Accurate Thermal Systems FTBLL12 Specifications
Accurate Thermal Systems
Fluidized Temperature Baths
APPL I C A TIO N S
Model FTB
LL12
& FTBLL26
PH: 609
-
326
-
3190
Thermal cleaning of
Extrusion tooling including:
-breaker plates
-dies
-nozzles
-tips
-screens
-metal filters
-feed pipe
-hardware
-or any other part with
tough to remove material
General heat treatment of
devices & materials
Heating of reactors
BEN E F I T S
Large working volume –
up to 8.3”
depth in parts basket
depending on model
Up to 6500 watts of heat
capacity for fast heat up
Safer to the operator and
tooling versus other
methods
Designed and
manufactured in USA
CE marked
diameter
by 26”
Fluidized Temperature Baths
Fully automatic Fluidizing air control
Independent over-temperature
protection
Advanced PID temperature controller
for optimum results
Built rugged for years of reliable
operation
Cleans most tooling in under 60
minutes
Removes all types of polymer, paint,
adhesives and resins
With over 25 years of experience with Fluidized Bath
technology we have developed a range of products that offer
outstanding performance, safety, features and value that are
unmatched. Unlike competing Fluidized baths our systems
offer fully automatic Fluidizing air control and an advanced
PID temperature controller for thermal performance.
Fluidized Temperature Baths have been the thermal cleaning
source of choice for over 40 years by many leading Fortune
500 companies. The cleaning process is thermal which
breaks down all polymers and is not abrasive. You too can
benefit from Fluidized Bath safety, fast cleaning and reduced
labor in your extrusion operation and tool room.
Unique Solutions for Thermal Applications
Features and
Specifications
4106 Sylon Blvd
MODEL
FTBLL12
& FTBLL26
WH A T ’ S I NC L U D ED
-Fluidized Bath
-full charge of bath media
-Instruction manual
WH A T D O I N E E D T O
RU N T H E S Y S T E M
-240 VAC mains, 50/60 Hz,
20 amps for FTBLL12
30 amps for FTBLL26 &
FTBLL12W
-
Clean dry air supply that
can deliver a fixed 40 PSI at
a max flow of 4.0 CFM
-Exhaust hood for fumes
SERVI C E S AVAILABLE
-Technical support
-Application support
-Installation and setup
-Maintenance
V4 116
Hainesport, NJ 08036 USA
Ph: 609-326-3190
Fax: 609-479-5124
Email: sales@accuthermal.com
Website: www.accuthermal.com
The model FTBLL12 and FTBLL26 use a PID
temperature controller that has four control
zones for improved thermal results. Independent
over temperature protection will disable heat if
the temperature exceeds 615°C or in the event
of a system failure. The systems are double
fused for improved safety and include an RS485
computer interface for connection to a PC with
downloadable software from our website.
Fluidizing air is automatically controlled by a
four step process that adjusts the air flow as
the system ramps up and cools down making
our systems turn-key and easy to use. The
flow rates can be visually verified by the front
panel air flow meter.
Contact us today to request a quotation or for
application assistance.
Specifications & Ordering info
FTBLL12 FTBLL26 FTBLL12W
Temperature range 50 to 605°C
Working volume in parts basket - dia. X depth 8 3/8” x 12” 8 3/8” x 26” 12 3/8” x 13”
Stability at 500°C, better than - ±1.0 ±1.5 ±1.5
Heat up time to 600°C, 240V supply 150 minutes 180 minutes 200 minutes
Cool down time – max to 200°C 150 minutes 210 minutes 180 minutes
Power consumption – 240 VAC 4500 watts 6200 watts 6500 watts
Air pressure & flow required, max 40 PSI, 4.0 CFM
Overall footprint, H x W x D - inches 27 x 24 x 21 41 x 24 x 21 37 x 30 x 26
Operating weight with aluminum oxide (pounds) 210 360 350
Cleaning Capacity (pounds) 25 50 50
Order code ATS1012 ATS1013 ATS1017
Warranty 1 year
Standard Accessories
Retort lid ATS1020 ATS1087
Extraction collar/ exhaust port ATS1021 Included
Standard parts basket ATS1022 ATS1024 ATS1088
Basket for use with extraction collar ATS1023 ATS1025 N/A
Aluminum oxide – 100 pound pail ATS1027
Parts basket cooling stand & sieve ATS1041
Loading...