AccuPower IQ-338 operation manual

User Manual

User Manual IQ338

Please read the manual carefully before using this charger.
We thank you that you have decided to purchase our intelligent charger.

English

Please follow the safety and care instructions in this manual, to be able to use this device
efficiently and safely.

Included in delivery:

• Charger IQ338

• Power supply

• User Manual

9 120004 642783

1/7 Update version-V2

User Manual

Important notes:

 Use the IQ338 charger only with Li-Ion cells with 3.6V-3.7V and NiCd, NiMH cells

with 1.2V rechargeable batteries.

 With the IQ338 you can automatically charge the following types of cells:

Li-Ion: 26650, 26700, 22650, 18700, 18650, 17670, 18490, 18500, 17500, 17355,
16340, (RCR123), 14500, 10440
NiMH/NiCd: AA, AAA, A, Sub-C, C Baby

 Do not use the charger with other types of batteries (for example: Alkaline or other

Systems).

 Use the charger only in dry and closed rooms with normal conditions.
 If the charger is not in use, we recommend to disconnect the power cable from the

English

socket.

 During the charging process, you should not leave the charger unattended.
 Keep the batteries out of the reach of children.
 When new batteries are in use for the first time, it might be required that the

batteries need to be charged and discharged several times before they reach their
optimum capacity.

 The charger must be used on a non flammable base.
 Always use the right charging current for each battery. You can look for the right

current in the manufacturer specification.

 Heat get produced if batteries get charged. It is very important to ensure that the

charger is placed in an incombustible area (pay attention to carpets, paper,
flammable liquids, furniture and so on).

2/7 Update version-V2

User Manual

Inputs: DC 12V / 3A
Outputs: Four independent charging slots

One 5W USB output

English

Buttons:

 Battery slot select buttons (1, 2, 3, 4)
 Mode selection button (MODE)
 Charging current selection key

(CURRENT)

Display:

The following values are apparent on the display during a charging process:

 Program (Charge, Fast Test, Nor Test)
 Battery Voltage (V)
 Capacity (mAh)
 Elapsed time (hh:mm)
 Internal resistance (mR)
 Charging current (mA)
 „End“ (Appears if actual charging process finished)
 Channel number

Display Description

3/7 Update version-V2