Accurate Thermal Systems ThermCal400 Specifications

D

RY BLOCK TEMPERATURE CALIBRATORS

Model

ThermCal

400

PH: 609

-

326

-

3190

From

Accurate Thermal Systems

APPLIC A TI O N S

Temperature sensor
calibration including:

-RTD’s/PRT’s

-Thermocouples

-LIG thermometers

-Thermal switches

-Dial thermometers

-Hand held digital indicators

-Data loggers & recorders

.. and many others

BENEFIT S

Fast heat up &
stabilization

Operates ambient +5°C to
400°C/752°F

Lightweight

RS485 interface for PC
connection

CE marked

Designed & manufactured
in the USA

Temperature Calibrator

Laboratory performance at an
economical price

Lightweight and portable for use in
the field

Removable probe inserts for
flexibility & many probe sizes

Adjustable ramp rate for testing
thermal switches

CE marked for safety

With over 25 years of experience designing, manufacturing
and supporting Dry Block Temperature Calibrators we have
developed two units that offer outstanding performance,
features and value that are unmatched. These units have a
small footprint, fast heat up and cool down and are light
weight for both field and laboratory use. Unlike many
competing lower cost models that only offer a fixed block our
units accept inserts for probe size flexibility in addition to
fixed holes.

Unique Solutions for Thermal Applications

ThermCal400

Features and

Specifications

4106 Sylon Blvd

ThermCal

400

WHAT ’ S I N C L U D E D

-ThermCal400 calibrator

-multiwell insert to accept
1/8”, 3/16”, 1/4”, 5/16”, &
3/8” diameter probes

-Carrying strap

-Insert removal tool

-Mains cable

-Traceable calibration
certificate

WHAT D O I N E E D T O
RUN TH E S Y S T E M

-120 or 240 VAC mains
supply 50/60hz

-8 amp supply (

-4 amp supply

SERV I CES
AVAI L ABLE

-Technical support

-Application support

-Installation and setup

-Maintenance

Hainesport, NJ 08036 USA

Ph: 609-326-3190

Fax: [phone]

Email: [e-mail]

www.accuthermal.com

V3 116

120 volt)

(240 volt)

Website:

The ThermCal400 controller offers a large,
bright and easy to read display. This controller
has advanced 5 zone PID control for optimum
performance and adjustable ramp rates for
proper testing of thermal switches. The unit is
switchable between °F and °C along with the
ability to easily adjust unit calibration using
your own temperature standards.

Independent limit control is incorporated into
the unit to prevent operation and/or fault
conditions above 425°C. A cooling fan keeps
the internal components and controller cool at
all operating temperatures.

ThermCal400 includes everything you need to
operate it straight out of the box. We offer
several optional inserts and carrying case
listed below.

Specifications and Ordering

Temperature range (22°C ambient)

Accuracy ±0.4°C or ±0.7°F

Stability Better than ±0.05°C/±0.09°F

Radial uniformity (same sized wells) 0.025 at 400°C

Heat up time – ambient to max 12 minutes

Cool down time – max to 100°C 20 minutes

Probe well depth & insert diameter 4.5” depth by 1.5” diameter

Power consumption 900 watts

Overall dimensions 8” H x 8” W x 8” L

Weight with insert 11 pounds

Warranty 2 years

Ordering information

Optional Accessories

Insert 5 x 1/4” wells – ATS3043 1 x 9/16” & 1 x 1/4” wells – ATS3048

Insert 2 x 1/4” & 2 x 3/8” wells – ATS3044 Insert 1 x 5/8” & 1 x 1/4” wells – ATS3049

Insert 2 x 1/4” & 2 x 1/2 “ wells – ATS3045 Insert 1 x 11/16” & 1 x 1/4” wells – ATS3050

Insert 1 x 1/4” wells – ATS3046 1 x 3/4” & 1 x 1/4” wells – ATS3051

Insert blank – ATS3047 Softe sided carrying case – ATS3052

27°C (80°F) to 400°C (752°F)

120 volt model: ATS3010
240 volt model: ATS3020