TC-1 E/U
F
D
US VERSION
USER’S MANUAL
24 - 0 04-3040 - 0 0
Re v 1 .0
GENERAL INFORMATI O N
You made the right decision by choosing this compact and easily operation dimmer unit. Every unit has been thoroughly tested and
carefully packed before shipment. Unpack the shipping carton carefully, saving the carton and all packing materials for possible later use.
Check carefully for sure your product is not damaged and all accessories not missing. If your product appears to be damaged or missing,
please do not use it and contact your local distributor immediately.
Please read this manual carefully and thoroughly, as it gives important information regarding safety, use and maintenance. Keep this
manual with the unit for possible future reference.
PRODUCT FE ATURES
512 DMX O utpu t, all channels can be controlled by a touching f ader
Infra red remote control function available
Up to 10 ye ars st orage in memory for data
Only fo r indoor use
0-10V Analog signal output, 3 mA max
TECHNICAL SPECIFICATION
Power R equirement
Power O utpu t
Power C onsu mption
Drive C urrent
Contr ol
IP Rating
Fuse
Physi cal Dimensions
Weight
DC12- 24V
DC12- 24V
2.4W max
200mA
DMX51 2
IP20
200mA
80(L) X 1 24(W ) X 41(H) mm(US)
85(L) X 8 5(W) X 4 1(H) mm(EU)
120g( EU)/95g(US)
-1-
OPERATION GUIDE
Conne ct the device to a proper power outlet and poweron this u nit, then the TC-1 is ready for use.
1. Power bu t t on
Tap the Power button to turn on the output while this unit i s in standby status, the output
will ch ange to the desired value gradually as per the fadeti me set.
Tap the Power button to turn off the output while t his un it is on, the output will change
to zero g radually as per the fadetime set.
Keep pr essi ng the Power Button for 10s, this will allow users to cha nge the way to power
ON/OF F this u nit. Users can make it instant effort or 5s dela y, when user s elect the instant
effo rt, the device will response promptly(ON/OFF) w hen us er tap the power button,
while i t will be effective after 5s when user select th e 5s del ay.
2. Fadetime Button
Tap the F button, the corresponding indicator will l ight up, indicating that this device is
engag ed in fadetime adjusting mode,users are allowed t o set the fadetime via the fader
withi n the range of 0.01s to 10s.
Tap the D button, the Dimmer indicator will ligh t up, in dicating that this unit is engaged in
Dimme r adjusting mode,
Tap the fader upwards and downwards to set the Dimmer va lue within the range of 0%-100%.
-2-
IR Control
TC1
DI M
Befor e operating the device via the IR control, please fil l the IR controller with CR2025 battery. Refer to the
follo wing table for relevant functions.
Butto n
POWER
DIM-
DIM+
To power on/off
Decre ase the output intensity
Incre ase the output intensity
FAD E
Funct ion
FADE-
FADE+
INTEN SITY
Decre ase the fadetime, min=0.01s
Incre ase the fadetime, max=10s
Keep pr essing the key until the intensity
chang e to corresponding level
-3-
Loading...