUT TO 25±2 IN-LBS, STARTING IN THE CENTER

HEATING ELEMENTS ARE NUMBERED ONE TO THREE, FROM THE BACK TO THE FRONT OF THE STEAMER.

APPLY THIN FILM OF ITEM 68 (AT0H-3412-1) WAKEFIELD 120 THERMAL JOINT COMPOUND TO THE BOTTOM

APPLY ITEM 67 (AT0H-3065-2) LOCTITE 246 ONLY TO THE THREADS OF ITEM 25 (AT1E-2653-3) OVERTEMP SWITCH.

PLACE ITEM 48 (AT1A-3387-1) STEAMER LOOSE PIECES INTO EMPTY, DRY CHAMBER FOR SHIPPING.

TORQUE ITEM 39 (AT1E-2652-1) WATER SENSOR PROBE NUTS TO 11-14 IN-LBS.

APPLY ITEM 69 (AT0H-3102-1)THREAD SEALANT ON CUSTOM PIPE NIPPLE (AT1P-2476-1) ON CHAMBER WELD ASSEMBLY

APPLY ITEM 71 (AT1L-2624-1) LABEL TO ITEM 2 (AT1A-3409) BOTTOM SHELL APPROXIMATELY

SEE AT1A-3472 MODULE, VOLTAGE WATTAGE PHASE FOR COMPONENT DETAILS.

SEE AT1A-3352 BOM, 6 PAN FINAL FOR WATLOW FIREBAR HEATER DESIGN OR AT1A-3470 BOM, 6 PAN FINAL FOR CAST IN HEATER

LRW/ALB

03-19-08

CHG'D: (NOTE 4) 25±2 WAS 14±2

GLS/ALB

11-05-07

CHG'D: (BOM, GROUP AT1A-3377-3) ITEM50,

AT0F-2061-41060, QTY (-) WAS 8; ITEM 53, AT0F-

3448-21106, QTY (-) WAS 2; ITEM 55 QTY 4 WAS

6; ITEM 57, QTY (-) WAS 2; ITEM 58, QTY 4 WAS 8;

ITEM 63, QTY (-) WAS 2; ITEM 64, QTY 8 WAS 12;

ITEM 65, QTY (-) WAS 2; ITEM 68 QTY (-) WAS 1;

ADDED: (SHT 4, CV & SHT5, LHV) BALLOON #66

CHG'D: (GROUPS -1 THRU -4, ITEM #54) QTY 11

WAS 9, (BOM GROUPS -5 THRU -8, ITEM #54)

GLS/ALB

08-25-07

QTY 9 WAS 7, NOTE #1 “SEE AT1A-3352 BOM, 6

PAN FINAL FOR WATLOW FIREBAR HEATER

DESIGN OR AT1A-3470 BOM, 6 PAN FINAL FOR

CAST IN HEATER DESIGN, COMPONENT AND

MODULE ASSEMBLY ORIENTATIONS.” WAS “SEE

AT1A-3352 BOM, 6 PAN FINAL FOR COMPONENT

AND MODULE ASSEMBLY ORIENTATIONS.”, (SHT

GLS/DDI

08/16/07

3 LF) FLAG NOTE 12 WAS FLAG NOTE 2;

ADDED: (ALL GROUPS) ITEMS #74, #75 & #76;

NOTE 12 ; UPDATED VIEWS

RMV'D: (NOTE #4) “THEN LOOSEN 1/4 TURN”

CHG'D: (NOTE #4) 14 IN-LBS WAS 30; (GROUPS

AT1A-3377-3,-4,-7,-8) ITEM #50, AT0F-2061-41060

QTY 0 WAS 8; ITEM #52, AT0F-2451-32036 WAS

AT0F-2451-1 (GROUPS AT1A-3377-4,-8) ITEM #53,

AT0F-2755-21100 QTY 0 WAS 2; ITEM #72, AT0F-

3448-31036 WAS AT0F-3448-1 CLARIFIED VIEWS

ON SHTS 4 & 5, MOVED ITEM 39 BALLOON FROM

SHT 5 TO SHT 4

ADDED: (GROUPS AT1A-3377-3,-4,-7 & -8) ITEM

#50, AT0F-3480-41066 QTY 8; ITEM #5, AT1A-

2912-5 & -6; ITEM #73; (GROUPS AT1A-3377-4 & -

8) ITEM #53, AT0F-3448-21106

GLS/ALB

06-14-07

NOTE 2

WAS AT1E-2653-2, (SHT #2 LV) ITEM #24

AT0E-1587-3, ITEM #28 AT1I-2866-5 WAS AT1I-

RVM'D: (SHT #1 ITEM #24 GROUPS -1 THRU -4)

BALLOON; ADDED: (SHT #2) ADDITIONAL FLAG

WAS AT1A-3409-1, ITEM #22 AT0E-1587-1 WAS

AT0F-1052-21002; CHG'D: ITEM #2 AT1A-3409-2

REMOVED: AT1M-2865-1, AT1L-W1, AT1I-2866-8 &

2866-2, ITEM #32 AT1I-2866-11 WAS AT1I-2688-8,

ITEM #49 AT0F-2875-51052 WAS AT0F-2875-51041,

GLS/ALB

05-04-07

2755-21100 WAS AT0F-2755-41090, ITEM #54

ITEM #51 AT0F-2755-41042 WAS AT0F-2755-41060,

(AT0F-1017-41002) GROUP -1 & -3 QTY 9 WAS 5

ITEM #52 (AT0F-2777-31030) QTY 57 WAS 62, ITEM

#52 (AT0F-2451-1) QTY 57 WAS 62, ITEM #53 AT0F-

WAS 8 GROUPS -2, -4, -6 & -8 QTY 6 WAS 8,

GROUPS -2 & -4 QTY 9 WAS 7 GROUPS -5 & -7

GROUPS -1,-2,-3 & -4 ITEM #24 AT1E-2653-2 WAS

QTY 7 WAS 3 GROUPS -7 & -8 QTY 7 WAS 5, ITEM

#55 (AT0F-2691-21002) GROUP -1,-3, -5 & -7 QTY 4

31030 & AT0F-3448-1), NOTE #10 & #11

ITEM #71 (ATIL-2624-1), ITEM #72 (AT0F-1046-

AT1E-2653-1; ADDED ITEM #70 (AT1P-2239-1) &

APPR

DPS/ALB

DATE

03-26-07

REVISIONS

DESCRIPTION

RELEASED TO PRODUCTION

NOTES:

1.

DESIGN, COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.

D

2

3

4

AND WORKING FIRST TO THE SIDES (SIDES OF STEAMER CHAMBER) AND THEN TO THE ENDS

(FRONT AND BACK OF STEAMER CHAMBER) OF THE HEATER. TIGHTEN TWICE IN THIS MANNER.

F

C

5

6

7

8

OF ITEM 25 (AT1E-2653-3) OVERTEMP SWITCH.

9

DO NOT EXCEED 14 IN-LBS AS THIS WILL STRIP THE THREADS.

A

10

(AT1A-2968) BEFORE SECURELY MOUNTING BALL VALVE (AT1P-2239-1).

11

.25" FROM THE CONTROL PANEL SIDE AND 9.00" BACK FROM THE FRONT. ORIENT THE LABEL

SO THAT THE TEXT CAN BE READ FROM THE LEFT SIDE OF THE STEAMER IN ITS NORMAL UPRIGHT POSITION.

A

12

D

F

398

E

377

D

352

C

364

B

350

A

340

328

REV

ECN

F

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Rev

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Sheet 3 of 5

32

A

Date

3/16/2007

ALB

Name

Drawn

MODULE 6 PAN

Drawing No.

COMMON COMPONENTS

E

AT1A-3377

Title

3/16/2007

DPS

Checked

Project Eng

.02

1°

Size

N/A

Material:

.005

Finish:

ECN: 328

Scale: 1:4

N/A

A

29

26

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

3 Place Decimal

Tolerances:

Angular

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

36

37

35

26

A

28

32

A

27

33

34

32

A

AT1A-3377-5 THRU AT1A-3377-8

SOME COMPONENTS ARE REMOVED FOR CLARITY

OTHERWISE SAME AS AT1A-3377-1 THRU AT1A-3377-4

D

12

65

63

4

57

PIN 3

5

PIN 2

5

PIN 1

5

7

2568

6

A

51

58

11

F

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Rev

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Sheet 2 of 5

32

Date

3/16/2007

ALB

Name

Drawn

MODULE 6 PAN

Drawing No.

COMMON COMPONENTS

E

AT1A-3377

Title

3/16/2007

DPS

Checked

Project Eng

.02

1°

Size

N/A

Material:

.005

Finish:

ECN: 328

Scale: 1:4

N/A

26

A

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

3 Place Decimal

Tolerances:

Angular

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

A

29

31

30

38

28

26

32

A

33

27

A

34

32

A

AT1A-3377-1 THRU AT1A-3377-4

SOME COMPONENTS ARE REMOVED FOR CLARITY

2

62

60

3

10

56

16

B

2

23

54

A

51

58

9

F

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 9

Rev

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Sheet 4 of 5

Date

3/16/2007

ALB

Name

Drawn

MODULE 6 PAN

Drawing No.

COMMON COMPONENTS

E

AT1A-3377

Title

3/16/2007

DPS

Checked

Project Eng

.02

1°

Size

N/A

Material:

.005

Finish:

ECN: 328

Scale: 1:4

N/A

5

50 66

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

3 Place Decimal

Tolerances:

Angular

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

52

50

6

7

4852

E

66

8

3

39

72

1

17

15

10

73

47

10

14

70

A

69

8

69

D

43

74

75

76

54

D

A

51

64

54

58

9

A

54 40

64

39

9

44

A

71

AT1A-3377-1 THRU AT1A-3377-8

11

SOME COMPONENTS ARE REMOVED FOR CLARITY

2

52

A

49 61 59

45

13

22

55

46

69

41

4

52

F

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Rev

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Sheet 5 of 5

21

20

Date

3/16/2007

ALB

Name

Drawn

MODULE 6 PAN

Drawing No.

COMMON COMPONENTS

E

AT1A-3377

Title

3/16/2007

DPS

Checked

Project Eng

.02

1°

Size

N/A

Material:

.005

Finish:

ECN: 328

Scale: 1:4

N/A

72

PRISON SPEC

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

3 Place Decimal

Tolerances:

Angular

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

AT1A-3377-3,-4,-7, & -8

SOME COMPONENTS ARE REMOVED FOR CLARITY

52

19

18

AT1A-3377-1,-2,-5 & -6

SOME COMPONENTS ARE MODIFIED OR REMOVED FOR CLARITY

E

66

7

6

5

50

A

53

50

66

1

42

LEFT HAND DOOR

AT1A-3377-2,-4,-6, & -8

SOME COMPONENTS ARE REMOVED FOR CLARITY

A

55

8415 N. Clinton Park

Form MP4007-0808 AccuTemp Steam'N'Hold

Page

11

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Date

10/13/2006

ATP

LRW

DESCRIPTION

Name

F

Rev

Sheet 1 of 2

AT1A-2650

MODULE, 3 PAN

Drawing No.

COMMON COMPONENTS

ECN: 328

E

Title

10/13/2006

LRW

N/A

Size

Scale: 1:4

N/A

PCB, 208/240VAC WATER SENSOR

BRACKET, WATER SENSOR AUTO-FILL

ASSY, GAST VACUUM PUMP MUFFLER

THREAD LOCKER LIQUID 246

WAKEFIELD 120 THERMAL JOINT COMPOUND

OVERTEMP SWITCH

WASHER, FENDER

WASHER, Ø.937 OD BELLEVILLE

NUT, SPECIAL LOCKING 1/4-20UNC-2B

INSULATION, STEAMER

HEATER MOUNTING BRACKET ASSY

75

74

73

72

71

70

69

68

67

66

65

64

63

62

WASHER, 1/4" HELICAL SPRING LOCK

WASHER, Ø1.00 OD BELLEVILLE

WASHER 1/4 PLAIN CUSTOM

61

60

WASHER 1/4 TYPE B PLAIN

59

58

WASHER #10 TYPE B PLAIN

WASHER, FIBER

NUT, CENTERLOCK LOCK

NUT, #10-24UNC HEX SERRATED

NUT, #6-32 NYLOC

U-NUT

SCREW, 1/4-20UNC X 5/8 HEX HEAD MACHINE

SCREW, #10-24 x 1" FLAT HD MACHINE

SCREW, #6-32UNC X 1 1/4 PHILIPS ROUND HEAD MACHINE

57

56

55

54

53

52

51

50

49

48

SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD MACHINE

47

SCREW, #8-32 x 3/8 PHLP TRUSS HEAD

SCREW, #8 TYPE AB X 1/2 TRUSS HD

LOOSE PIECES, STEAMER

BUMPER RUBBER

QD TERMINAL FEMALE INSULATED 18-22 AWG .250 x .032 TAB

PIPE THREAD SEALANT

LUBRICANT, ANTI-SEIZE

THREAD LOCKER LIQUID 243

LABEL, SERIAL NUMBER

LABEL, SERIAL NUMBER DATA

ENVELOPE, CLEAR

BALL VALVE

3 POLE CONTACTOR

PROBE, WATER SENSOR

ELBOW 90º COMPRESSION

46

45

44

43

42

41

40

39

38

37

36

35

34

33

32

1/2" ID HOSE CLAMP

1/4" ID HOSE CLAMP

31

THERMOCOUPLE, RING

30

29

HOSE ASSEMBLY

INSULATION, STEAMER

28

27

26

25

24

INSULATION, STEAMER

23

22

21

20

19

18

17

16

15

SPACER, HINGE

DRIP EDGE

OVERTEMP BRACKET

COVER, STEAMER DRAIN

TOP SHELL, 3 PAN

14

13

12

11

10

9

ASSY, PAN RACK

DOOR ASSEMBLY 3 PAN LEFT HAND

DOOR ASSEMBLY 3 PAN RIGHT HAND

ASSY, REAR BOTTOM Z BRACKET

ASSY, FRONT BOTTOM Z BRACKET

HEATER MOUNT

CENTER HEATER MOUNT

HEAT SINK PLATE

ASSY, LH DR STEAMER CHAMBER WELDMENT

ASSY, RH DR STEAMER CHAMBER WELDMENT

ASSY, LH DR STEAMER CHAMBER WELDMENT

ASSY, RH DR STEAMER CHAMBER WELDMENT

8

7

6

5

4

3

2

1

ITEM

Checked

Material:

Project Eng

Drawn

.02

.005

1°

.005

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

3 Place Decimal

Tolerances:

Angular

Finish:

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

AT1E-2654-1

AT1M-3428-2

AT1A-3099-1

AT0H-3065-2

AT0H-3412-1

- -

1 1 1 1

AR AR

DDD

D

AT1E-2653-3

AT0F-3405-1

AT0F-2663-2

AT0F-3401-1

AT1I-2866-19

- -

D

1 1

24 24

D

24 24

D

24 24

D

1 1

D

AT1I-2866-18

AT1I-2866-17

AT1A-3400-2

AT1A-3400-1

AT0F-1922-50002

- -

1 1

2 2 2 2

D

A

AT0F-2663-1

AT0F-1052-53000

32 32

- -

A

AT0F-1052-51002

32 32

- -

2 2 2 2

A

AT0F-1052-41002

- -

4 4 4 4

C

AT0F-2899-1

AT0F-2895-51002

AT0F-1017-41002

AT0F-2691-21002

AT0F-2937-1

40 40

11 11

- -

8 8 8 8

A

9 9

D

5 4 5 4

A

2 2 2 2

A

AT0F-2875-51052

AT0F-2061-41080

AT0F-2755-21100

AT0F-2755-41042

AT0F-1046-31030

AT0F-2777-31040

-

1

-

2 2 2 2

8 8 8 8

1

A

4 4 4 4

C A

13 13 13 13

2 2 2 2

AT1A-3387-1

AT1H-3388-1

AT0E-2699-2

AT0H-3102-1

AT0H-3360-1

-

1

AR AR

-

1 1 1 1

1

1 1 1 1

- -

AR AR AR AR

AT0H-3065-1

AT1L-3369-1

AT1L-3357-1

AT0S-3398-1

AT1P-2239-1

1 1 1 1

AR AR AR AR

1 1 1 1

AT0E-1587-1

AT1E-2652-1

AT0P-2096-3

AT0P-2714-2

AT0P-2714-1

1 1 1 1

2 2 2 2

1 1 1 1

3 3 3 3

1 1 1 1

A

AT0E-3386-1

1 1 1 1

AT1A-3066-7

AT1A-3066-5

AT1I-2866-14

- -

1 1 1 1

B

AT1I-2866-13

AT1I-2866-12

AT1I-2866-10

AT1I-2866-9

AT1I-2866-7

1 1

10 10

- -

2 2 2 2

1 1 1 1

- -

AT1I-2866-20

AT1I-2866-4

AT1I-2866-3

AT1I-2866-2

AT1I-2866-1

1 1 1 1

2 2 2 2

8 8 8 8

1 1 1 1

9 9 9 9

A

AT1M-2557-1

AT1M-2573-2

AT1M-2573-1

AT1M-2651-2

AT1M-3348-1

1 1

1 1 1 1

- -

1 1 1 1

8

AT1M-2516-1

AT1A-2548-1

AT1A-2912-4

AT1A-2912-2

AT1A-2623-3

-

1

-

1 1 1 1

2 2 2 2

1

-

1

-

1 1

- -

AT1A-2626-3

AT1M-2862-6

AT1M-2863-3

AT1M-3068-1

AT1A-3365-4

1 1

2 2

4 4

1 1

- - -

- -

1

D

AT1A-3365-3

AT1A-3365-2

AT1A-3365-1

-

1

- -

1

-

- -

- - -

D

PART NUMBER

AT1A-2650-1

QTY

AT1A-2650-2

QTY

AT1A-2650-3

QTY

D

AT1A-2650-4

QTY

D

12

63

68

67

69

D

PIN 3

9

PIN 2

9

PIN 1

9

11

10

OTHERWISE SAME AS AT1A-2650-1

AT1A-2650-3 AND AT1A-2650-4

SOME COMPONENTS ARE REMOVED FOR CLARITY

707172

62

46

10

1

35 41

3

40

2

4

2

60

59

4

54

5

54

AT1A-2650-1 AND AT1A-2650-2

6

SOME COMPONENTS ARE REMOVED FOR CLARITY

11

53

B

2

3

4

SEE AT1A-3359 MODULE, VOLTAGE WATTAGE PHASE FOR COMPONENT DETAILS.

SEE AT1A-3080 BOM , 3 PAN FINAL FOR WATLOW FIREBAR HEATER DESIGN OR AT1A-3471 BOM, 3 PAN FINAL

CAST IN HEATER DESIGN FOR COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.

2

NOTES:

1.

APPLY ITEM 40 EVENLY ONTO ITEM 2, COMPLETELY COVERING THE SURFACE

THAT WILL BE IN CONTACT WITH THE CHAMBER BOTTOM. DO NOT APPLY TO THE OPPOSITE

SIDE OF ITEM 2.

3

TORQUE NUTS TO 45±5 IN-LBS.

ITEM 42 IS USED TO INSULATE A TERMINAL ON ITEM 34 TO PREVENT ACCIDENTAL

YOU MAY NEED TO GENTLY SLIT THE OVERLAY (AT1A-3078 MODULE) TO INSTALL ITEM 48.

TORQUE NUTS TO 11 - 14 IN-LBS. DO NOT EXCEED 14 IN-LBS AS THIS WILL STRIP THE THREADS.

TORQUE ITEM 67 (AT0F-3401-1) SPECIAL LOCKING NUT TO 25±2 IN-LBS, STARTING IN THE CENTER

SHORTING TO THE MUFFLER. SEE DETAIL A ON SHEET 2 FOR EXACT PLACEMENT OF ITEM 41.

4

5

6

7

8

AND WORKING FIRST TO THE SIDES (SIDES OF STEAMER CHAMBER) AND THEN TO THE ENDS

(FRONT AND BACK OF STEAMER CHAMBER) OF THE HEATER. TIGHTEN TWICE IN THIS MANNER.

HEATING ELEMENTS ARE NUMBERED ONE TO THREE, FROM THE BACK TO THE FRONT OF THE STEAMER.

9

APPLY THIN FILM OF ITEM 71 (AT0H-3412-1) WAKEFIELD 120 THERMAL JOINT COMPOUND TO THE BOTTOM

10

OF ITEM 70 (AT1E-2653-3) OVERTEMP SWITCH.

APPLY ITEM 72 (AT0H-3065-2) LOCTITE 246 ONLY TO THE THREADS OF ITEM 70 (AT1E-2653-3) OVERTEMP SWITCH.

11

SEE AT1A-3472 MODULE, VOLTAGE WATTAGE PHASE FOR COMPONENT DETAILS.

12

GLS/ALB

LRW/ALB

11-05-07

03-18-08

ADDED: (SHT 2, BOTTOM RH VIEW) BALLOON 39

CHG'D: (NOTE1) "SEE AT1A-3080 BOM, 3 PAN

CHG'D: (NOTE 8) 25±2 WAS 14±2

F

FINAL FOR WATLOW FIREBAR HEATER DESIGN

E

GLS/ALB

08-09-07

OR AT1A-3471 BOM, 3 PAN FINAL CAST IN HEATER

DESIGN FOR COMPONENT AND MODULE

ASSEMBLY ORIENTATIONS." WAS "SEE AT1A-3080

BOM, 3 PAN FINAL FOR COMPONENT AND

MODULE ASSEMBLY ORIENTATIONS."; (GROUPS -

1 & -2, ITEM #53) QTY 11 WAS 9; ADDED: AT1A-

2650-3 & -4; NOTES 8 THRU 12; ITEMS 1 (AT1A-

3365-3 &-4, ASSY, LH & RH STEAMER CHAMBER

D

GLS/ALB

07-12-07

ITEM 47) QTY 4 WAS 6

1922-40000 QTY 4; CHG'D (BOM, ALL GROUPS,

RMV'D: (BOM, ALL GROUPS, ITEM 57) WAS AT0F-

WELDMENT) 62 THRU 75; UPDATED VIEWS

C

GLS/ALB

06-14-07

NOTE 2

RVM'D: (SHT #1 ITEM #28) WAS AT1E-2613-2, ITEM

ITEM #19 AT1I-2866-20 WAS AT1I-2866-6, ITEM #34

R'MVD: AT0F-2691-41002, AT0F-1052-21002; CHG'D:

#28 BALLOON; ADDED: (SHT #1) ADDITIONAL FLAG

B

GLS/ALB

05-04-07

AT0E-1587-1 WAS AT0E-1587-3, ITEM #47 AT0F-

2755-41042 WAS AT0F-2755-41052, ITEM #48 AT0F-

21100 WAS AT0F-2755-41090, ITEM #50 AT0F-2875-

41, ITEM #59 (AT0F-1052-53000) QTY 32 WAS 33,

21002) GROUP -1 QTY 4 WAS 8, GROUP -2 QTY 5

51052 WAS AT0F-2875-51051, ITEM #52 (AT0F-2691-

A

AT0F-2061-41080 WAS AT0F-2061-41060; ADDED

ITEM#60 (AT0F-2663-1) QTY 32 WAS 33, ITEM #49

WAS 9,ITEM #54 (AT0F-2895-510002) QTY 40 WAS

APPR

GLS/ATP

DATE

1/24/07

REVISIONS

DESCRIPTION

ITEM #61 (AT0F-1922-50002)

RELEASED TO PRODUCTION

REV

D

F

D

398

377

352

355

350

340

328

ECN

F

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page

12

Rev

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Sheet 2 of 2

13

12

38

46

8

Date

10/13/2006

ATP

Name

Drawn

AT1A-2650

MODULE, 3 PAN

Drawing No.

COMMON COMPONENTS

E

Title

10/13/2006

LRW

Checked

Project Eng

.02

1°

Size

N/A

Material:

.005

N/A

Finish:

ECN: 328

Scale: 1:4

51

47

56

30

27

26

SOME COMPONENTS ARE REMOVED FOR CLARITY

7

33

44

SOME COMPONENTS ARE REMOVED FOR CLARITY

Do Not Scale Drawing

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

PLACE THIS ITEM INTO EMPTY, DRY CHAMBER FOR SHIPPING

3 Place Decimal

Tolerances:

Angular

49 39

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

45

31

HOOK THIS END

TO VACUUM GAGE

HOOK THIS END

TO VACUUM PUMP

E

39

?

7

6

A

48

TO CHAMBER VACUUM PORT

D

PLACE SCHEMATIC (AT1A-3359 MODULE) INSIDE ITEM 36

AND ADHERE TO UNDERSIDE OF TOP COVER.

36

14

43

64

66

OTHERWISE SAME AS AT1A-2650-1

AT1A-2650-3 AND AT1A-2650-4

9

SOME COMPONENTS ARE REMOVED FOR CLARITY

A

52

SOME COMPONENTS ARE REMOVED FOR CLARITY

65

46

5

42

34

DETAIL A

SCALE 1 : 2

18

17

TYP

1.38

A

15

19

3241

29

53

22

21

37

20

AT1A-2650-1 AND AT1A-2650-2

55

SOME COMPONENTS ARE REMOVED FOR CLARITY

15

A

16

18

25

17

23

17

24

D

73

A

58

61

D

74

D

53

D

53

55

SOME COMPONENTS ARE REMOVED FOR CLARITY

5

75

A

34 42

52

50

C

Page 13

Rev.

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

Sheet 1 of 2

WASHER, 3/8 INTERNAL TOOTH LOCK

NUT, HEX THIN 3/8-32UNEF-2B

NUT, ROTARY SHAFT SEAL

NUT, #6-32 NYLOC

SCREW, #6-32UNC X 1/4 PHILIPS ROUND HEAD MACHINE

SILICONE GREASE, Z9 HEAT SINK COMPOUND

ADAPTOR, DUAL SPADE UNINSULATED DISCONNECT

OVERLAY, INTERNAL THERMOSTAT BRKT

STANDOFF, #6-32 x 1/2 HEX FEMALE

29

28

27

26

25

24

23

22

21

STATUS INDICATOR PCB 208/240V

BRKT, THERMOSTAT

INDICATOR LAMP CLR NEON 250V

INDICATOR LAMP AMBER NEON 250V

INDICATOR LAMP RED NEON 250V

INDICATOR LAMP GRN NEON 250V

MOUNTING LATCH

CONTACT BLOCK

20

19

18

17

16

15

14

13

CONTACT BLOCK

OPERATOR, AB PUSH BUTTON SWITCH

OPERATOR, AB ROTARY SWITCH

TOGGLE SWITCH

KNOB FOR D SHAFT

ASSY, TEMP GAGE & BULB BRKT

9

8

7

6

12

11

10

6

VACUUM GAGE ASSEMBLY

TIMER 20 MINUTE

TIMER 180 MINUTE

TIMER 90 MINUTE

OVERLAY, 180 MINUTE TIMER

OVERLAY, 20 MINUTE TIMER

OVERLAY, CONTROL 90 MINUTE

5

4

3

2

DESCRIPTION

OVERLAY, CONTROL 90 MINUTE

OVERLAY, CONTROL 180 MINUTE

OVERLAY, CONTROL 90 MINUTE

2

1

ITEM

Date

10/12/2006

ALB

Name

Drawn

MODULE,

Title:

10/12/2006

LRW

Project Eng

Checked

1°

Material:

.02

.005

AT1A-3078

CONTROL PANEL

Drawing No.:

ECN: 328

D

Size:

N/A

.005

Scale: 1:4

N/A

Finish:

AT0F-2666-70002

AT0F-3390-1

AT0F-3371-1

AT0F-2691-21002

- - -

1 1 1

- - -

2 2 2

AT0F-2755-21020

AT0H-3304-1

AT0E-2129-1

AT1L-3362-1

- - -

3 3 3 3 3 3

1 1 1 1 1 1

1 1 1

AT0F-2665-20045

AT1E-2593-1

AT1M-3406-1

AT0E-1800-9

- - -

3 3 3 3 3 3

1 1 1 1 1 1

- - - - - -

1 1 1

AT0E-1800-6

AT0E-1800-5

AT0E-1800-4

- - - - - -

AT0E-3339-1

AT0E-3338-2

AT0E-3338-1

AT0E-3337-2

AT0E-3337-1

AT0E-3336-2

- - - - - -

1 1 1 1 1 1

AT0E-2874-3

AT0E-2874-2

AT0H-1455-2

- - -

- - - - - -

1 1 1

AT1A-3303-2

AT1A-3303-1

AT1A-2616-1

- - - - - -

1 1 1 1 1 1

AT0E-2297-3

AT0E-2297-2

AT0E-2297-1

-

1

- -

1

- -

1

- -

1

- -

AT1L-2804-5

AT1L-2804-4

AT1L-2575-2

-

- -

1

- - -

1

- -

1

1 1 1

AT1L-2575-1

AT1L-2804-3

AT1L-2804-2

1 1 1

AT1L-2804-1

PART NUMBER

- - - - - -

AT1A-3078-1

QTY

AT1A-3078-2

QTY

AT1A-3078-3

QTY

AT1A-3078-4

QTY

AT1A-3078-5

QTY

AT1A-3078-6

QTY

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

Tolerances:

3 Place Decimal

Angular

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

SEE AT1A-3080 BOM, 3 PAN FINAL FOR 3 PAN STEAMER COMPONENT AND MODULE ASSEMBLY ORIENTATION.

SEE AT1A-3352 BOM, 6 PAN FINAL FOR 6 PAN STEAMER COMPONENT AND MODULE ASSEMBLY ORIENTATION.

NOTES:

1.

2.

INSERT ITEM 23 BETWEEN THE TIMER MOTOR LEAD AND THE TERMINAL TM.

REFERENCE AT1T-3067 FOR STEAMER ELECTRICAL SPEC'S AND SCHEMATIC DRAWING NUMBERS.

4

3.

APPLY ITEM 24 TO THE BACK MOUNTING SURFACE OF THE EXTRUSION, MODIFIED THERMOMETER MOUNT

(AT1M-3347-1 FOR 6 PANS, AT1M-3347-2 FOR 3 PANS) OF ITEM 6 BEFORE INSTALLING ON TO THE STEAMER CHAMBER SIDE.

- - -

5

1 1 1 1 1 1 1 1 1 1 1 1

BC

1 1 1

1 1 1 2 2 2 1 1 1 2 2 2

- - - - - -

2 2 2

AR AR AR AR AR AR AR AR AR AR AR AR

- - - - - -

1 1 1

- - - - - -

1 1 1

1 1 1 1 1 1

2 2 2 2 2 2

1 1 1 1 1 1

2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 3 3 3

1 1 1 1 1 1 1 1 1 1 1 1

A

AT1A-3078-7

- -

1

- - - - - - -

1

QTY

AT1A-3078-8

- -

1

- -

1

-

QTY

AT1A-3078-9

1

- -

1

- - - - - - - - -

1

QTY

AT1A-3078-10

- -

- - - - -

1

QTY

AT1A-3078-11

- -

1

- -

1

QTY

AT1A-3078-12

- - - - - -

A

- - - - - -

A

1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1

- - - - - -

2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1

-

- -

1

-

- - - - - -

- - - - - - - - -

1

- - - -

- - -

1 1 1

QTY

GLS/DDI

GLS/ALB

10-30-07

CHG'D: (GROUPS -4,-5,-6,-10,-11 & -12, ITEM

#29, AT0F-2666-70002) QTY 1 WAS 2

CHG'D: (GROUPS -1,-2,-3,-7,-8 & -9 ITEM #29)

C

GLS/ALB

09/12/07

05-08-07

QTY 1 WAS 2

CHG'D: ITEM #9 AT0E-3336-2 WAS AT0E-

3336-1, ITEM #13 GROUPS -1,-2 & -3 QTY 3

WAS 2: ADDED: AT0E-2874-3

B

A

APPR

LRW/ATP

DATE

11/13/06

REVISIONS

DESCRIPTION

RELEASED TO PRODUCTION

- REV

375

367

340

328

ECN

Rev.

Page

14

C

7

8

28

C

22

26

19

8

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

MODULE,

CONTROL PANEL

AT1A-3078

Drawing No.:

D

Date

10/12/2006

ALB

Name

Drawn

Title:

10/12/2006

LRW

Project Eng

Checked

Size:

N/A

Material:

Finish:

Sheet 2 of 2

ECN: 328

Scale: 1:4

N/A

5

41

29

14 1312

6 PAN STEAMER

GROUPS 10-12

INTERNAL THERMOSTAT

5

24

6

.02

.005

1°

.005

T.I.R

2 Place Decimal

Unless otherwise specified,

Dimensions: Inches

Bends: 90

Tolerances:

3 Place Decimal

Angular

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

5 6 6

3

27

7

16

15

17

11

10

18

GROUPS 7-9

6 PAN STEAMER

EXTERNAL THERMOSTAT

27

OTHERWISE SAME AS GROUPS 10-12

7

C

28

8

26

22

19

A

8

4

23

25

4

20

5

6

29

21

13

12

14

5

24

13

A

29

GROUPS 4-6

3 PAN STEAMER

12 13

INTERNAL THERMOSTAT

GROUPS 1-3

3 PAN STEAMER

2

6

5

3

27

A

11

9

6

EXTERNAL THERMOSTAT

OTHERWISE SAME AS GROUPS 4-6

27

7

B

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 15

Rev.

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-2912

DOOR ASSEMBLY

QUICK RELEASE

rawing No.: D

ECN:

TYP INNER DOOR (ITEM #1) &

OUTER DOOR (ITEM #2) ASSEMBLY

INNER DOOR ASSEMBLY 3 PAN RIGHT HAND1AT1A-2426-2-1----

INNER DOOR ASSEMBLY 6 PAN LEFT HAND

1AT1A-2426-6

1 INNER DOOR ASSEMBLY 6 PAN RIGHT HAND

itle: T

07/14/04

02/23/05

02/23/05RP

RP

ALB

Name Date

Drawn

Checked

Project Eng

Material:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

D

Size:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Scale: 1:2 Sheet 1 of 1

Finish:

Do Not Scale Drawing

Comments:

AT1A-2912-4

DOOR ASSEMBLY 3 PAN LEFT HAND

1 1 1 1 1 1 AT1L-2594-1 3 OVERLAY, INSTRUCTIONS, STEAMER

- 1 - - - - AT1A-2428-5 2 OUTER DOOR ASSEMBLY 6 PAN RIGHT HAND

1 - - - - - AT1A-2428-6 2 OUTER DOOR ASSEMBLY 6 PAN LEFT HAND

- - 1 - - - AT1A-2428-4 2 OUTER DOOR ASSEMBLY 3 PAN LEFT HAND

- - - 1 - - AT1A-2428-3 2 OUTER DOOR ASSEMBLY 6 PAN LEFT HAND

- - - - 1 - AT1A-2428-2 2 OUTER DOOR ASSEMBLY 3 PAN RIGHT HAND

- - - - - 1 AT1A-2428-1 2 OUTER DOOR ASSEMBLY 6 PAN RIGHT HAND

- - 1 - - - AT1A-2426-4 1 INNER DOOR ASSEMBLY 3 PAN LEFT HAND

1 - - 1 - -

B

AT1A-2426-51---1-

PART NUMBER ITEM DESCRIPTION

AT1A-2912-1

QTY

AT1A-2912-2

QTY

AT1A-2912-3

QTY

AT1A-2912-4

QTY

AT1A-2912-5

QTY

A

AT1A-2912-6

QTY

A

AT1A-2912-3 & AT1A-2912-6

DOOR ASSEMBLY 6 PAN LEFT HAND

AT1A-2912-2

DOOR ASSEMBLY 3 PAN RIGHT HAND

1

A

04-14-08 LRW/ALB

AT1A-2912-1 & AT1A-2912-5

2

3

DOOR ASSEMBLY 6 PAN RIGHT HAND

EVISIONS R

AT1A-2426-6 WAS AT1A-2426-3

CHG'D: (BOM) AT1A-2426-5 WAS AT1A-2426-1,

- EDR-030 RELEASED TO PRODUCTION 02-16-05 RP / ALB

402 B

364 A ADDED: GROUPS AT1A-2912-5 &-6 08/15/07 GLS/DDI

ECN REV DESCRIPTION DATE APPR

I

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 16

Rev.Drawing No.:Size:

415 N. Clinton Park

ort Wayne, IN 46825

8

F

AccuTemp Products, Inc.

AT1A-2428

QUICK RELEASE

OUTER DOOR ASSEMBLY

Title:

2/2/2005

D

ECN: ECN 364S

cale: 1:2 Sheet 1 of 1

RP

RP 2/2/2005

ALB 2/2/2005

LATCH MOUNTING PLATE RIGHT HAND3

LATCH MOUNTING PLATE LEFT HAND

Name Date

LATCH HANDLE ASSEMBLY2AT1A-2644-2111111-

OUTER DOOR PANEL 3 PAN LEFT HAND1AT1M-2434-4---1---

OUTER DOOR PANEL 3 PAN RIGHT HAND1AT1M-2434-2-1-----

OUTER DOOR PANEL 6 PAN LEFT HAND1AT1M-2434-3--1--1-

Drawn

Checked

Project Eng

N/A

Material:

N/A

Finish:

1 OUTER DOOR PANEL 6 PAN RIGHT HAND

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

DETAIL A

SCALE 1 : 1

DETAIL B

SCALE 1 : 1

AT1M-3046-11

AT1M-2434-11-1 -- -

PART NUMBER ITEM NO. Description

Angular 1°

Bends: 90

Tolerances:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Comments:

NOTE:

TYP 6 PAN HINGE MOUNTING

AT1A-2428-1

QTY

TYP 3 PAN HINGE MOUNTING

AT1A-2428-2

QTY

AT1A-2428-3

- 1 - 1 1 - - AT1M-3046-2 4

- 1-1-

1

AT1A-2428-7 IS AN INTERIM REPLACEMENT FOR AT1A-2428-1.

APPLY ITEM #10 ON ITEM #7 BEFORE ANY ASSEMBLY.1.

REMOVE ITEM #5 COVER FOR AT1A-2428-5 & -62.

3

PUSH ITEM 12 FIRMLY INTO ITEM 11 UNTIL SUB-FLUSH IN COUNTERSUNK HOLE.

4

1 - - - - - - AT1M-3523-1 13 SPACER, LATCH

1 - - - - - - AT0F-3537-1 12 BARBED PUSH FASTENER

1 - - - - - - AT1A-3536-1 11 LATCH HANDLE ASSEMBLY, INTERIM

1 1 1 1 1 1 1 AT0H-3065-1 10 THREAD LOCKER LIQUID 243

3 3 3 3 3 3 3 AT0F-2691-41011 9 NUT, #10-24 WAXED NYLOC

5 - - 3 5 3 5 AT0F-2061-41140 8 SCREW, #10-24 x 1¾" FLAT HD MACHINE

- 5 5 - - - - AT0F-3480-41166 8 SCREW, #10-24 x 2" DRL SPAN FLT HD MACH

- 4 4 - - - - AT0F-3480-41066 7 SCREW, #10-24 x 3/4" DRL SPAN FLT HD MACH

4 - - 6 4 6 4 AT0F-2061-41060 7 SCREW, #10-24 x ¾" FLAT HD MACHINE

2 2 2 2 2 2 2 AT1M-2689-1 6 HINGE MOUNTING PLATE

2 2 2 2 2 2 2 AT1H-2058-2 5 HINGE, STEAMER DOOR

QTY

AT1A-2428-4

QTY

AT1A-2428-5

QTY

G

AT1A-2428-6

QTY

G

AT1A-2428-7

QTY

I

9

8

I

G

H

B F G

C G

E G

D

4

5

6

1

3

AT1A-2428-2

1

AT1A-2428-4

1

11

13

12

I

3

10

7

5

(SAME AS -2 EXCEPT AS SHOWN)

AT1A-2428-7

OUTER DOOR ASSEMBLY 3 PAN LEFT HAND

4

OUTER DOOR ASSEMBLY 3 PAN RIGHT HAND

(SAME AS -1, EXCEPT AS SHOWN)

OUTER DOOR ASSEMBLY 6 PAN RIGHT HAND

8

6

1

9

3

2

G

06-18-08 DPS/ALB

04-16-08 LRW/ALB

08-09-07 LRW/DDI

05-15-07 GLS/ALB

04-14-06 LEC/ATP

02-28-06 LEC/ATP

04-02-05 RP/ALB

03-02-05 RP

02-10-05 RP/ALB

07-16-04 JAH

5

E

8

7

10

5

2

8

G

AT1A-2428-1 & AT1A-2428-5

OUTER DOOR ASSEMBLY 6 PAN RIGHT HAND

1

4

AT1A-2428-3 & AT1A-2428-6

OUTER DOOR ASSEMBLY 6 PAN LEFT HAND

(SAME AS -1, EXCEPT AS SHOWN)

EVISIONS R

(AT1A-2428-1) ITEM #7, QTY 4 WAS 5; ITEM #8, QTY 5

:

ADDED: AT1A-2428-7; (BOM) ITEMS 11, 12 & 13; NOTES 3 & 4

CHG'D: (BOM, ITEM #9, GROUPS -1, -3, -5 & -6, QTY) 3 WAS 7

RMV'D: (AT1A-2428-1 & -3) ITEM #10

CHG'D

WAS 4; ITEM #9, QTY 7 WAS 3; (AT1A-2428-3) ITEM #7, QTY 4

WAS 5; ITEM #8, QTY 5 WAS 4; ITEM #9, QTY 7 WAS 3 ADDED:

GROUPS AT1A-2428-5 AND -6

CHG'D: AT0F-2961-41011 WAS AT0F-2691-41001

CHG’D: (AT1A-2428-1 & AT1A-2428-3) ITM 10 AT0F-2061-41060

QTY 5 WAS 6, ITM 11 AT0F-2061-41140 QTY 4 WAS 3

CHG’D: NOTE 1, (BOM) ALL ITEM NUMBERS, ITM 2 AT1A-2644-

2 WAS ITM 5 AT1A-2644-1

ADDED: ITEM #13 AND NOTE #1

CHG'D: ITEM # 12 WAS AT0F-2691-41002

EDR-030 RELEASED TO PRODUCTION

RMV'D: OUTER DOOR ASSEMBLY

A

420 I

402 H

364 G

340 F

274 E

262 D

213 C

209 B

ECN REV DESCRIPTION DATE APPR

D

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 17

E

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-2426

INNER DOOR ASSEMBLY

QUICK RELEASE

rawing No.: Rev. D

ECN: 030

6

7

NUT (ITEM #6) TOP SURFACE TO BE

itle: T

02-09-05RP

WELD STUD END

INNER DOOR WELDMENT 3 PAN RIGHT HAND1AT1A-2687-2-1----

INNER DOOR WELDMENT 6 PAN LEFT HAND1AT1A-2687-3--1---

INNER DOOR WELDMENT 3 PAN LEFT HAND1AT1A-2687-4---1--

INNER DOOR WELDMENT 6 PAN RIGHT HAND1AT1A-2687-5----

FLUSH PLUS 1 1/2 ± 1/4 TURNS WITH

15

1 INNER DOOR WELDMENT 6 PAN RIGHT HAND

Name Date

Unless otherwise specified,

Dimensions: Inches

02-09-05

RP

ALB 02-09-05

Drawn

Checked

Project Eng

Material:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Angular 1°

Bends: 90

Tolerances:

D

Size:

N/A

√125 Micro Inches

GD&T Per ANSI Y14.5M

Scale: 1:1 Sheet 1 of 2

N/A

Finish:

Do Not Scale Drawing

Comments:

PART NUMBER ITEM NO. Description

AT1A-2687-11-----

B

7

5

1 1 - - - - AT1G-2633-1 18 INNER DOOR GASKET (6 PAN)

D

4 4 - - - - AT1M-3525-1 17 SPRING, INNER DOOR

D

8 8 - - - - AT0F-3368-2 16 BLIND RIVET

D

D E

2 2 - - - - AT1M-3524-1 14 RETAINER, SIDE DOOR GASKET

D

2 2 - - - - AT1M-3508-1 13 RETAINER, DOOR GASKET

D

2 2 - - - - AT1M-3507-1 12 RETAINER, SIDE SMALL DOOR GASKET

D

C

1 1 - 1 - - AT1M-3466-2 11 BRACKET, DOOR

C

1 1 - - - 1 AT1M-3466-1 10 BRACKET, DOOR

AT1A-2426-1

QTY

AT1A-2426-2

QTY

AT1A-2426-3

QTY

AT1A-2426-4

QTY

AT1A-2426-5

1-

QTY

D

AT1A-2426-6

- - 1 - 1 - AT1G-2633-2 9 INNER DOOR GASKET (3 PAN)

- - - 1 - 1 AT1G-2633-1 8 INNER DOOR GASKET (6 PAN) 28 28 23 28 23 28 AT0F-2691-41011 7 NUT, #10-24 WAXED NYLOC

A

B E

1 1 1 1 1 1 AT1H-2046-1 6 COMPRESSION SPRING

1 1 1 1 1 1 AT1M-3045-1 5 VALVE COVER

1 1 1 1 1 1 AT1A-2427-1 4 VALVE BRACKET ASSY.

2 2 - - - - AT1M-2424-3 3 Z BRACKET, INNER DOOR

3 3 4 5 4 5 AT1M-2424-2 2 Z BRACKET, INNER DOOR

1 - - - - - AT1A-2687-6 1 INNER DOOR WELDMENT 6 PAN LEFT HAND

QTY

D

9

1

AT1A-2426-2

INNER DOOR ASSEMBLY 3 PAN RIGHT HAND

AT1A-2426-4

B

7

2

4

6

B

7

(SAME AS -2 EXCEPT AS SHOWN)

INNER DOOR ASSEMBLY 3 PAN LEFT HAND

B

7

5

C

10

C

AT1A-2426-3

(SAME AS -1 EXCEPT AS SHOWN)

11

INNER DOOR ASSEMBLY 6 PAN LEFT HAND

8

1

AT1A-2426-1

INNER DOOR ASSEMBLY 6 PAN RIGHT HAND

05-02-08 LRW/ALB

04-16-08 LRW/ALB

7-13-06 LEC/ATP

2

B

6

B

7

4

EVISIONS R

CHG'D: (BOM, AT1A-2426-5 & -6) ITEM

#7 QTY 28 WAS 32; DEL: (BOM, AT1A-

2426-5 & -6) ITEM #15 WASAT0F-1052-

53000 QTY 4

CHG'D: NUT (ITEM #6) TOP SURFACE

TO BE FLUSH PLUS 1 1/2 ±1/4 TURNS

WITH WELD STUD END WAS NUT

(ITEM #6) TO BE FLUSH WITH WELD

STUD; ADDED: SHT 2 & AT1A-2426-5 &

-6, (BOM) ITEMS 12 THRU 17

ADDED: ITEM #10 & #11, AT1M-3466-1

& -2 08/09/07 LRW/DDI

CHG’D: (ALL GRPS) ITM 7 AT0F-2691-

41011 WAS AT0F-2691-41001

- EDR-030 RELEASED TO PRODUCTION 02-10-05 RP / ALB

407 E

402 D

364 C

209 A CHG'D: ITEM # 7 WAS AT0F-2691-41002 03/02/05 RP

286 B

ECN REV DESCRIPTION DATE APPR

E

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 18

Rev.Drawing No.:

415 N. Clinton Park 8

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-2426

QUICK RELEASE

NNER DOOR ASSEMBLY

I

Title:

2-09-05

02-09-05

0

RP

ame Date N

RP 02-09-05

ALB

Size:

N/A

D

ECN: 030

Scale: 1:2 Sheet 2 of 2

N/A

NOTE:

Drawn

Checked

Project Eng

Material:

1. PUSH ITEMS 12, 13 AND 14 UP AGAINST THE DOOR

GASKET BEFORE TIGHTENING HOLD-DOWN NUTS.

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

Finish:

Do Not Scale Drawing

omments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

C

10

11

AT1A-2426-6

OTHERWISE SAME AS AT1A-2426-5

INNER DOOR ASSEMBLY 6 PAN LEFT HAND

11

14

2

4

18

1

12

3

10

13

7

3

7

17

16

14

6

12

17

AT1A-2426-5

OTHERWISE SAME AS AT1A-2426-1

INNER DOOR ASSEMBLY 6 PAN RIGHT HAND

13

7

Rev.

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 19

Sheet 1 of 1

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-2427 C

Drawing No.:

EDR: 030

VALVE BRACKET ASSY.

DESCRIPTION

Title:

Date

10/09/03

02/16/04

RP

JAH

Name

N/A

SCREW, #10-24UNC X 3/4 PHILIPS ROUND HEAD MACHINE

Drawn

Proj. Engr.

Checked

ACHIEVED, DO NOT OVER TORQUE ITEM #4

AND SET FIRMLY WITH ITEM #1. ONCE THIS POSITION IS

1. ASSEMBLE ITEM #2 AND ITEM #4 TILL ITEM #4 TOUCHES

NOTE:

6AT0F-2755-410602

PART NO. ITEM

Unless otherwise specified,

Dimensions: Inches

Bends: 90

Tolerances:

Material:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Angular 1°

125 Micro Inches

B

Size:

GD&T Per ANSI Y14.5M

Scale: 1:1

Finish:

Do Not Scale Drawing N/A

Comments:

2 AT0F-2691-41011 5 NUT, #10-24 WAXED NYLOC

4 AT0F-2691-31011 4 NUT, #8-32 WAXED NYLOC

1 AT1M-2734-1 3 DOOR PIN, QUICK RELEASE

4 AT1G-1830-1 2 SEAL, QUICK RELEASE DOOR

1 AT1M-2430-1 1 VALVE BRACKET, QUICK REL. DOOR

QTY.

A

C

1

4

08-07-07 GLS/ALB

03/02/05 RP

AT1A-2427-1

6

2

WAS AT0F-2691-41002

3

AT0F-2691-41011 WAS AT0F-2691-41001

CHG'D: AT0F-2691-31011 WAS AT0F-2691-31001;

CHG'D: ITEM # 4 WAS AT0F-2691-31002, ITEM # 5

5

REVISIONS

- EDR-030 RELEASED TO PRODUCTION 02-10-05 RP ALB

213 B ADDED: NOTE #1 04-02-05 RP / ALB

352 C

209 A

ECN REV DESCRIPTION DATE APPR

C

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 20

Rev.

Sheet 1 of 1

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-3099

PUMP MUFFLER

Drawing No.:

EDR: 124

ASSY, GAST VACUUM

D

Title:

Date

3/22/2006

3/22/2006LRW

ATP

Drawn

LRW

Project Eng

Checked

Name

VACUUM PUMP BRKT, GAST11

SQUARE TUBE MUFFLER ASSEMBLY2AT1A-2984-111

HOSE, Ø¼ SILICONE3AT1P-2558-1511

MOV- TERMINALS ASSEMBLY4AT0A-2736-111

VACUUM PUMP, GAST5AT1E-2991-111

SPACER, HEATER6AT1M-2664-1

Size:

N/A

Material:

Scale: 1:2

N/A

Finish:

Do Not Scale Drawing

Unless otherwise specified,

Dimensions: Inches

Bends: 90

Tolerances:

Angular 1°

2 Place Decimal .02

3 Place Decimal .005

T.I.R .005

STRIP GREEN GROUND WIRE AND ADD SPECIFIED RING TERMINAL.

1

NOTES:

STRIP BLUE & WHITE WIRE LEADS AND ADD SPECIFIED TERMINALS

2

FOR 6 PAN STEAMER WIRING DETAILS SEE SCHEMATIC AT1T-2988.

AND MOV ASSY.

FOR 3 PAN STEAMER WIRING DETAILS SEE SCHEMATIC AT1T-2622.

3

ATTACH LABEL SHOWING "CR3" MARKING TO TOP

4

OF RELAY (AT0E-2825).

MOUNTING TO VACUUM PUMP.

5. APPLY THREAD SEALANT TO 90° ELBOWS BEFORE

Comments:

GD&T Per ANSI Y14.5M

125 Micro Inches

B

AT1M-2993-1 1

PART NUMBER ITEM DESCRIPTION

AT1A-3099-1

QTY

AT1A-3099-2

QTY

C

AR AR AT0H-3102-1 19 PIPE THREAD SEALANT

4 4 AT0F-2691-21002 18 NUT, #6-32 NYLOC

4 4 AT0F-1922-50002 17 WASHER, 1/4" HELICAL SPRING LOCK

4

OBSOLETE USE AT1A-3099-1

4 4 AT0F-1052-51002 16 WASHER 1/4 TYPE B PLAIN

2 2 AT0F-1052-21002 15 WASHER #6 TYPE B PLAIN

4 4 AT0F-2755-51082 14 SCREW, ¼-20UNC X 1 PHILIPS ROUND HEAD MACHINE

2 2 AT0F-2755-21042 13 SCREW, #6-32UNC x 1/2 PHILIPS ROUND HEAD MACHINE

2 2 AT0P-2714-1 12 1/4" HOSE CLAMP

1 1 AT0E-2680-11 11 18-22 AWG INSULATED RING TERMINAL 1/4 STUD

2 2 AT0E-2699-4 10 QD TERMINAL FEMALE INSULATED 14-16 AWG .187 x .020 TAB

1 1 AT0P-2867-2 9 90º ELBOW 1/4 NPT X 1/2 BARB

1 1 AT0P-2867-1 8 90º ELBOW 1/4 NPT X 1/4 BARB

- 1 AT0E-2825-3 7 GENERAL PURPOSE RELAY 208/240V

C

1 - AT0E-2825-2 7 GENERAL PURPOSE RELAY 240VAC

4

2

18

19

3

8

9

12

4

7

3

1

11

18

15

13

10

3

2

AT1A-3099-1 & AT1A-3099-2

4

14

17

16

1

6

5

08-07-07 GLS/ALB

CHG'D: (BOM, ITEM 7) AT0E-2825-3 WAS -1;

OBSOLETED AT1A-3099-2 REPLACE WITH

AT1A-3099-1

10/25/06 LRW/ATP

RMV’D: SHT 2, AT1A-3099-3, AT1A-3099-4,

NOTE 6, NOTE 7, ITM 20 AT0E-2708-1, ITM 21

AT0E-2731-1; CHG’D: NOTE 3 WAS FOR 6

PAN STEAMER WIRING DETAILS SEE

7-3-06 LRW/ATP

REVISIONS

SCHEMATIC AT1T-2988

ADDED: SHT 2, AT1A-3099-3, AT1A-3099-4,

AT0E-2708-1, AT0E-2731-1, (SHT 1) NOTE 6 &

7

352 C

249 B

286 A

ECN REV DESCRIPTION DATE APPR

15

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Pate 21

AT1A-3066-5

E

Rev.Drawing No.:Size:

Sheet 1 of 1

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-3066

HOSE ASSEMBLY

EDR: 021

D

Title:

Date

/4/2005RP 4

RP 4/4/2005

ALB 4/4/2005

Name

N/A

Scale: 1:4

N/A

13

AT1A-3066-4

OTHERWISE SAME AS AT1A-3066-1

PART NUMBER ITEM DESCRIPTION

Project Eng

Drawn

Checked

Unless otherwise specified,

Dimensions: Inches

Bends: 90

Tolerances:

Material:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Angular 1°

Finish:

25 Micro Inches

Do Not Scale Drawing

Comments:

√1

GD&T Per ANSI Y14.5M

AT1A-3066-1

QTY

AT1A-3066-2

QTY

OTHERWISE SAME AS AT1A-3066-1

2 - - - - - - AT1P-2558-18 16 HOSE, Ø½ SILICONE

- - 1 - - - - AT1P-2558-16 15 HOSE, Ø¼ SILICONE

1 - - - - - - AT1P-2558-7 14 HOSE, Ø½ SILICONE

- - - 1 - - - AT1P-2558-21 13 HOSE, Ø¼ SILICONE

- 1 - - - - - AT1P-2558-17 12 HOSE, Ø½ SILICONE

- - - - 1 - - AT1P-2558-14 11 HOSE, Ø¼ SILICONE

- - - - - 1 - AT1P-2558-11 10 HOSE, Ø½ SILICONE

- 3 - - - 3 - AT1P-2558-10 9 HOSE, Ø½ SILICONE

- 1 - - - 1 - AT1P-2558-9 8 HOSE, Ø½ SILICONE

3 6 - - - 6 - AT0P-2714-2 7 1/2" HOSE CLAMP

AT1A-3066-3

QTY

AT1A-3066-4

QTY

C

AT1A-3066-5

QTY

D

AT1A-3066-6

QTY

C

AT1A-3066-7

- - 1 1 1 - 1 AT0P-2868-1 5 PIPE NUT, NPSL

- - 1 1 1 - 1 AT0P-2867-3 4 90º ELBOW 1/8 NPT X 1/4 BARB

- - 1 1 1 - 1 AT0P-2714-1 3 1/4" HOSE CLAMP

- - 1 1 1 - 1 AT0F-2869-1 2 FLAT WASHER

1 2 - - - 2 - AT0P-2987-2 6 BARBED TEE FITTING, 1/2 X 1/2 X 1/2

- - - - - - 1 AT1P-2558-13 1 HOSE, Ø¼ SILICONE

QTY

D

11

AT1A-3066-3

OTHERWISE SAME AS AT1A-3066-1

D E

D

E

D

E

C

E

TO PRESSURE GAGE

C E

B

E

B

E

A B

E

TO CHAMBER

TOP PORT

9

TO PRESSURE

GAGE

9

6

7

TO CHAMBER

BOTTOM PORT

14

AT1A-3066-7

7

16

TO CHAMBER PORT

7

AT1A-3066-2

8

6

B

10

TO PUMP

INLET

9

TO PRESSURE

GAGE

9

16

6

TO PUMP INLET

7

B

1

3

4

2

5

AT1A-3066-1

TO CHAMBER

TOP PORT

8

6

12

9

TO CHAMBER

BOTTOM PORT

AT1A-3066-6

7-3-06 LRW/ATP

12-22-06 LRW/ATP

3-29-06 LRW/ATP

06-17-05 RP / ALB

05-25-05 RP / ALB

REVISIONS

OUTLET

TO MUFFLER

TO PUMP

INLET

ADDED: AT1A-3066-5, AT1A-3066-7, ITM 14

AT1P-2558-7, ITM 15 AT1P-2558-16, ITM 16

AT1P-2558-18

RMV’D: TOP RH VIEW, (AT1A-3066-3, TOP,

CNTR VIEW) BALLOONS 3, 4, 2, 5, CHG’D:

(AT1A-3066-1, AT1A-3066-2, AT1A-3066-3)

VIEW TITLES, ADDED: AT1A-3066-4, AT1A-

3066-6, AT1P-2558-17, AT1P-2558-21

CHG'D: ITEM #1 AT1P-2558-13 WAS AT1P-2558-

12, ITEM #10 AT1P-2558-11 WAS AT1P-2558-13;

ADDED: AT0A-3066-3

CHG'D, AT1P-2558-12 WAS AT1P-2555-1,

CHG’D: (BOM, ITMS 1, 8 - 16) CHANGED PART

DESCRIPTIONS REMOVING CUT LENGTHS

286 D

249 E

267 C

230 B

ADDED AT1A-3066-2

- EDR-021 RELEASED TO PRODUCTION 04-05-05 RP / ALB

220 A

ECN REV DESCRIPTION DATE APPR

J

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 22

Rev.Drawing No.:Size:

Sheet 1 of 2

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

EW

ND HEAD MACHINE

AT1A-2992

EDR: 21

ASSEMBLY STEAMER

COMPONENT BRACKET

D

Title:

Date

/27/2005RP 3

RP 3/27/2005

ALB 3/25/2005

Name

Project Eng

Drawn

Checked

N/A

Material:

Scale: 1:4

N/A

Finish:

Do Not Scale Drawing

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

PART NUMBER ITEM DESCRIPTION

AT1A-2992-1

- AT0E-2825-2 11 GENERAL PURPOSE RELAY 240VAC

4 AT0F-2778-41002 21 NUT, #10-24 UNC-2B HEX MACHINE SCR

6 AT0F-2666-40000 20 WASHER, #10 INTERNAL TOOTH LOCK

2 AT0F-2755-41042 19 SCREW, #10-24UNC X 1/2 PHILIPS ROU

6 AT0F-2755-21042 18 SCREW, #6-32UNC x 1/2 PHILIPS ROUND HEAD MACHINE

2 AT0F-3222-21035 17 SCREW, #6-32UNC x 3/8 PHILLIPS PAN HEAD TYPE F

8 AT0F-2691-21002 16 NUT, #6-32 NYLOC

6 AT0F-1052-21002 15 WASHER #6 TYPE B PLAIN

2 AT0F-2755-21062 14 SCREW, #6-32UNC x 3/4 PHILIPS ROUND HEAD MACHINE

1 AT1E-2654-1 13 PCB, 208/240VAC WATER SENSOR

1 AT0E-2807-1 12 BUZZER

4

6

2

6

2

8

6

2

1

2 AT0E-2825-3 10 GENERAL PURPOSE RELAY 208/240V

2 AT0E-2731-1 9 FUSE 3 AMP 250V

2 AT0E-3162-1 8 FUSE ½ AMP 250V FAST ACTING

-

2

- AT0E-3062-3 6 MARKER STRIP BARRIER BLOCK 6 POS

1 AT0E-2708-2 7 3AG OMNI-BLOK FUSE BLOCK 4 POS

1

1 AT0E-3062-2 5 MARKER STRIP BARRIER BLOCK 5 POS

-

1

- AT0E-1134-6 3 6 POSITION TERMINAL BLOCK

1 AT0E-1134-5 2 5 POSITION TERMINAL BLOCK

1 AT1M-2990-1 1 COMPONENT PLATE

- OBSOLETE - USE AT1A-2992-1

-

1

QTY

AT1A-2992-2

QTY

J

AT1A-2992-4

QTY

ATTACH, APPROXIMATELY AS SHOWN, LABELS SHOWING

"5 3A", "6 3A", "7 0.5A", "8 0.5A", "1", "2", "3", "4", "CR1" & "CR2" MARKINGS.

NOTE:

1

USE 2 OF THE 4 AVAILABLE MOUNTING HOLES, ONE ON EITHER SIDE OF THE BUZZER.

2

AT1A-2992-5

2 2

6 6

2 2

- -

2 2

- -

1 1

- 4

1 1

QTY

J

AT1A-2992-9

A

D

4 4 4

6 6 6

2

6 6 6

2 2 2

8 8 8

6

- - 1

2

-

1 1 1

2

2 2 2

-

1 1 1

-

1

- 1 1

1

1 - -

QTY

J

F

G

F

A

E

B

C

G

A

D

J

C

E

10

D

6

J

3

AT1A-2992-4

AT1A-2992-5

OTHERWISE SAME AS AT1A-2992-1

THERWISE SAME AS AT1A-2992-4 O

18

15

11

J

10

1

E

16

D

AT1A-2992-2

J

AT1A-2992-9

OTHERWISE SAME AS AT1A-2992-1

9

8

D

214

B

15

7

G

G F

AT1A-2992-1

08-07-07 GLS/ALB

05-08-07 GLS/ALB

3/12/07 GLS/ATP

6-15-06 DPS/ATP

08-22-05 GLS/ALB

01-27-06 GLS/ALB

05-19-05 RP / ALB

17

5

F

21

REVISIONS

13

20

12

2

19

D

20

CHG'D FOR ALL GROUPS, AT0F-2755-21062 QTY

2 WAS AT0F-2755-21060 QTY 6, ADDED AT0F-

2775-21042, ADDED TO NOTE 1 MORE LABEL

INFO

- EDR-021 RELEASED TO PRODUCTION 04-05-05 RP / ALB

G

CHG'D: (SHT #1 & #2, ITEM#10) AT0E-2825-3

WAS -1; ADDED: (SHT #1) AT1A-2992-5 & -9, "-

OBSOLETE - USE AT1A-2992-1" TO AT1A-2992-2;

(SHT #2) AT1A-2992-8, "- OBSOLETE - USE

AT1A-2992-6" TO AT1A-2992-7

CHG'D: ITEM #17 AT0F-3222-21035 WAS AT0F-

3222-21030, ITEM #20 AT0F-2666-40000 WAS

AT0F-1922-40002;ADDED SHEET 2

CHG’D: (TOP VIEW) NOTE WAS WATER SENSOR

BOARD & POWER GROUND WIRE HOLES; ADD:

ITMS 19 THRU 21; (TOP VIEW) NOTE POWER

CABLE GROUND POINT

RMV'D: (ASSEMBLY) AT1A-2992-3, ITM 16 AT0F-

2691-21002, AT1A-2992-3; CHG’D: ITM 17 AT0F-

3222-21030 NOW MOUNTED FROM TOP SIDE;

CHG’D: ALL VIEW TITLES (REMOVED 6 PAN),

(VIEW TITLE AT1A-2992-1) 208V 1 & 3 PHASE,

380V, 415V, 440V & 480V 3 PHASE WAS 6PAN,

208V, 1 & 3 PHASE; (BOM) ITM 12 AT0E-2807-1

WAS AT1E-BT; ADDED: FLAG NOTE 2

CHG'D: AT0F-3222- 21030 WAS AT0F-2773-21030,

AT0E-3162-1 WAS AT0E-2731-3

CHG'D: IN BM, AT0F-1052-21002 QTY FOR ALL

GROUPS, QTY 6 WAS 4

352 J

355 H ADDED: (SHT 2, BOM) ITEMS 19 & 20 07-12-07 GLS/ALB

340 G

329 F

284 D

238 B

256 C

220 A

ECN REV DESCRIPTION DATE APPR

J

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 23

Rev.Drawing No.:Size:

Sheet 2 of 2

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

ND HEAD MACHINE

D HEAD MACHINE

AT1A-2992

ECN:

ASSEMBLY STEAMER

COMPONENT BRACKET

D

Title:

Date

/27/2005RP 3

RP 3/27/2005

ALB 3/25/2005

Name

Project Eng

Drawn

Checked

N/A

Material:

Scale: 1:2

N/A

Finish:

NOTE:

A

ATTACH, APPROXIMATELY AS SHOWN, LABELS SHOWING

"5 3A", "6 3A", "7 0.5A", "8 0.5A", "1", "2", "3", "4", "CR1" & "CR2" MARKINGS.

1

USE 2 OF THE 4 AVAILABLE MOUNTING HOLES, ONE ON EITHER SIDE OF THE BUZZER.

2

D

11

Do Not Scale Drawing

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

PART NUMBER ITEM DESCRIPTION

AT1A-2992-6

- AT0E-2825-2 11 GENERAL PURPOSE RELAY 240VAC

2 AT0E-2825-3 10 GENERAL PURPOSE RELAY 208/240V

2 AT0E-2731-1 9 FUSE 3 AMP 250V

2 AT0E-3162-1 8 FUSE ½ AMP 250V FAST ACTING

4 AT0F-2666-40000 20 WASHER, #10 INTERNAL TOOTH LOCK

2 AT0F-2755-41042 19 SCREW, #10-24UNC X 1/2 PHILIPS ROU

6 AT0F-2755-21042 18 SCREW, #6-32UNC x 1/2 PHILIPS ROUND HEAD MACHINE

2 AT0F-3222-21035 17 SCREW, #6-32UNC x 3/8 PHILLIPS PAN HEAD TYPE F

4

2

6

2

6 AT0F-1052-21002 15 WASHER #6 TYPE B PLAIN

2 AT0F-2755-21062 14 SCREW, #6-32UNC x 3/4 PHILIPS ROUN

1 AT1E-2654-1 13 PCB, 208/240VAC WATER SENSOR

1 AT0E-2807-1 12 BUZZER

-

6

2

1

2

1 AT0E-2708-2 7 3AG OMNI-BLOK FUSE BLOCK 4 POS

2

1

1 AT0E-3062-2 5 MARKER STRIP BARRIER BLOCK 5 POS

1

1 AT0E-1134-5 2 5 POSITION TERMINAL BLOCK

1 AT1M-2990-2 1 COMPONENT PLATE

- OBSOLETE - UES AT1A-2992-6

1

QTY

AT1A-2992-7

QTY

J

AT1A-2992-8

- 21

4

2

6

H

H G

2

G

- 16

6

-

2

-

2

1

J

2

- 6

1

- 4

1

- 3

1

QTY

J

AT1A-2992-7

OTHERWISE SAME AS AT1A-2992-6

18

15

J

10

1

FRONT HEATER WIRE

F

TIE HOLES

1

H

9

8

215

14

17

19

7

5

AT1A-2992-6

J

POWER CABLE GROUND POINT

AT1A-2992-8

OTHERWISE SAME AS AT1A-2992-6

REAR HEATER WIRE

TIE HOLES

20

H

12

2

13

F

WATER SENSOR

BOARD GROUND POINT

C

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 21

Page 24

Rev

Sheet 1 of 3

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-3472

rawing No. D

ECN: 352

MODULE, VOLTAGE

ATTAGE PHASE W

E

Title

Date

8/2/2007

LS

ame N

GLS

ALB

G

rawn

Checked

Project Eng

D

Size

N/A

Material:

Scale: 1:4

/A N

Finish:

PART NUMBER ITEM DESCRIPTION

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Angular 1°

Dimensions: Inches

Bends: 90

Tolerances:

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

AT1A-3472-1

QTY

AT1A-3472-4

QTY

AT1A-3472-5

QTY

AT1A-3472-6

QTY

AT1A-3472-7

QTY

AT1A-3472-8

QTY

AT1A-3472-11

QTY

AT1A-3472-12

QTY

B

AT1A-3472-14

QTY

AT1A-3472-15

QTY

AT1A-3472-22

QTY

AT1A-3472-25

QTY

AT1A-3472-28

QTY

AT1A-3472-29

QTY

AT1A-3472-30

QTY

AT1A-3472-31

QTY

AT1A-3472-32

QTY

AT1A-3472-33

QTY

AT1A-3472-36

QTY

AT1A-3472-37

QTY

B

AT1A-3472-39

QTY

AT1A-3472-40

QTY

AT1A-3472-41

QTY

AT1A-3472-43

QTY

- - - - - - - - - - - - - - - - 1 1 1 1 1 1 1 1 1 1 1 AT1L-2624-1 24 LABEL STEAMER LEGS

- - - 1 1 1 - - - - 1 - - - - - - - - - - - - - - - - AT1A-2806-3 23 PALLET BUILD STEAMER 6 PAN INTL

1 1 1 - - - 1 1 1 1 - 1 1 1 1 1 - - - - - - - - - - - AT1A-2806-2 23 PALLET BUILD STEAMER 6 PAN

- - - - - - - - - - - - - - - - 1 1 1 1 1 1 1 1 1 1 1 AT1A-2806-1 23 PALLET BUILD STEAMER 3 PAN

- - - - - - - - - - - - - - - - 4 - - - - - - - - - - AT0F-2755-41042 22 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD MACHINE

AT1A-3472-47

QTY

AT1A-3472-51

QTY

AT1A-3472-52

- - - 2 2 2 - - - - 2 - - - - - - 2 2 - - - 2 - - - - AT0H-3385-1 19 WASHER, 1.00 TO .75 CUPPED REDUCING

4 4 4 - - - - - - - - - - - - - 7 - - - - - - - - - - AT0F-2691-41002 20 NUT, #10-24 NYLOC

4 4 4 - - - - - - - - - - - - - 7 - - - - - - - - - - AT0F-1052-41002 21 WASHER #10 TYPE B PLAIN

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 AT0E-2680-5 18 10-12 AWG INSULATED RING TERMINAL #10 STUD

AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AT0H-3412-1 17 WAKEFIELD 120 THERMAL JOINT COMPOUND

- - - 1 1 1 - - - - 1 - - - - - - 1 1 - - - 1 - - - - AT1L-3116-2 16 TAG, STEAMER DATA

1 1 1 - - - 1 1 1 1 - 1 1 1 1 1 1 - - 1 1 1 - 1 1 1 1 AT1L-3116-1 16 TAG, STEAMER DATA

2 2 2 2 2 2 - - - - - - - - - - 2 2 2 - - - - - - - - AT0A-2736-4 15 MOV- TERMINALS ASSEMBLY

2 2 2 2 2 2 4 4 4 3 3 4 4 4 4 3 2 2 2 4 4 3 3 4 4 4 3 AT0A-2736-2 15 MOV- TERMINALS ASSEMBLY

- - - - - - - - - - - 1 - - - - - - - - - - - - - - - AT0A-3473-5 14 STEAMER WIRING HARNESS 6 PAN

- - - - - - - - - - - - - - - - 1 - - - - - - - - - - AT0A-3474-4 14 STEAMER WIRING HARNESS 3-PAN

- - - - - - - - - - - - - - - - - - 1 - - - - - - - - AT0A-3474-3 14 STEAMER WIRING HARNESS 3-PAN

- - - - - - - - - - - - - - - - - 1 - - 1 - - 1 1 1 - AT0A-3474-2 14 STEAMER WIRING HARNESS 3-PAN

- - - - - - - - - - - - - - - - - - - 1 - 1 1 - - - 1 AT0A-3474-1 14 STEAMER WIRING HARNESS 3-PAN

- - 1 - - - - - - - - - - - - - - - - - - - - - - - - AT0A-3473-4 14 STEAMER WIRING HARNESS 6 PAN

- - - - - 1 - - - - - - - - - - - - - - - - - - - - - AT0A-3473-3 14 STEAMER WIRING HARNESS 6 PAN

1 1 - 1 1 - 1 1 1 1 - - 1 1 1 - - - - - - - - - - - - AT0A-3473-2 14 STEAMER WIRING HARNESS 6 PAN

- - - - - - - - - - 1 - - - - 1 - - - - - - - - - - - AT0A-3473-1 14 STEAMER WIRING HARNESS 6 PAN

- - - - - - - - - - - 1 - - - - - - - - - - - - - - - AT1A-2511-5 13 HEAT SINK ASSY, TRIPLE SSR

- - - - - - - - - 1 1 - - - - 1 - - - - - 1 1 - - - 1 AT1A-2511-1 13 HEAT SINK ASSY, SINGLE SSR

- - - - - - - - - - - 1 - - - - - - - - - - - - - - - AT1E-3361-7 12 CAST ALUM HEATER ASSEMBLY

- - - - - - - - - - - - - 1 - - - - - - - - - - 1 - - AT1E-3361-6 12 CAST ALUM HEATER ASSEMBLY

- - - - - - - - - - - - - - - - - - - - - - - - - - - AT1E-3361-5 12 CAST ALUM HEATER ASSEMBLY

1 1 1 1 1 1 1 1 1 - - - 1 1 1 - 1 1 1 1 1 - - 1 1 1 - AT1A-2511-2 13 HEAT SINK ASSY, DOUBLE SSR

- 1 - 1 - - 1 - - - - - 1 - - - - - - - - - - 1 - - - AT1E-3361-4 12 CAST ALUM HEATER ASSEMBLY

1 - - - 1 - - 1 - - - - - - 1 - - 1 - 1 - - - - - 1 - AT1E-3361-3 12 CAST ALUM HEATER ASSEMBLY

- - - - - - - - - 1 - - - - - - - - - - - 1 - - - - - AT1E-3361-2 12 CAST ALUM HEATER ASSEMBLY

- - 1 - - 1 - - 1 - 1 - - - - 1 1 - 1 - 1 - 1 - - - 1 AT1E-3361-1 12 CAST ALUM HEATER ASSEMBLY

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AT0E-2559-2 11 TEMPERATURE CONTROLLER

- - - - - - - - - - - - - - - - 1 - - - - - - - - - - AT1T-3452-4 10 SCHEMATIC, 3 PAN CAST IN HEATER

- - - - - - - - - - - - - - - - - 1 1 - - - - - - - - AT1T-3452-3 10 SCHEMATIC, 3 PAN CAST IN HEATER

- - - - - - - - - - - - - - - - - - - 1 1 - - 1 1 1 - AT1T-3452-2 10 SCHEMATIC, 3 PAN CAST IN HEATER

- - - - - - - - - - - - - - - - - - - - - 1 1 - - - 1 AT1T-3452-1 10 SCHEMATIC, 3 PAN CAST IN HEATER

- - - - - - - - - - - 1 - - - - - - - - - - - - - - - AT1T-3403-5 10 SCHEMATIC, STEAMER 6 PAN (CAST IN HEATER)

- - - 1 1 1 - - - - - - - - - - - - - - - - - - - - - AT1T-3403-3 10 SCHEMATIC, STEAMER 6 PAN (CAST IN HEATER)

- - - - - - 1 - 1 - - - 1 1 1 - - - - - - - - - - - - AT1T-3403-2 10 SCHEMATIC, STEAMER 6 PAN (CAST IN HEATER)

- - - - - - - 1 - 1 1 - - - - 1 - - - - - - - - - - - AT1T-3403-1 10 SCHEMATIC, STEAMER 6 PAN (CAST IN HEATER)

1 1 1 - - - - - - - - - - - - - - - - - - - - - - - - AT1T-3403-4 10 SCHEMATIC, STEAMER 6 PAN (CAST IN HEATER)

- - - - - - - - - - - - - - - - 1 - - - - - - - - - - AT1M-2645-1 9 TRANSFORMER SUPPORT

1 1 1 - - - - - - - - - - - - - 1 - - - - - - - - - - AT0E-2662-1 8 TRANSFORMER

- - - - - - 1 - - - - 1 - - - - - - - - - - - - - - - AT1M-2979-2 7 EXTERIOR SHELL (6 PAN)

- - - - - - - - - - - - - - - - 1 1 1 1 1 1 1 1 1 1 1 AT1A-2603-1 7 ASSY, BOTTOM SHELL 3 PAN

1 1 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - - - - - - - - - - - AT1M-2979-1 7 EXTERIOR SHELL (6 PAN)

1 1 - 1 - - 1 - - - - 1 - - - - - - - - - - - - - - - AT1A-3295-4 6 PRESSURE SWITCH ASSY 6-PAN DOUBLE

- - 1 - 1 1 - 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AT1A-3295-2 6 PRESSURE SWITCH ASSY

- - - - - - 1 - - - - 1 - - - - - - - - - - - - - - - AT0E-2086-4 5 CORD GRIP LOCKNUT

1 1 1 - - - - 1 1 1 - - 1 1 1 1 1 - - 1 1 1 - 1 1 1 1 AT0E-2086-3 5 CORD GRIP LOCKNUT

- - - 1 1 1 - - - - 1 - - - - - - 1 1 - - - 1 - - - - AT0E-3384-1 4 STRAIN RELIEF, 3/4 NPT LIQUID TIGHT

- - - - - - - - - - - 1 - - - - - - - - - - - - - - - AT0E-1049-6 3 1¼" STRAIN RELIEF

1 1 1 - - - - - 1 1 - - - - 1 1 1 - - - 1 1 - - - 1 1 AT0E-1049-5 3 1" STRAIN RELIEF

- - - - - - - 1 - - - - 1 1 - - - - - 1 - - - 1 1 - - AT0E-1049-4 3 1" STRAIN RELIEF

- - - - - - 1 - - - - - - - - - - - - - - - - - - - - AT0E-1049-1 3 1¼" STRAIN RELIEF

- - - - - - - - - - 1 - - - - - - - - - - - 1 - - - - AT0A-2788-21 2 POWER CABLE ASSY

- - - 1 1 1 - - - - - - - - - - - 1 1 - - - - - - - - AT0A-2788-20 2 POWER CABLE ASSY

- 1 - - - - - - - - - - - - - - - - - - - - - - - - - AT0A-2788-14 2 POWER CABLE ASSY

1 - 1 - - - - - - - - - - - - - 1 - - - - - - - - - - AT0A-2788-13 2 POWER CABLE ASSY

- - - - - - 1 - - - - - - - - - - - - - - - - - - - - AT0A-2788-12 2 POWER CABLE ASSY

- - - - - - - - - - - 1 - - - - - - - - - - - - - - - AT0A-2788-10 2 POWER CABLE ASSY

- - - - - - - - - - - - 1 - - - - - - - - - - 1 - - - AT0A-2788-9 2 POWER CABLE ASSY

- - - - - - - 1 - - - - - 1 - - - - - 1 - - - - 1 - - AT0A-2788-8 2 POWER CABLE ASSY

- - - - - - - - 1 - - - - - 1 - - - - - 1 - - - - 1 - AT0A-2788-5 2 POWER CABLE ASSY

- - - - - - - - - 1 - - - - - 1 - - - - - 1 - - - - 1 AT0A-2788-4 2 POWER CABLE ASSY

1 1 1 1 1 1 1 1 1 1 1 - 1 1 1 1 - - - - - - - - - - - AT1A-2992-9 1 COMPONENT BRACKET ASSY

- - - - - - - - - - - - - - - - 1 1 1 1 1 1 1 1 1 1 1 AT1A-2992-8 1 COMPONENT BRACKET ASSY

- - - - - - - - - - - 1 - - - - - - - - - - - - - - - AT1A-2992-5 1 COMPONENT BRACKET ASSY

QTY

C

GLS

GLS/ALB06-06-08

01-15-08

2788-13 WAS AT0A-2788-14

ITEM #18 (AT0E-2680) TERMINALS TO BE USED FOR TERMINATION OF ITEM #12 (AT1E-3361) HEATER WIRES.

SEE AT1A-3470 BOM, 6 PAN FINAL FOR 6 PAN STEAMER COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.

NOTES:

1. SEE AT1A-3471 BOM, 3 PAN FINAL FOR 3 PAN STEAMER COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.

2.

REFERENCE AT1T-3067 FOR STEAMER ELECTRICAL SPEC'S.

3.

4

APPLY ITEM #17 (AT0H-3412) JOINT COMPOUND EVENLY ONTO ITEM #12 (AT1E-3361) CAST HEATER,

5

COMPLETELY COVERING THE SURFACE THAT WILL BE IN CONTACT WITH THE CHAMBER BOTTOM.

APPLY ITEM #25 (AT1L-2624-1) LABEL TO ITEM #7 (AT1M-2603) BOTTOM SHELL 3 PAN APPROXIMATELY

6

.25" FROM THE CONTROL PANEL SIDE AND 9.00" BACK FROM THE FRONT. ORIENT THE LABEL SO THAT THE

TEXT CAN BE READ FROM THE LEFT SIDE OF THE STEAMER IN ITS NORMAL UPRIGHT POSITION.

CHG'D: (BOM, AT1A-3472-52, ITEM 2) AT0A-

ADDED: GROUPS AT1A-3472-12 AND -37

REMOVED: (GROUPS) AT1A-3472-13 & -387;

B

C

APPRDATEDESCRIPTIONREVECN

GLS/ALB

08-25-07RELEASED TO PRODUCTION

REVISIONS

A352

417

389

13

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 25

C

Rev

Sheet 3 of 3

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-3472

MODULE, VOLTAGE

WATTAGE PHASE

Drawing No.

ECN: 352Scale: 1:4

E

Title

8/2/2007

ALB

GLS

Name Date

GLS

Size

N/A

5

Checked

Material:

Project Eng

Drawn

Finish:

7

11

17

12

10

DETAIL B

SCALE 1 : 2

Unless otherwise specified,

Dimensions: Inches

Bends: 90

Tolerances:

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Angular 1°

√125 Micro Inches

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

Comments:

GROUPS 32, 40, 41, 43

16

PLEASE NOTE ORIENTATION,

4

6 PAN STEAMER CONFIGURATION

18

B

19

6

23

BOTH PARTS ARE MOUNTED IN THE SAME DIRECTION

4

2

15

1

10

13

23

5

11

8

17

12

21

20

7

6

5

6 PAN STEAMER CONFIGURATION

GROUPS 25, 38-31, 33, 36, 38, 39, 47, 51, 52

4

18

16

3

15

2

1

15

C

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 26

Rev

Sheet 2 of 3

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-3472

MODULE, VOLTAGE

WATTAGE PHASE

Drawing No.

ECN: 352Scale: 1:4

E

Title

8/2/2007

ALB

GLS

Name Date

GLS

Size

N/A

Checked

Material:

Project Eng

Drawn

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Angular 1°

Dimensions: Inches

Bends: 90

Tolerances:

Finish:

Do Not Scale Drawing

Comments:

√125 Micro Inches

GD&T Per ANSI Y14.5M

DETAIL A

SCALE 1 : 2

GROUPS 7, 14, 15

3 PAN STEAMER CONFIGURATION

OTHERWISE SAME AS GROUPS 1, 4-6, 8, 9, 11, 13, 22

A

19

4

PLEASE NOTE ORIENTATION,

BOTH PARTS ARE MOUNTED IN THE SAME DIRECTION

10

5

17

13

12

11

20

5

9

4

16

22

21

8

18

GROUPS 1, 4-6, 8, 11, 13, 22

24

3 PAN STEAMER CONFIGURATION

6

23

20

7

15

1

15

3

2

RELAY CR3

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 27

TERMINAL #6

D

Rev.Drawing No.:Size:

Sheet 1 of 1

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-2511

TIMER

TERMINAL #2

THERMOSTAT

2

TERMINAL #5

7

AT1A-2511-3

HEAT SINK ASSY

EDR: 088

D

Title:

-22-05GLS

Date

3

ATP 3-22-05

Name

Unless otherwise specified,

Dimensions: Inches

GLS 3-22-05

Project Eng

Drawn

Checked

2 Place Decimal .02

Angular 1°

Bends: 90

Tolerances:

N/A

Material:

25 Micro Inches

T.I.R .005

√1

3 Place Decimal .005

GD&T Per ANSI Y14.5M

Scale: 1:1.5

N/A

Finish:

Do Not Scale Drawing

Comments:

2

OTHERWISE SAME AS AT1A-2511-1

NOTES:

1. ITEM 9, PAD, SSR HEAT SINK CAN BE SUBSTITUTED WITH HEAT SINK COMPOUND

4

PART NO. ITEM DESCRIPTION

SSR1

A

QTY AT1A-2511-1

QTY AT1A-2511-2

A

SSR2

QTY AT1A-2511-3

TIMER

TERMINAL #2

THERMOSTAT

TERMINAL #5

RELAY CR3

TERMINAL #6

QTY AT1A-2511-5

- - 1 - AT0A-1454-5 6 WIRE HARNESS ASSY, DOUBLE SSR ORANGE

1 - - - AT0A-1454-8 13 WIRE HARNESS ASSY

1 - - - AT0A-1454-7 12 WIRE HARNESS ASSY

SSR3

A

6 6 4 2 AT0F-2755-31030 10 SCREW, #8-32UNC X 3/8 PHILIPS ROUND HEAD MACHINE

6 6 4 2 AT0F-2666-30000 11 WASHER, #8 INTERNAL TOOTH LOCK

1 1 - - AT0A-1454-6 7 WIRE HARNESS ASSY, TRIPLE SSR ORANGE

3 3 2 1 AT0E-2059-3 8 RELAY, SOLID STATE

3 3 2 1 AT0E-2996-1 9 PAD, SSR HEAT SINK

- - - 1 AT0A-1454-4 5 WIRE HARNESS ASSY, SINGLE SSR ORANGE

1 1 - - AT0A-1454-3 4 WIRE HARNESS ASSY, TRIPLE SSR WHT/BRN

- - 1 - AT0A-1454-2 3 WIRE HARNESS ASSY, DOUBLE SSR WHT/BRN

- 1 1 1 AT0A-1454-1 2 WIRE HARNESS ASSY, ALL SSR WHT/BRN

1 1 - - AT0E-2206-2 1 HEAT SINK, 10.50" LONG

- - 1 1 AT0E-2206-1 1 HEAT SINK, 7.00" LONG

C

AT1A-2511-2

RELAY CR3

TERMINAL #6

TIMER

OTHERWISE SAME AS AT1A-2511-1

TERMINAL #2

2

6

A

7

3

THERMOSTAT

TERMINAL #5

12

THERMOSTAT

TERMINAL #5

RELAY CR3

TERMINAL #6

SWITCH

PRESSURE

SSR1

A

C

AT1A-2511-5

SSR2

A

4

OTHERWISE SAME AS AT1A-2511-1

PRESSURE

SWITCH

13

SSR 1

TIMER

TERMINAL #2

5

2

AT1A-2511-1

SSR 2

SSR 3

05-08-07 GLS/ALB

04-22-05 RP/ALB

10

11

8

A

9

1

A

EVISIONS R

THERMOSTAT TERMINAL #4

THERMOSTAT TERMINAL #5 WAS

#2 WAS THERMOSTAT TERMINAL #5;

CHG'D: (AT1A-2511-1 & -2) TIMER TERMINAL

281 B UPDATED PICTORIALLY 08-22-06 GLS/ALB

325 C ADDED: AT1A-2511-5 02-09-07 LRW/ALB

340 D

SSR3, THIS SURFACE UP

8 AT0E-2059-3 SSR ON ITM 1 AT0E-2206-1,

ADDED, 31" LONG, 12" LONG, SSR1, SSR2,

CHG’D: (AT1A-2511-1) MNTG LOCATION OF ITM

220 A

ECN REV DESCRIPTION DATE APPR

C

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 28

Rev.

Sheet 1 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

MODULE,

SPECIAL OPTION

Drawing No.:

Title:

Date

10/10/2006

ATP

GLS

LRW 10/10/2006

Name

Drawn

Checked

Project Eng

Size:

N/A

Material:

Finish:

C

ECN: 328

Scale: 1:1

N/A

AT1T-3079

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Comments:

LEG CONFIGURATION

R/L CONFIGURATION

CONFIGURATION

THERMOSTAT

TIMER CONFIGURATION

B

(WATT)

ENERGY INPUT

CONTROL SERIES

PHASE / FRENQUENCY

SUPPLY VOLTAGE

FOR THE 14TH MODEL STRING DIGIT IN THE AT1T-2611

DETAILED PRODUCT SPECIFICATION DRAWING

STEAMER MODEL STRING CONFIGURATION

MODULE, SPECIAL OPTION

0 = Drain Pan Rails

4 = Prison Specs (6 Pan Only)

2 = Maritime Specs (6 Pan Only)

5 = 4" Legs with Bullet Feet

BASE MODEL

S 6 2 0 8 3 D 0 8 0 3 0 0 0

MODEL

STRING

1 2 3 4 5 6 7 8 9 10 11 12 13 14

DIGIT:

APPRDATEDESCRIPTIONREVECN

08/15/07 GLS/DDI

06-30-08 DPS/ALB

06-05-07 GLS/ALB

REVISIONS

CHG'D: (SHT 4, BOM) AT0F-3448-51066 WAS

AT0F-3448-51056

CHG'D: (MODEL STRING DIGIT 11) 3 WAS 1

ADDED: (AT1T-3079-4 BOM) SHEET #4

CHG'D: (SHT 2 & 5) AT0F-2875-51050 WAS

AT0F-2875-51051, SHT 1,3 MARITIME WAS

NAVY

C423

364 B

340 A

328 RELEASED TO PRODUCTION 10/10/06 GLS/ATP

C

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 29

Rev.

Sheet 2 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

MODULE,

SPECIAL OPTION

Drawing No.:Size:

Title:

Date

10/10/2006

ATP

GLS

LRW

Name

Drawn

Checked 10/10/2006

N/A

Material:

Project Eng

ECN: 328Scale: 1:4

C

N/A

Finish:

AT1T-3079

4 AT0F-2875-51050 3 SCREW, 1/4-20UNC X 5/8 HEX HEAD MACHINE

4 AT0F-1922-50000 2 WASHER, 1/4" HELICAL SPRING LOCK

A

2 AT1M-2872-1 1 DRAIN PAN BRACKET

QTY

PART NUMBER ITEM DESCRIPTION

AT1T-3079-0

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Comments:

1

AT1T-3079-0

2

3

INSTALLATION OF DRAIN PAN RAILS TO STEAMER ASSEMBLY

(3 PAN STEAMER SHOWN, 6 PAN STEAMER IS THE SAME)

SPECIAL CONFIGURATION 0

DESCRIPTION

Drain Pan Rails•

Add Drain Pan Rails Only (No Bullet Feet)•

MODIFICATIONS:

C

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 30

Rev.

Sheet 4 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

MODULE,

SPECIAL OPTION

Drawing No.:Size:

Title:

Date

10/10/2006

ATP

GLS

LRW

Name

Drawn

Checked 10/10/2006

PACK ITEM 4 INTO THE BAG SHOWN ON AT1A-3387.

1

NOTES:

N/A

Material:

Project Eng

ECN: 328Scale: 1:1

C

N/A

Finish:

AT1T-3079

AT1A-3377 MODULE

PAN RACK SOLID

8 AT0F-3448-51066 7 SCREW, 1/4-20 x 3/4" DRL SPAN PAN HD MACH

C

4 AT0H-3040-1 4 RUBBER BULLET FOOT TIP

8 AT0F-1922-50000 3 WASHER, 1/4" HELICAL SPRING LOCK

1 AT1A-3038-1 2 LEG BASE RIGHT ASSEMBLY

1 AT1A-3038-2 1 LEG BASE LEFT ASSEMBLY

PART NUMBER ITEM DESCRIPTION

B

√125 Micro Inches

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

T1T-3079-4

A

Angular 1°

Bends: 90

Tolerances:

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

Comments:

QTY

AT1A-3079-4 MODULE

DRAIN PAN RAILS

2

C

3

7

AT1T-3079-4

AT1A-3377 MODULE

SCREWS, TAMPER

PROOF TRUSS HEAD

1

4

1

SOME COMPONENTS ARE REMOVED FOR CLARITY

SPECIAL CONFIGURATION 4

DESCRIPTION

Tamper Proof Screw, (2) Pan Rack Solid•

Add 4" Legs with Bullet Feet (No Separate Drain Pan Rails)•

MODIFICATIONS:

C

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 31

Rev.

Sheet 5 of 5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

MODULE,

SPECIAL OPTION

Drawing No.:Size:

Title:

Date

10/10/2006

ATP

GLS

LRW

Name

Drawn

Checked 10/10/2006

PACK ITEM 4 INTO THE BAG SHOWN ON AT1A-3387.

1

NOTES:

N/A

Material:

Project Eng

ECN: 328Scale: 1:4

C

N/A

Finish:

AT1T-3079

8 AT0F-2875-51050 5 SCREW, 1/4-20UNC X 5/8 HEX HEAD MACHINE

4 AT0H-3040-1 4 RUBBER BULLET FOOT TIP

A

8 AT0F-1922-50000 3 WASHER, 1/4" HELICAL SPRING LOCK

1 AT1A-3038-1 2 LEG BASE RIGHT ASSEMBLY

1 AT1A-3038-2 1 LEG BASE LEFT ASSEMBLY

QTY

PART NUMBER ITEM DESCRIPTION

AT1T-3079-5

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Comments:

2

1

4

AT1T-3079-5

1

3

5

INSTALLATION OF FEET TO STEAMER ASSEMBLY

(3 PAN STEAMER SHOWN, 6 PAN STEAMER IS THE SAME)

SPECIAL CONFIGURATION 5

DESCRIPTION

4" Legs with Bullet Feet•

Add 4" Legs with Bullet Feet (No Separate Drain Pan Rails)•

MODIFICATIONS:

D

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 31

Rev.Drawing No.:

Sheet 1 of 1

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-3030

EDR: 078

B

LEG BASE ASSEMBLY KIT

Title:

Date

01-13-05

01-14-05

RP

ALB

Name

C

Size:

N/A

Scale: 1:4

N/A

Drawn

Material:

Project Eng

Checked

Finish:

ITEM #4 AND #5 TO BE INSERTED INTO ITEM #3.1.

NOTE:

THEN INSERT ITEM #1, #2, #3, #7 AND #9 INTO ITEM #8

AND SEAL WITH TAPE.

D

6

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Angular 1°

Dimensions: Inches

Bends: 90

Tolerances:

125 Micro Inches

GD&T Per ANSI Y14.5M

Comments:

PART NUMBER ITEM DESCRIPTION

AT1A-3030-1

1 AT1T-3058-1 9 INSTALLATION INSTRUCTIONS, LEG BASE ASSY

1 AT0S-3039-1 8 CARDBOARD BOX 19½ X 7¼ X 4 3/8

4 AT0H-3040-1 7 RUBBER BULLET FOOT TIP

4 AT0F-1922-50002 5 WASHER, 1/4" HELICAL SPRING LOCK

4 AT0F-2875-51062 4 SCREW, 1/4-20UNC X 3/4 HEX HEAD MACHINE

1 AT0H-2782-1 3 BAG, 3 X 5 RECLOSABLE

1 AT1A-3038-2 2 LEG BASE LEFT ASSEMBLY

1 AT1A-3038-1 1 LEG BASE RIGHT ASSEMBLY

QTY

3

8

A

C

7

B

9

1

2

5

4

AT1A-3030-1

LEG ASSEMBLY KIT

9/18/2006 DPS/ALB

11/28/2006 GLS/ATP

REVISIONS

CHG’D: ITM 9 DESCRIPTION WAS

INSTALLATION INSTRUCTIONS, 6 PAN

STEAMER FEET

RMV'D: AT1A-3030-2 (REPLACE WITH AT1A-

3030-1 BOTTOM AIR VENT CONFIGURATION)

- EDR-081 RELEASED TO PRODUCTION 1/13/05 RP / ALB

208 A ADDED: ITM 10, AT1T-3058-1 TO ALL GPS 2/28/2005 GLS/ATP

332 D RMV'D: ITM 6 ATP-LABEL2; CHG'D: NOTE 1 4/16/2007 DPS/ATP

298 B

249 C

ECN REV DESCRIPTION DATE APPR

A

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 32

Rev.

Sheet 1 of 1

10

4

5

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

AT1A-3463

ECN: 422Scale: 1:1

KIT, STEAMER DRAIN

Drawing No.:Size:

Title:

Date

5/1/2008

GLS

Name

GLS

N/A

Drawn

Checked 5/1/2008

Material:

Project Eng

C

N/A

Finish:

2

1 13 AT1M-3521-1 TRAY, CONDENSATE

1 12 AT0P-3481-1 ELBOW, 90º NPT TO BEADED HOSE BARB

1 11 AT0P-3478-1 ELBOW, 90° 1/8 NPTF TO 1/4 HOSE BARB

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Angular 1°

Dimensions: Inches

Bends: 90

Tolerances:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Comments:

ITEM PART NUMBER DESCRIPTION

AT0A-3463-1

1 10 AT0P-3488-1 ELBOW, 90° HOSE BARBED 3/4x3/4

2 9 AT0P-2714-1 1/4" ID HOSE CLAMP

4 8 AT0P-2714-3 3/4" ID HOSE CLAMP

1 7 AT1P-2558-22 SILICONE HOSE, 1/4"Øx3.0" LG

1 6 AT0P-2628-1 FITTING, 90° ELBOW, 1/4" NPTM TO 1/4" HOSE BARB

1 5 AT1M-3483-1 BRACKET, HANGER

1 4 AT0H-2576-3 GROMMET, 1½" NYLON

1 3 AT0P-3485-1 TEE, BARBED BRANCH 3/4 X 3/4 X 1/4 NPT

1 2 AT0P-3477-80170 HOSE, SILICONE, BRAIDED REINFORCED 3/4" IDx17" LG

1 1 AT0P-3477-80060 HOSE, SILICONE, BRAIDED REINFORCED 3/4" IDx6" LG

QTY.

6

3

AT1A-3463-1

1

13

7

9

11

8

12

APPRDATEDESCRIPTIONREVECN

GLS/ALB06-27-08RELEASED TO PRODUCTIONA422

REVISIONS

A

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 33

Rev.

8415 N. Clinton Park

Fort Wayne, IN 46825

AccuTemp Products, Inc.

CAST HEATER

EPLACEMENT KIT R

itle: T

5/8/2008

5/8/2008LRW

ALB

PLACE ITEMS 2 THRU 6 INTO ITEM 7.

NOTES:

1

WRAP ITEM 1 WITH ITEM 8.

2

Name Date

LRW 5/8/2008

N/A

Drawn

Checked

Project Eng

Material:

AT1A-3530

ECN: 0

rawing No.: D

D

Size:

Scale: 1:5 Sheet 1 of 1

N/A

Finish:

CAST HEATER ASSEMBLY

- 1 AT1A-3531-4 CAST HEATER ASSEMBLY

AT1A-3531-3 CAST HEATER ASSEMBLY

-- -1 1

AT1A-3531-2

- - 1 1 AT1A-3531-1 CAST HEATER ASSEMBLY

--

ITEM PART NUMBER DESCRIPTION

Do Not Scale Drawing

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

Unless otherwise specified,

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

√125 Micro Inches

GD&T Per ANSI Y14.5M

Comments:

AT0A-2615-1

QTY

AT1A-3530-2

QTY

AT1A-3530-3

QTY

AT1A-3530-4

QTY

5 5 5 5 5 5 10 AT0S-3535-1 PLANK FOAM

1 1 1 1 1 1 9 AT0S-3533-1 BOX, CARDBOARD

AR AR AR AR AR AR 8 AT0S-2770-1 FOAM OR BUBBLE WRAP

1 1 1 1 1 1 7 AT0H-2782-2 BAG, 9 X 12 RECLOSABLE

25 25 25 25 25 25 6 AT0F-3401-1 NUT, SPECIAL LOCKING 1/4-20UNC-2B

1 1 1 1 1 1 5 AT0H-3532-1 PAINT BRUSH

1 1 1 1 1 1 4 AT1T-3534-1 INSTRUCTIONS, CAST HEATER FIELD REPLACEMENT

1 1 1 1 1 1 3 AT1E-2653-3 OVERTEMP SWITCH

1 1 1 1 1 1 2 AT0H-3412-2 WAKEFIELD 120 THERMAL JOINT COMPOUND

1 - - - - - 1 AT1A-3531-7 CAST HEATER ASSEMBLY

- 1 - - - - 1 AT1A-3531-6 CAST HEATER ASSEMBLY

AT1A-3530-6

-

QTY

AT1A-3530-7

- - 1 - -

- -

- - - - 1 - 1

QTY

1

7

4

5

2

3

6

415V 16.0KW 440V 18.0KW

2

1

10

TERMINAL #6

TERMINAL #5

TERMINAL #4

TERMINAL #3

TERMINAL #2

9

TERMINAL #1

AT1A-3530-1 208V 6.0KW 230V 7.3KW 240V 8.0KW 380V 6.7KW 400V 7.4KW 415V 8.0KW 440V 9.0KW 480V 10.7KW

AT1A-3530-2 240V 6.0KW

AT1A-3530-3 208V 8.0KW 240V 10.7KW 380V 9.0KW 400V 10.0KW 415V 10.7KW 480V 14.0KW

AT1A-3530-6 208V 10.0KW

AT1A-3530-4 380V 13.0KW208V 12.0KW 400V 14.8KW240V 16.0KW

AT1A-3530-7 208V 17.0KW

PART NUMBER RATED VOLTAGE / WATTAGE

EVISIONS R

410 A RELEASED TO PRODUCTION 05-15-08 LRW/ALB

ECN REV DESCRIPTION DATE APPR

-

Form MP4007-0808 AccuTemp Steam'N'Hold Parts Manual

Page 34

Rev.Drawing No.:Size:

Sheet 1 of 1

415 N. Clinton Park

ort Wayne, IN 46825

8

F

AccuTemp Products, Inc.

COMPRESSION FITTING TO FEMALE NPT

2AT0P-3293-1

ASSEMBLY

AT1A-3295

EDR: 130

PRESSURE SWITCH

D

Title:

Date

1/1/2005

TUBING, PRESSURE SWITCH1

Name

1/1/2005

ALB 7/11/2006

Project Eng

Drawn

Checked

N/A

Material:

cale: 1:1 S

N/A

Finish:

NOTES: UNLESS OTHERWISE SPECIFIED

AT1P-3297-11111

PART NUMBER ITEM DESCRIPTION

Unless otherwise specified,

AT1A-3295-1

Dimensions: Inches

Angular 1°

Bends: 90

Tolerances:

√125 Micro Inches

T.I.R .005

3 Place Decimal .005

2 Place Decimal .02

GD&T Per ANSI Y14.5M

Do Not Scale Drawing

Comments:

QTY

AT1A-3295-2

QTY

AT1A-3295-3

QTY

AT1A-3295-4

1 1 - - AT0P-2858-2 5 TEE MALE BRANCH

1 1 - - AT1E-2647-2 4 PRESSURE SWITCH, HIGH

1 1 1 1 AT1E-2647-1 3 PRESSURE SWITCH, LOW

1. ALL PIPE THREADS TO BE SEALED WITH TEFLON THREAD SEALANT TAPE.

AR AR AR AR AT0P-3063-1 6 ¼" TEFLON TAPE

1 1 1 1

QTY

3

5

AT1A-3295-4

3

2

1

AT1A-3295-2

4

1

2

3

2

1

AT1A-3295-1

3

5

AT1A-3295-3

EVISIONS R

4

2

1

- EDR-130 RELEASED TO PRODUCTION 08-22-06 LEC/ALB

ECN REV DESCRIPTION DATE APPR

WARRANTY

35

LIMITED WARRANTY

One Year – Parts and Labor

U.S. & Canada Only

AccuTemp Products, Inc. (AccuTemp) warrants that your AccuTemp equipment will be free of defects in material and workmanship under normal use for a period of twelve (12) months from installation or fifteen (15) months from date of shipment from AccuTemp, whichever date first occurs (the Warranty Period). Registration of AccuTemp equipment is required at the time of installation. Damage to AccuTemp equipment that occurs during shipment must be reported to the carrier, and is not covered under this warranty. The reporting of any damage during shipment is the sole responsibility of the commercial purchaser/user of such AccuTemp equipment.

AccuTemp provides an active service department, which should be contacted and advised of service issues, regardless of the warranty period. During the warranty period, AccuTemp agrees to repair or replace, at its option, F.O.B. factory, any part which proves to be defective due to defects in material or workmanship, provided the equipment has not been altered in any way and has been properly installed, maintained, and operated in accordance with the instructions in the AccuTemp Owners Manual. During the warranty period, AccuTemp also agrees to pay for any factory authorized equipment service agency (within the continental United States and Canada) for reasonable labor required to repair or replace, at our option, F.O.B. factory, any part which proves to be defective due to defects in materials or workmanship, provided the service agency has received advance approval from AccuTemp factory service to perform the repair or replacement. This warranty includes travel time not to exceed two hours and mileage not to exceed 50 miles (100 miles round trip), but does not include post start-up assistance or training, tightening of loose fittings or external electrical connections, minor adjustments, maintenance, or cleaning. AccuTemp will not reimburse the expense of labor required to replace parts after the expiration of the warranty period.

Proper installation is the responsibility of the dealer, owner-user, or installing contractor and is not covered by this warranty. Improper installation can affect your warranty. Installation is the responsibility of the Dealer, Owner/User or the Installation Contractor. See the Installation section of the Owners Manual. While AccuTemp products are built to comply with applicable standards for manufacturers, including Underwriters Laboratories (UL) and National Sanitation Foundation (NSF), it is the responsibility of the owner and the installer to comply with any applicable local codes that may exist.

AccuTemp makes no other warranties or guarantees, whether expressed or implied, including any warranties of performance, merchantability, or fitness for any particular purpose. AccuTemp’s liability on any claim of any kind, including negligence, with respect to the goods and services covered hereunder, shall in no case exceed the price of the goods and services, or parts thereof, which gives rise to the claim. In no event shall AccuTemp be liable for special, incidental, or consequential damages, or damages in the nature of penalties.

This constitutes the entire warranty, which supersedes and excludes all other warranties, whether written, oral, or implied.

Form MP4007-0808

STEAM ’N’ HOLD

 STEAMER OWNERS MANUAL Page 35