Page 1
High performance power supply for the motor and
laser control with very accurate voltage stabilization
made of finest selected components
R
Special digital cable made of pure silver
High performance power supply with
accurate voltage stabilization made
of finest selected components
LCD mechanism top cover milled out of
15 mm thick aluminium and coated with
light absorbing lacquer (NEXTEL );
R
4 notches for safe pick up of the CD
High performance power supply for
the digital signal processing with
very accurate voltage stabilization
made of finest selected components
High-End CD mechanism (CD Pro2 LF) with
die-cast metal frame; CD positioning using
precise separate puck
© ACCUSTIC ARTS
Page 2
2 premium rotary switches („Made in Germany“)
with gold-plated silver contacts for a minimum
of 25,000 switching cycles
Magnetically shielded toroidal core transformer
(75 VA) exclusively for the digital signal
processing connected via shielded cable
R
Massive, 10 mm thick aluminium front panel,
brushed and anodised (silver or black)
Magnetically shielded toroidal core transformer
(75 VA) for the motor control, laser control,
display heating, display control
Controller
board
Special mains filter, exactly tuned
for the DRIVE II
Massive, 10 mm thick aluminium
side panel, brushed and anodised
(silver or black)
Massive aluminium housing with
“subchassis-construction” principle:
CD mechanism mechanically decoupled
by steel springs and rubber bumps
Polarity Indicator: By pushing this
switch the DRIVE II automatically
has the correct phase
Mains Filter: With this switch the
filter can be turned on or off
3 digital outputs:
XLR, RCA and BNC
© ACCUSTIC ARTS
Page 3
Massive aluminium top cover, brushed and
anodised (silver or black); with integrated damping
R
Turning knobs, push buttons, retaining
pins and logo made of massive, high
gloss finished and chromed brass
Sliding lid milled out of 20 mm thick aluminium;
with integrated damping; brushed and anodised
(silver or black)
© ACCUSTIC ARTS
Loading...