AccuMac AM1610 Specifications

AM1610 PRECISION INDUSTRIAL PRT

FEATURES

HIGHLIGHTS

OVERVIEW

 Sensor Length: 30 mm
 Accuracy: ±0.05°C
 Durable and shock resistance
 Customized dimensions

available

With 30 mm long sensor, AM1610 series
precision industrial PRT provides users an
excellence temperature probe with extremely
low stem conduction (heat loss along sheath) in
precision temperature measurement. It is a
great tool for measuring and testing the vertical
temperature uniformity of heat sources.

AM1610 uses a special aged and tested 30-mm
long sensing element to achieve the best
performance in stability and repeatability. A
unique assembly procedure provides the best
balance among the hysteresis effect,
mechanical shock and thermal shock
performance.

 Temperature range: -60 °C to 160 °C
 Sensor Length: 30 mm
 Accuracy: ±0.05 °C
 Long term drift: ±0.04 °C
 Short term stability: 0.01 °C
 Durable and shock resistance
 Temperature Coefficient 0.00385
 SST sheath
 Quick response time
 Customized dimensions available

Address: 90 N William Dillard Drive C-107, Gilbert, AZ 85233 For Technical Help: [e-mail]
Phone: [phone] For Sales: [e-mail]

© 2017 Accumac Corporation, All Rights Reserved www.accumac.com

AM1610 PRECISION INDUSTRIAL PRT

tm

SPECIFICATIONS

Temperature Range -60 °C to 160 °C
Resistance at 0 °C Nominal 100 Ω
Temperature Coefficient 0.00385 Ω/ Ω/°C
Accuracy ±0.05 °C over the full range
Drift ±0.04 °C at 0 °C after 100 hours at 160 °C
Short Term Stability ±0.01 °C
Thermal Shock ±0.01 °C after 10 times thermal cycles from minimum to

maximum temperatures

Hysteresis <=0.01 °C
Self-heating 50 mW/°C
Response Time 5 seconds for 63% response to step change in water moving

at 3 feet per second

Measurement Current 0.5 mA or 1 mA
Sensor Length 30 mm
Sensor Location 5 mm from tip
Insulation Resistance >1000 MΩ at room temperature
Sheath Material 316 Stainless Steel
Dimension 1610-12: 0.25 inch X 12 inch (6.35 mm X 305 mm)

1610-9: 0.187 inch X 9 inch (4.75 mm X 229 mm)

External Leads Teflon
Handle Dimension 1610-12: 15 mm (OD) X 65 mm (L)

1610-9: 10 mm (OD) X 50 mm (L)

Handle Temperature Range* -50 °C to 160 °C
Optional Calibration NIST traceable calibration and data available per request:

1610-12: Ordering # 5017

*Handle temperature outside this range will cause damage to the probe.

– insulated copper wire, 4 leads, 2.5 meters

OPTIONAL ACCESSORIES

Model Description

9001 Wooden Carrying Case

Address: 90 N William Dillard Drive C-107, Gilbert, AZ 85233 For Technical Help: [e-mail]
Phone: [phone] For Sales: [e-mail]

© 2017 Accumac Corporation, All Rights Reserved www.accumac.com