Page 1
EC3002S is suitable for fiber optics Fast Ethernet
LAN, FTTx, or xDSL applications. It provides fiber
optics bandwidth and link distance advantages to
the existing network infrastructures with minimum
upgrade expenses. By integrating WDM
technology into this product line, a single fiber
transports both downstream and upstream signals.
As a result of efficiently utilizing the fiber's
bandwidth, cabling and installation costs are
greatly reduced. Being fully compliant to TTC
TS-1000 standards secures the optical linkage.
The EC3002S is one of a full product line that
allows Accton to provide flexible fiber optics
solutions for enterprise-metro link, FTTx, and
xDSL applications.
EC3002S Intelligent Fast Ethernet
WDM Bi-directional Fiber Optics
Media Converter
The EC3002S is a stand-alone media converter designed to converge
between 10/100BASE-TX and 100BASE-FX cabling. Since WDM technology is
applied, only one single-mode optical fiber is required to transmit and receive
optical data. The product supports Auto-Negotiation function of link rates and
full/half duplex modes. The EC3002S has an external 4-pin piano switche,
Interface Features
which allows the customer to select between full/half duplex modes, 10/100
Mbps data rates, MDI/MDI-X data connection for the RJ45 port, or automatic
detect-and-set. The product is truly plug-and-play, and reguires no additional
setting or jumper. The product can be configured to enable or disable Auto-
MDI detect-and-set, Mac address leaning, flow-control and link-pass-through
functions. The EC3002S supports 2K MAC address table, port/tag-based
VLAN, to increase overall networking performance. The product performs
loop-back testing and satisfies all TTC TS-1000 specifications.
Features and Benefits
Key Features
•
One 10/100BASE-TX RJ-45 port
•
One 100BASE-FX WDM Bi-directional Single
Fiber Port with SC Connector
•
LED Indication of Power on/off,
Optical Link on/off, Loop Back Testing,
UTP Link on/off, UTP Port Activity,
UTP Bit Rates, UTP Full/Half Duplex
•
Programmable Maximum Ethernet Frame
Length from 1518 to 1536 bytes
•
Denying/Allowing Forwarding MAC Address
•
2K MAC Address Table with 4 Layer Hashing
Table for Automatic MAC Address Learning
•
Optional Link Pass Through Function
•
Optional Pause Frame By-Pass Function
•
Auto Negotiation
•
802.3x Flow Control
•
TTC TS1000 Compliance to Secure Optical
Linkage
IEEE Standards Compliance
•
IEEE 802.1Q VLAN
•
IEEE 802.3 Ethernet
•
IEEE 802.3u Fast Ethernet
•
IEEE 802.3x Flow Control
•
IEEE 802.3ac VLAN Tagging
Page 2
Hardware Specification
General Description
• Dimension : 35(H) X 110(W) X 180(D) mm
• Weight : 250g
• Power Consumption : 3 W maximum
• Power Supply : 1A at +12VDC (External power adapter accepting 50/60Hz 100-120V AC is included.)
• Operating Temperature : 0℃ ~ 40℃
• Storage Temperature : -20℃ ~ 70℃
• Tolerate Humidity : 10 ~ 90% RH (Non-condensing)
Electrical Interface
• Standard : 10BASE-T/100BASE-TX
• Cable : Category 5 UTP prefer
• Connector : RJ-45
Optical Interface
• Standard : 100BASE - FX
• Cable : 9/125 μm meter SM Fiber (ITU-T G.652)
• Connector: Single fiber with SC Connector
• Wavelength : Transmit 1310nm / Receive 1550nm
• Transmitting Power Range : -8 ~ -14 dBm
• Receiving Power Range : -8 ~ -30 dBm
• CE Mark
• FCC Class B
• VCCI Class B
Certification
9. 2003 V.01
Loading...