Acclaim Lighting X-Dimmer 3 Pro User Manual
X-Dimmer-3 PRO
User Instructions
Descriptions
Congratulations with your purchase of this product.
Read this manual carefully before using our X-Dimmer-3 PRO. The X-Dimmer-3 PRO, three channel (R.G.B.) LED
dimmer, is designed to set the intensity for R.G.B. LEDs, three channels can be controlled separately. Available in
online operation, DMX control mode for slave control, Manual Dim mode for master control.
Delivery Packet
Check for transport damage.
You should be in possession of the following items:
1 X-Dimmer-3 PRO
1 Manual, 1 Screwdriver & 1 connecting part
Should you discover transport damage after unpacking the equipment,
inform the hauler immediately. Never connect a damaged device. You
GND
Data -
Data +
GND
Data -
Data +
+6-2 4V
GND
DMX Add ress Se tting
ON
DMX OU T
2 1
1
DMX IN
1 2
Red
DC IN
X-D immer- 3 PRO
RS
OUTP UT
Blue
Blue
109 8 7 6
Gree n
Red
64
Addr
256
128
+6-2 4V
6A max.
Manual
Made in PRC
5
3
4
2
4
8
32
16
5
3
678 9
4
Gree n
may also contact your supplier.
X-Dimmer-3 PRO
Technical Specifications
Power Requirement
Output
Housing
Control Protocol
Connection
Operation temperature
Ingress Protection Rating
Dimensions
Weights
6~24VDC, 6A Max.
6A, Max.
Black plastic
DMX-512 (1990)
Terminal
0 degC to +40 degC
IP 20
90(L) x 40(W) x 20(H)mm
50g
Operation Guide
1.DMX Control Mode(DMX Addressing)-Slave Mode
In this mode, the dip-switch 10 is flipped to the "ON" position, DMX address
can be set and the intensity of LED is controlled. Red effect is controlled by
Ch1, Green effect is controlled by Ch2 and Blue effect is controlled by Ch3.
1 2 3 4 5 6 7 8 9 10
DMX is short for Digital Multiplex. This is a universal binary language used as a form of communication between
intelligent fixtures. Each Dip Switch represents a binary value.
ON
START
CH#
11
12
13
14
15
..
..
..
..
511
1 =
0=
OFF
1,2,4
3,4
1,3,4
2,3,4
1,2,3,4
..
..
..
..
1,2,3,4,5,6,7,8,9
Dip Switch 1 address equals 1
Dip Switch 2 address equals 2
Dip Switch 3 address equals 4
Dip Switch 4 address equals 8
Dip Switch 5 address equals 16
Dip Switch 6 address equals 32
Dip Switch 7 address equals 64
Dip Switch 8 address equals 128
Dip Switch 9 address equals 256
1 2 3 4 5 6 7 8 9 10
START
SWITCHES ON SWITCHES ON
CH#
1
2
3
4
5
6
7
8
9
10
1,2
1,3
2,3
1,2,3
1,4
2,4
1
2
3
4
1 =
0=
ON
OFF
A DMX value(address) is set by combining the different dipswitches that will add up to the value you wish to achieve,
for example:
Setting DMX address for 21.
Flip switches1,3,&5 to the
"ON" position
1=1
3=4
Dipswitches# Value
5=16
=21
Setting DMX address for 201.
Flip switches1,4,7,& 8 to the
"ON" position
1=1
4=8
Dipswitches# Value
7=64
8=128
=201
P/N:24-004-2999-00
Rev 1.3
-1-
2.Manual Control Mode-Master Mode
In this mode, the dip-switch 10 is flipped to the "OFF" position,
Flip the dip-switch 1~3 to set the intensity of Red LEDs, dip-switch
4~6 to set the intensity of Green LEDs and dip-switch 7~9 to set
the intensity of Blue LEDs. Please refer to the following table for
further information.
DipSwitch Setting
1 2 3 4 5 6 7 8 9 10
Red
Green
Blue
1 =
0=
ON
OFF
Intensity
Red
(SW1~3)
0000
10014%
01028%
11043%
00157%
10171%
01186%
111100%
Green
(SW4~6)
000
100
010
110
001
101
011
111
Blue
(SW7~9)
000
100
010
110
001
101
011
111
Note:
In online operation, only one master X-Dimmer-3 PRO is allowed in a link. The master controls the slave
X-Dimmer-3 PRO and maximum 32pcs can be controlled.
*Please Note: Improvements and specifications in the design of the unit and the manual are subject to
change without any prior written notice.
-2-
Loading...