AccuMac AM1210 Specifications

AM1210 Reference Standard Type S Thermocouple

HIGHLIGHTS

OVERVIEW

 Affordable reference standard
 Type S
 Short term stability: ±0.2 °C at

 Temperature range: 0 °C to 1300 °C

AM1210 Reference Standard Type S Thermocouple is made from reference grade platinum
and platinum-rhodium alloy. It covers a temperature range of 0 °C to 1300 °C with short
term stability of 0.2 °C all the way to Freezing Point of Copper (1084.62 °C). It is commonly
used as reference standard to calibrate industrial thermocouples. All thermocouple wires
and parts are specially cleaned and annealed before assembly. Every AM1210 thermocouple
is fully annealed and tested again to meet the Tolerance criteria as specified in the table
below.

SPECIFICATIONS

Temperature Range 0 °C to 1300 °C
Type Type S: Platinum/10 % Rhodium vs. platinum
Long Term Drift ±0.6 °C at 1084.62 °C after 1 year typical usage
Tolerance (mV) E(tCu)=10.575±0.015

Short Term Stability ±0.2 °C at 1084.62 °C
Diameter of thermocouple wire 0.5 mm
Sheath Material Quartz or Alumina
Sheath Dimensions OD: 6 mm; Length: 500 mm
External Lead Wire S type thermocouple wire, 500 mm
Protective Carrying Case Included

1084.62 °C

E(tAl)=5.860+0.37(E(tCu)-10.575)±0.005
E(tZn)=3.447+0.18(E(tCu)-10.575) ±0.005

Address: 90 N William Dillard Drive C-107, Gilbert, AZ 85233 For Technical Help: [e-mail]
Phone: [phone] For Sales: [e-mail]

© 2017 Accumac Corporation, All Rights Reserved www.accumac.com