AccuScreens FIXED SCREEN User Manual

ASSEMBLY/MOUNTING INSTRUCTIONS

FOR FIXED SCREEN

WALL/PORTABLE PROJECTION SCREENS

QUALITY FEATURES FOR
BETTER PICTURE, EASIER
ASSEMBLY, LONGER LIFE

• Quick and easy installation
without snaps.

• No tools required for installation.

• Viewing surface is washable.

• Frame tears down quickly for
storage.

• Frame is labeled for quick and
easy assembly.

• Can be mounted permantly to the
wall, or used as a portable screen
with optional leg kit.

• Ideal projection screen for
home, office or for making
presentations.

Fixed Screen

Wall Mount

Configuration

FABRIC CLEANING AND CARE

The screen fabric can be dry
cleaned or machine washed in cold
water with mild detergent. Tumble
dry on low heat. CAUTION: Keep
away from high temperature

Fabric Construction:
100% Polyester

Added Treatments: Environmental
Protection, Anti-Microbial, Flame
Retardant (Meets NFPA 701
standards)

Fixed Screen

Portable Configuration

with Optional Leg Kit

1

Velcro
Strap

Fa

bric

Vinyl
Strip

1

2

3

4

5

6

7

8

B

ASSEMBLY

• Find a clean surface to work on.

• Place frame pieces face down on the clean work surface
(so the extrusions are facing up).

• The frame pieces are labeled 1-8. Starting with No. 1,
follow the numbers clockwise and connect frame pieces
together. Hand tighten the screws.

• Remove viewing surface from protective pouch and
spread out over the frame so that the vinyl strip is facing
down.

• Attach the corners of the viewing surface to the corners
of the frame using the velcro straps.

• Finish attaching viewing surface to frame by inserting
the vinyl strips along all four sides into the fabric retainer
extrusions on the frame.

LABELING OF SCREEN FRAME PIECES

Velcro
Strap

PORTABLE MOUNTING
USING OPTIONAL LEG KIT

• Extend the center support to the correct height and
place it in the center of the screen frame. This will
provide additional tension to the center of the frame
and prevent sagging.

• Mount the legs to the back of the screen frame using
pre-mounted attachment brackets.

• Place plastic octagonal feet on the floor, and insert
aluminum legs into plastic octagonal feet.

2

SUGGESTED METHODS OF INSTALLATION

H

W

Make sure brackets on

bottom are installed

upside down, as sho

wn.

WALL MOUNTING

• Attach four mounting brackets to the wall—two each at the top and bot­tom. Make sure the two top brackets are mounted level. Eight # 8 x 1" long
Phillips Pan Head screws & eight plastic mollies as used in dry wall are
provided. However, certain installations may require fastener hardware that
is not supplied.

• Use chart below to determine bracket spacing, and how far down to locate
the two bottom brackets.

• Mount the screen to the wall brackets (see detail C) by hanging the screen
from the top brackets, then pulling down slightly on the bottom of the screen
frame, allowing the frame to snap up onto the bottom brackets.

WALL BRACKET SPACING

Screen Size Height Width

82" HDTV 411/8" 32"
92" HDTV 46" 32"
106" HDTV 53" 42"
84" NTSC 513/8" 32"
100" NTSC 61" 32"

END USER PRODUCT LIMITED

WARRANTY AND RETURN POLICY

LIMITED WARRANTY

AccuScreens warrants (this "Limited Warranty") to the original end user customer (the "End User")
that this product is free from defects in material and workmanship (except as provided below) for
twelve (12) months from the date of manufacture or one (1) year from the date of purchase, whichever
period ends first (the "Warranty Period"). This Limited Warranty extends only to the End User, and
is not transferable. This Limited Warranty is applicable to products that are repaired or replaced for
the balance of the Warranty Period or for ninety (90) days from the date the product is repaired or
replaced, whichever is longer.

If a product breaches this Limited Warranty, the End User may return it to AccuScreens in accordance
with the terms of the Return Policy, below, within a reasonable time after the End User discovers the
defect. Subject to the conditions and limitations set forth below (the "Excluded Items"), AccuScreens
will, at its discretion, either repair or replace any part of the product that proves defective by reason
of improper workmanship or materials. If the End User returns a product to AccuScreens and
AccuScreens determines that this Limited Warranty does not apply, AccuScreens will not return

3

the product to the End User unless the End User requests it to do so and pays all expenses

of shipment. If End User does not request and pay for AccuScreens to return the product, it will
become AccuScreens' property. Any product covered by this Limited Warranty (as determined by
AccuScreens) will, after repair or replacement, be shipped back to the End User at AccuScreens'
expense.

AccuScreens’ total liability under this or any other warranty, express or implied, is limited to repair,
replacement or refund. Repair, replacement or refund are the sole and exclusive remedies or breach of
warranty or any other legal theory. In no event shall AccuScreens be liable for any incidental, indirect or
consequential damages, whether resulting from the purchase, use, misuse, inability to use or inability to
install the product or from defects in the product.

Some states do not allow the exclusion or limitation of incidental and consequential damages, so the above
limitation or exclusion may not apply.

This limited warranty is the exclusive warranty given by AccuScreens for the product and is in lieu of
all other warranties. AccuScreens disclaims all other warranties, whether express, implied or statutory,
including any warranty of merchant ability, any warranty of fitness for a particular purpose and any implied
warranties arising from a course of dealing or usage of trade. This warranty supersedes all other warranties,
including any warranties based on oral representations.

This warranty gives the end user specific legal rights, and the end user may have other rights which vary
from state to state.

EXCLUDED ITEMS

This limited warranty does not cover defects caused by negligence; improper maintenance; improper
storage; misuse; installation not in accordance with AccuScreens' printed installation instructions;
abuse; impact or other force, whether prior or subsequent to installation; normal wear and tear; fire,
lightning, tornadoes, or other acts of God; contact with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food; excessive electrical supply; abnormal mechanical
or environmental conditions; application other than intended use; unauthorized disassembly, repair or
modification; service by unauthorized provider; installation of unapproved third party products; buyer's
remorse. This Warranty also does not apply to any product on which the original identification information
has been altered, obliterated or removed, or has been sold as second-hand.

AccuScreens does not warrant against freight damage, concealed or otherwise. The End User must contact
the delivering carrier to report freight damage within 48 hours of receipt of product. Failure to report freight
damages within the carrier's guidelines may result in the End User bearing all costs. Failure to sign the
delivery receipt acknowledges approval of the product as is and nulls the End User's claim.

RETURN POLICY

If the End User returns a product (a "Returned Item") for any reason, the End User must comply with the
following requirements:

Contact AccuScreens to obtain an RMA Number by telephoning AccuScreens' customer service department
at 866-902-7094. In order to receive an RMA you must provide photocopies of the original invoice
and carton label with the AccuScreens Part Number and UPC Bar Code. A Returned Item returned to
AccuScreens without a valid RMA Number will be rejected by AccuScreens;

Within 30 days of obtaining the RMA Number, the End User must send the Returned Item freight pre-paid
and insured to AccuScreens.

A Returned Item must be properly packaged to prevent damage in transit and must include the original
invoice and carton label with the AccuScreens Part Number and the UPC Bar Code. Product must
be returned in the original packaging carton and materials. A Returned Item improperly shipped to
AccuScreens voids all warranties;

The RMA Number must be visible on the outside of the package. Any return without a valid RMA number
is subject to refusal by AccuScreens; and the End User agrees that AccuScreens is not responsible for any

loss or damage to a Returned Item sustained in transit.

4