AccuCold ACF48WSSHVADA User Manual

FELIX STORCH,INC.

Write Model and Serial Numbers here:

ACF48W series / série

SCUF48W series / série

ACF49B series / série

UPRIGHT FREEZER

CONGELATEUR VERTICAL

SCUF49B series / série

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

AVANT L'UTILISATION, S'IL VO US PLAÎT LIRE ET SUIVRE LES RÈGLES DE SÉCURITÉ

Inscrivez le numéro de modèle et de série ici:

Model/Modèle :

Serial No./N° de série :

INSTRUCTION MANUAL

MODE D'EMPLOI

ET INSTRUCTIONS D'UTILISATION.

Summit Appliance Division 7701 Garrison Avenue Bronx, New York 10474 www.summitappliance.com

TABLE OF CONTENTS

Appliance Safety ................................................................................................ 2

Important Safeguards .................................................................................. 2 – 3

Location of Parts ................................................................................................ 4

Technical Information ........................................................................................ 4

Installation .................................................................................................... 5 – 7

Before Using the Freezer .......................................................................... 5

Installing the Freezer ................................................................................. 5

Electrical Connection .......................................................................... 5 – 6

Reversing the Door Swing ......................................................................... 6

Reversing the Door Handle ....................................................................... 7

Operating the Freezer .................................................................................. 7 – 8

Turning the Freezer On and Off ................................................................ 7

Setting the Temperature Control ......................................................... 7 – 8

Care and Maintenance ................................................................................. 8 – 9

Cleaning Your Applian ce ........................................................................... 8

Power Failure ............................................................................................ 8

Vacation Time ........................................................................................... 9

Moving Your Appliance ............................................................................. 9

Energy Saving Tips .................................................................................... 9

Troubleshooting ............................................................................................... 10

Limited Warranty .............................................................................................. 11

French Version of This Manual ................................................................ 12 - 23

APPLIANCE SAFETY

Your safety and the safety of others ar e very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words DANGER or WARNING.

DANGER means that failure to heed this safety statement may result in severe personal injury or death.

WARNING means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.

All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following:

• Plug into a grounded 3-prong outlet, do not remove grounding pr o ng, do not use an adapter, and do not use an extension cord.

• Replace all panels before oper ati ng.

• It is recommended that a separate circuit serving only your appliance be provided. Use

receptacles that cannot be turned off by a switch or pull chain.

• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

• Do not connect or disconnect the electric plug when your hands are wet.

• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

• Use two or more people to move and install the appliance. Failure to do so can result in back or other injury.

• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the elements, such as wind, rain, water spray or drips.

• The appliance should not be located next to ovens, grills or other sources of high heat.

• The appliance must be installed with all electrical, water and drain connections in accordance

with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the Nation al E lectr ica l Code and loc al codes and ordi nances, is required.

• Do not kink or pinch the power supply cord of the appliance.

• The size of the fuse (or circuit breaker) should be 15 amperes.

• It is important that the appliance be level in order to work properly. You may need to make

several adjustments to level it.

• All installations must be in accordance with local plumbing code requirements.

• Make certain that the pipes are not pinched, kinked or damaged during installation.

• Check for leaks after connection.

• To avoid deformation, never place hot or heavy items on top of the freezer.

• Never allow children to operate, play with or crawl inside the appliance.

• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may

damage or discolor the interior.

• Use this appliance only for its intended purpose as described in this Instruction Manua l .

• Keep fingers out of the “pinch point” areas. Clearances bet ween the door and cabinet are

necessarily small. Be careful closing door when children are in the area.

Risk of child entrapment!

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous, even if they will “just sit for a few days”.

Before discarding your old refrigerator:

• Take off the doors.

• Leave the shelves in place so that children may not easily climb inside.

- SAVE THESE INSTRUCTIONS -

LOCATION OF PARTS

Ventilating fan

Shelves

Air vent

(kick plate)

Digital control panel

Door

TECHNICAL INFORMATION

ACCUCOLD Model Numbers: ACF48W series (white) ACF49B series (black) SUMMIT COMMERCIAL Model Numbers: SCUF48W series (whi te) SCUF49B series (black) Description: Commercial freez er Electrical Rating: 120V AC 60Hz Power Input: 1.5 amps Capacity: 3.1 ft3 Temperature Range: -5°F to +10°F (-20.6°C to -12.2°C) Refrigerant: R134a Shelves: 2, white, coated steel Installation: Built-in or free-standing Unit Dimensions: 23¼”W x 23¼”D x 33”H*

NOTE: Models with “ADA” included in their suf fix are 32” high

INSTALLATION

 Before Using the Freezer

• Remove the exterior and interior packing.

• Locate the appliance away from direct sunlight and sources of heat (stove,

heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extremely cold ambient temperatures may also cause the freezer not to perform properly.

• Avoid locating the appliance in moist areas.

• Before connecting the freezer to the power source, let it stand upright for

approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

• Clean the interior surface with lukewarm water using a soft cloth.

 Installing the Freezer

• The appliance is designed for built-in or recessed or free-standing

installation for indoor use. If built-in, the unit can be installed under the counter in a 24-inch-wide opening.

• Place your appliance on a floor that is strong enough to support it when it

is fully loaded. To level the unit, adjust the leveling legs.

• For free standing installation, 4 inches (102mm) of space at the top, back

and sides of the unit are suggested, which allows the proper air circulation to cool the compressor and condenser. Even for built-in installation, you should provide the following clearances to ensure the best operation and proper ventilation: at least 3/16” on both sides, 2” at the rear and 1/16” at the top. Take care that the air vent at the front of the appliance is never covered or blocked in any way.

• NOTE: Do not install this appliance in a location where the temperature

will fall below 44°F (7°C). For best performance, do not install the appliance behind a cabinet door or block the base grille.

• Plug the appliance into an exclusive, properly grounded wall outlet. Do not

under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center.

• After plugging the appliance into a wall outlet, allow the unit to cool down

for 2 to 3 hours before placing items inside the cabinet.

 Electrical Connection

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center.

• This appliance should be properly grounded for your safety. The power

cord is equipped with a three-pin plug which mates with standard three

prong wall outlets to minimize the possibility of electrical shock.

• Do not under any circumstances cut or remove the third ground prong

from the power cord supplied.

• T his freezer requires a standard 115Volts AC ~ 60Hz electrical outlet with

three-prong grounde d rece ptacle.

• To prevent accidental injury, the cord should be secured behind the

appliance and not left ex pose d or dangling.

• Never unplug the freezer by pulling the power cord. Always grip the plug

firmly and pull straight out from the receptacle.

• Do not use an extension cord with this appliance. If the power cord is too

short, have a qualified electrician or service technician install an outlet near the appliance.

 Reversing the Door Swing

This freezer has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, follow the directions below. If you have a problem, call SUMMIT Customer Service at 1-800-932-4267.

1. Take off the upper hinge cover from the door and remove the screws that

hold the top hinge.

2. Lift the hinge straight up to free the hinge pin from the socket in the top of

the door.

3. Lift the door up and away to free its bottom socket from the hinge pin.

4. Remove the screws to the bottom hinge.

5. Remove the decorative caps from the opposite side and plug the holes

from the original side with the decorative caps.

6. Remove the two screws from the front of the kick plate.

7. Move the bottom hinge to the left side and tighten it with two screws. Use

any lock washers or nuts if they were included in the original installation.

8. Replace door onto the hinge pin on the bottom hinge. Place top hinge pin

into door. Insert screws into top hinge and tighten.

9. Reinstall the kick plate and tighten the two screws. If you notice the door is not hanging straight, loosen the top hinge, adjust the

door until it is level and tighten the screws.

 Reversing the Door Handle

°C °F

88.8

set

▼

▲

Once the door opening has been reversed, it will be necessary to move the door handle to the opposite side. To do this, follow these instructions:

1. Use a Phillips head screwdriver to remove the two screws holding the

handle to the left side of the door.

2. Remove the decorative caps from the opposite side of the door and plug

the holes from the original side with the decorative caps.

3. Align the handle with the screws removed in step # 1. Tighten the screws

until the handle is firmly secured against the side of the door.

OPERATING THE FREEZER

 Turning the Freezer On and Off

The freezer turns on automatically when the power cord is plugged into a 120V AC, 60Hz electrical outlet. Similarly, it is turned off by disconnecting the power cord.

 Setting the Temperature Control

The internal temperature of this freezer is controlled by an EVK 201 digital thermostat located below the door, on the right side of the grille panel.

If you find it necessary to change the temperature setting for your digital thermostat-controlled appliance, please refer to the following instructions. The front panel of the thermostat is illustrated here:

During normal operation, the display shows the internal cabinet temperature, which is measured by a probe set onto the interior wall of the cabinet.

To see the SET POINT: The temperature at which the freezer is set to operate is called the set point.

To see what this temperature is, push and immediately release the set key. The snowflake-shaped LED will flash and the display will show the set point value. Wait 15 seconds and the inside temperatur e will display again.

To change the SET POINT: Push set and within 15 seconds, press the  or  key until the desired set

point is shown on the display. The new setting will be memorized after 15 seconds provided no other keys are pushed, or you can press the set key immediately.

+ 16 hidden pages