AccuCold PF1KIT User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE

essential 120 volt AC powered

connected appliances for

, accidental

and circuit

sounds for up to 90 minutes,

to reconnect

PF1

Summit Appliance Division, Felix Storch, Inc.

770 Garrison Ave ║Bronx, NY 10474║Phone [phone] ║Fax [phone]

║www.summitappliance.com ║www.medicalrefrigerators.com

INSTRUCTIONS

Power Failure Alarm Cord, Model PF1

This ACCUCOLD power-failure line
cord has a built-in power failure
sensor with an 80dB loud audible
alarm. It is intended for monitoring

cord­power failure events
cord disconnection
breaker failure. The loud signal

Key Components of the Power Failure Alarm Cord

 15 Amp hospital grade grounded three-wire plug
 Alarm housing with rechargeable battery
 AC Power ON LED indicator
 Grounded three-wire 15 Amp connector
 Built-in switch that will silence the alarm when operated in the “alarm off” position

advising the user
power to the device.

INSTALLATION

i. Attach the female connector to the plug of the appliance to be monitored.

ii. Plug the cord into any live 120 volt AC outlet.

Note: If the appliance plug is disconnected from the cord, the alarm will not sound. It will sound

only if power fails to reach the cord.

PF1 Instructions R2