Page 1
High performance for instant access to
network resources
High reliability
Low chip count
Delivers 2 Gbps of bandwidth over installed
Category 5 UTP
Support for 32- and 64-bit PCI bus up to 66
MHz
Full- and half-duplex operation at 1000, 100,
and 10 Mbps
EN1407-T Gigabit Ethernet
PCI Adapter
The EN1407-T provides an excellent solution for applications that
require high-speed, reliable network connectivity on mobile
platforms. The EN1407-T supports 10Mbps, 100Mbps and
1000Mbps triple speed Ethernet operations with a single RJ-45
connector over the existing CAT-5 UTP cable.
Conforming to the IEEE 802.3u and IEEE 802.3z/ab standard, the
EN1407-T supports the auto-negotiation capability that detects the
connection speed automatically.
IP, TCP, and UDP checksum off-loading
capability to reduce CPU overhead
Features and benefits
Basic FeaturesBasic Features
•
Compliant with PCI V 2.2, 66/33MHz
operation frequency, 64/32 data transfer
bandwidth
•
Flexible/Programmable Bus Master, up to
256 DWords burst size.
•
Conforms to IEEE 802.3z/ab 1000BASE-T,
IEEE 802.3u 100 BASE-TX and comply
with IEEE 802.3 10BASE-T Ethernet
specification
•
IEEE 802.3u and 802.3z/ab Auto-
Negotiation support, Full duplex support at
both, 10, 100 and 1000Mbps operation. It is
capable of auto-negotiation to the highest
possible speed.
•
IEEE 802.3x Flow Control support.
•
Packet Propulsion bursts small packets
across the PCI bus to increase throughput
•
Intelligent interrupt management and IPV.4
checksum off-loading minimizes CPU time
•
Internal 8KB Transmit and 32KB Receive
data FIFO.
•
Remote Boot ROM supported.
•
SMT manufacturing and strict quality
assurance test to assure high performance
and reliability
Advanced FeaturesAdvanced Features
•
Jumbo Frame support boosts bulk
data transfers
•
Virtual LAN (VLAN) and long frame
support.
•
802.1D and 802.1Q priority queuing
support. Supports multiple priority
queues in both transmit and receive.
•
Support RFC 1213 (MIB II), RFC 1398
(Ether-like MIB), IEEE 802.3 LME
reducing CPU overhead for
management.
Page 2
SpecificationsSpecifications
Network Interface
• 1000BASE-T:
UTP cable; Category 5, 5e or better
• 100BASE-TX:
UTP cable; Category 5
• 10BASE-T:
UTP cable; Category 3, 4, or 5
Data Rate
•
1000 Mbps, 100 Mbps, 10 Mbps
half and full duplex
Bus Interface
•
32-bit and 64-bit bus master, PCI
•
33 MHz and 66 MHz
Interrupt
•
INTA
Cabling
•
4 pairs of Category 5, 5e or better
UTP cable: maximum 100 m (328 ft)
Temperature
• Operating 0 to 55 °C (32 to 131 °F)
• Storage -20 to 65 °C (-4 to 150 °F)
Humidity
• 5% to 95% (non-condensing)
Standards
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3x Full-Duplex flow control
• IEEE 802.1Q VLAN Tagging
• IEEE 802.1p Port Priority
• PCI v2.2
Compliances
• CE Mark
• Emissions
• FCC Class B
• VCCI Class B
• Industry Canada Class B
• EN55022 (CISPR 22) Class B
LED Indicators
•
1000, 100, and 10 Mbps link
•
Activity
•
Link
Size (without bracket)
• 7.9 x 16.5 cm (3.11 x 6.50 in.)
Weight
• 80 g (2.8 oz)
Operating Voltage
• +5 VDC @ 2.7 A maximum
Warranty
• Limited lifetime
Software Drivers
• ODI Drivers NetWare Server 4.1x or later
• NDIS Drivers Windows NT 4.0
• Windows 98
• Windows ME
• Windows 2000
• Unix Drivers Linux 2.2.X or later
1. 2003 V.02
Loading...