Accusplit Eagle AE170XL User Manual

ACCUSPLIT®EAGLE

ACCUS

P

LIT

EAGLE

Di

g
iw

alkerX

L.c

om

ST

EP TIME DIST CA

L

SET

4728

MODE

RESE

T

S3–

S1, S2,

S4

S3+

17

0

XL

170

JW200

ACCUSPLIT, Inc.

3090 Independence Drive, Suite 148

Livermore, CA 94551 USA

AE170XL

PEDOMETER

800-935-1996 • 925-290-1900 • FAX [phone]

www.ACCUSPLIT.com • [e-mail]

Eat Right! Walk More! Live Well!

e ACCUSPLIT Lifestyle

Functions

• Step counter.

• Distance in mi or km.

• Calories, based on high-accuracy proprietary formula.

For complete Function Specifications, go to page 27.

2

2 3

970-088

Nov 07

Operating Instructions

Key Features

• Built around the Japanese-made JW200 PedometerEngine™
Step Sensor, the current gold standard for accuracy.

• Extra Large Digits.

• The ACCUSPLIT exclusive case makes this the slimmest

available pedometer built around the JW200 Step Sensor.

• Chromed, Spring Steel clip resists breakage.

• Case includes two leash slots, for attaching safety leash

on either side. Made from tough polycarbonate plastic.

• Step filter, can be set from 0-5 steps to further increase
accuracy.

HOW TO OPEN YOUR PEDOMETER

See diagrams at right.

The cover must be closed for the
pedometer to work.

USE IT NOW!

Your pedometer is preset with standardized settings
that allow you to use it now! You can customize the
settings later. Skip to pages 16-19 to use it now!

SETTING UP YOUR PEDOMETER

It’s a good idea to set up your pedometer before first using it.
To record your distance and calories accurately, you will need
to set your stride length and body weight. You may also wish
to set the clock to the correct time of day.

See page 9 when you are ready to set up your unit.

4 5

Getting Acquainted

• Press the MODE button to cycle through the display
modes (Steps, Activity Time, …).
See page 19 and Specifications for details.

Mode
indicator

IGI-WALKERXL.COM

D

STEP DIST CAL SET

• The RESET button sets your counts back to zero.
See page 20 for details.

MODES

• STEP: STEP mode shows step count.

• DIST: DISTANCE mode shows distance traveled (mi/km).

• CAL: CALORIE mode shows calories burned.

6 7

XL

S3- S3+S1,S2,S4

RESET Button (yellow)

Steps
Counted

MODE Button

SETTING PROCEDURE

STEP DIST CAL SET

DIGI-WA LKERXL.C OM

170

XL

S3- S3+S1,S2,S4

JW200

lb

STEP TIME DIST SET

DIGI-WAL KERXL.COM

140S

XL

S3- S3+S1,S2,S4

JW200

in

ACCUSPLIT products use a common setting procedure
known as “S1- S2-S3-S4.” Here’s how it works:

Press S1 for 2 seconds: Enter the SET mode
Press S2: Change the field to be set
Press S3: Change the field value
Press S4 for 2 seconds: Exit the SET mode

You can enter and exit Set mode from any of the regular
display screens. Once in Set mode, you can cycle through all
of these settings by pressing S2 repeatedly:

Set Stride Length g Set Weight g Set Stride Length

We recommend that you adjust the settings all at once, using
the procedure below.

Entering set mode

Press and hold the S1 button for 2 seconds.
The display will start to flash, showing that you’ve entered
SET mode.

8

“in” indicator
for inches

Stride
Length
Flashes

Setting Stride Length

10

Finding Your Stride Length: Your stride length is the

length of one of your steps, measured from “toe to toe.” To
measure, walk 10 steps with your normal stride and measure
the TOTAL DISTANCE from the toe of your starting step to
the toe of your 10th step (see diagram below). Divide the
TOTAL DISTANCE by 10, and multiply the decimal portion by
12 to find your stride length in feet and inches. Example: You
walk 23 feet and 6½ inches in 10 steps. Convert to feet only =

23.542 feet (6½ ÷ 12 = 0.542). Divide by ten to get the stride
length in feet = 2.354 feet. Now, convert back to feet and
inches to get your stride length = 2 feet 4.25 inches (0.354 ×
12 = 4.25).

10 steps

12

9

Setting Stride Length

1. Press S2, repeatedly until the mode indicator
bar is underneath DIST and the “in” indicator comes on.
The display will show a flashing number, which is your
Stride Length set point (in inches).

2. Press the S3 + (MODE) button to increase the Stride
Length (in increments of ¼ inch), and press the S3-
(RESET) button to decrease the Stride Length. Hold
the buttons down to change values quickly.

3. Press the S2 button to adjust your weight setting.

11

“lb” to
indicate
pounds

Setting Your Weight

13

Setting your Weight

1. (Continuing from above) - After pressing S2,
you will see the “in” indicator go out, and the “lb”
indicator come on. The display will show a flashing
number, which is your Weight setting (in pounds).
Note: Unit will show ”kg” for weight setting when in
metric mode.

2. As before, press the S3 + (MODE) button to increase
the Weight (in increments of ½ pound), and press the S3

- (RESET) button to decrease the Weight setting. Hold the
buttons down to change values quickly.

3. Press the S2 button to adjust the Clock.

Note: If you need to go back and change some of the values,
simply press S2 to cycle through all of the set points until you
see the one you want to change.

Exiting Set Mode

Press and hold the S4 button for 2 seconds. The unit will exit
setting mode – no values will be flashing anymore.

Note: The unit will save any changes and exit set mode after
30 seconds unattended.

1514