Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
Write Model and Serial Numbers here:
Model # ________________________
Serial # ________________________
Solid Door Refrigerators
ARS23ML ARS49ML
MLR23S MLR49S
SCRR232 SCRR492
Glass Door Refrigerators
ARG23ML ARG49ML
MLR23G MLR49G
SCR23SSG SCR49SSG
Solid Door Freezers
AFS23ML AFS49ML
MLF23S MLF49S
SCFF237 SCFF497
Reach-in Refrigerators and Freezers
Models:
Installation & Instruction Manual
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
1
TABLE OF CONTENTS
Important Safeguards .............................................................. 3 – 5
Installation ...................................................................................... 6
Maintenance & Cleaning ......................................................... 6 – 7
Alarm Function for Cleaning Condenser ................................. 7
Operation ................................................................................ 7 – 11
Basic Operation ................................................................. 7 – 8
Electronic Controller ........................................................ 8 – 11
Troubleshooting ........................................................................... 12
Specifications ....................................................................... 13 – 15
Temperature Set Points and Ranges ..................................... 15
Limited Warranty .......................................................................... 16
2
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and
installed as described in this manual, so read the manual carefully. To
reduce the risk of fire, electrical shock or injury when using the
appliance, follow basic precautions, including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an
adapter, and do not use an extension cord.
Do not connect grounding wire to a gas or water pipe.
Replace all panels before operating.
It is recommended that a separate circuit serving only your appliance be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard
or explosion. And do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance. The fumes can create a fire hazard or
explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line
of the unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so
can result in electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified
technician.
This appliance is CFC- and HFC-free and contains a small quantity of liquid propane
(R290a) which is environmentally friendly, but flammable. It does not damage the ozone
layer, nor does it increase the greenhouse effect. Care must be taken during
transportation and setting up of the appliance that no parts of the cooling system are
damaged. Leaking coolant can ignite and may damage the eyes.
In the event of any damage:
- Avoid open flames and anything that creates a spark,
- Disconnect from the electrical power line,
- Air the room in which the appliance is located for several minutes and
- Contact the Service Department for advice.
The more coolant there is in an appliance, the larger the room it should be installed in. In
the event of a leakage, if the appliance is in a small room, there is the danger of
combustible gases building up. The amount of coolant in the appliance is stated on the
data plate on the appliance. It is hazardous for anyone other than an Authorized Service
Person to carry out servicing or repairs to this appliance.
Take serious care when handling, moving, and using the appliance to avoid either
damaging the refrigerant tubing or increasing the risk of a leak.
Replacing component parts and servicing shall be done by factory authorized service
personnel so as to minimize the risk of possible ignition due to incorrect parts or improper
service.
3
DANGER - Risk of fire or explosion. Flammable refrigerant used.
• Do not use mechanical devices to defrost refrigerator. Do not
puncture refrigerant tubing.
• To be repaired only by trained service personnel. Do not puncture
refrigerant tubing.
CAUTION - Risk of fire or explosion
• Flammable refrigerant used. Consult repair manual/owner’s
guide before attempting to service this product. All safety
precautions must be followed.
• Dispose of properly in accordance with federal or local
regulations. Flammable refrigerant used.
• Risk of fire or explosion due to puncture of refrigerant tubing.
Follow handling instructions carefully. Flammable refrigerant
used.
CAUTION- Avoid obstructing any ventilation openings in the appliance
or in the enclosure when building-in.
CALIFORNIA CARB/SNAP DISCLOSURE For products manufactured after January, 1, 2019:
Retail food refrigeration equipment manufactured after January 1, 2019, designed to store
and display chilled goods for commercial sale, and that use HFC-134a/R134a refrigerant are
not for sale in California.
*This product uses eco-friendly hydrocarbon refrigerant and fully complies with California
CARB regulations. However, we are required by California Law to provide the previous
disclosure statement in every product sold in California.
This product does not use any refrigerants on the “List of Prohibited Substances.”
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install the appliance. Failure to do so can result in
back or other injury.
To prevent overheating and fire hazard, remove all packaging before use, including the
tray at the bottom of the appliance.
When installing, leave at least 8" at the back of the unit.
To ensure proper ventilation for your appliance, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and
below 90°F (32°C). This unit must be installed in an area protected from the elements,
such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical, water and drain connections in
accordance with state and local codes. A standard electrical supply (115 V AC only, 60
Hz), properly grounded in accordance with the National Electrical Code and local codes
and ordinances, is required.
Do not kink or pinch the power supply cord of the appliance.
The size of the fuse (or circuit breaker) should be 15 amperes.
4
It is important that the appliance be leveled in order to work properly. You may need to
make several adjustments to level it.
All installations must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched, kinked or damaged during installation.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the appliance.
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners
may damage or discolor the interior.
Use this appliance only for its intended purpose as described in this User's Manual.
Keep fingers out of the “pinch point” areas. Clearances between the doors and between
the doors and cabinet are necessarily small. Be careful closing doors when children are
in the area.
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous, even if they will “just sit in the garage a few days”.
Before discarding your old refrigerator:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
- SAVE THESE INSTRUCTIONS -
5