Accurate Thermal Systems
Fluidized Temperature Baths
Model FTB
LL
27
& FTBLL
47
PH: 609
-
326
-
3190
APPL I C A TIO N S
Thermal cleaning of
Extrusion tooling including:
-breaker plates
-dies
-nozzles
-tips
-screens
-metal filters
-flanges
-hardware
-and many more…….
General heat treatment of
devices & materials
Heating of reactors
BEN E F I T S
Large working volume –
up to 15.8”
depth in parts basket
depending on model
Up to 18kW heat capacity
for fast heat up
Safer to the operator and
tooling versus other
methods
Designed and
manufactured in USA
diameter
by 47”
Fluidized Temperature Baths
Fully automatic Fluidizing air control
Independent over-temperature
protection
Advanced PID temperature controller
for optimum results
Built rugged for of reliable operation
Cleans most tooling in under 60
minutes
Removes all types of polymer
including paint, adhesives, resins and
plastic
With over 25 years of experience with Fluidized Bath
technology we have developed a range of products that offer
outstanding performance, safety, features and value that are
unmatched. Unlike competing Fluidized baths our systems
offer fully automatic Fluidizing air control and an advanced
PID temperature controller for thermal performance.
Fluidized Temperature Baths have been the thermal cleaning
method of choice for over 40 years by many leading Fortune
500 companies. The cleaning process is thermal which
breaks down all polymers and is not abrasive. You too can
benefit from Fluidized Bath safety, fast cleaning and reduced
labor in your extrusion operation and tool room.
Unique Solutions for Thermal Applications
Features and
Specifications
4106 Sylon Blvd
MODEL
FTBLL
27
& FTBLL
47
WH A T ’ S I NC L U D ED
-Fluidized Bath
-full charge of bath media
-Instruction manual
WH A T D O I N E E D T O
RU N T H E S Y S T E M
-480 Volt, 50/60 Hz, 3
phase power, 15.5 amps
per leg for FTBLL27 &
21.5 amps per leg for
FTBLL47
-
Clean dry air supply that
can deliver a fixed 70 PSI at
a max flow of 15 CFM
-Exhaust hood for fumes
SERVI C E S AVAILABLE
-Technical support
-Application support
-Installation and setup
-Maintenance
The model FTBLL27 and FTBLL47 use a PID
temperature controller that has four control
zones for improved thermal results. Independent
over temperature protection will disable heat if
the temperature exceeds 610°C or if the air
supply pressure drops below 60 PSI. Fluidizing
air is automatically controlled by the system.
The remote control box includes an RS485
computer interface for connection to a PC with
downloadable software from our website.
The control box is mounted on an articulating
arm so it can be moved out of the way for
improved access to the bath. The horizontal
and vertical position of the arm can be
changed as well as angle for easy viewing. It
is connected the main control box via a 15 way
cable. An air flow meter mounted on the main
control box displays Fluidizing air rates.
Contact us today to request a quotation or for
application assistance.
PH: 609-326-3190
Specifications & Ordering info
FTBLL27 FTBLL47
Temperature range 50 to 605°C
Working volume in parts basket 15.8” x 27” 15.8” x 47”
Stability at 900°F, better than - ±5.0 ±10.0
Heat up time to 900°F 210 minutes 190 minutes
Cool down time – max to 400°F 240 minutes 300 minutes
Power consumption – 480V, 3 phase 12.9 kW 18 kW
Air pressure & flow required, max 70 PSI, 15 CFM
Overall footprint, H x W x D - inches 53 x 36x 31 72 x 36 x 31
Unit weight without aluminum oxide 450 lbs 700 lbs
Aluminum oxide required / supplied 450 / 500 lbs 670 / 700 lbs
Cleaning capacity 130 lbs 200 lbs
Order code ATS1016 ATS1015
Warranty 1 year
Standard Accessories
Retort lid ATS1031
Standard parts basket ATS1053 ATS1030
Three tiered basket ATS1065 ATS1059
Aluminum oxide – 100 pound pail ATS1027
Aluminum oxide – 400 pound drum ATS1028
Hainesport, NJ 08036 USA
Ph: 609-326-3190
Fax: 609-479-5124
Email: sales@accuthermal.com
Website: www.accuthermal.com
Loading...