Coffee Cup
Bluetooth Speaker
Model : SP-1078
User Guide
Enjoy your music wirelessly in great sound quality
1
Features
Operation mode select
MicroUSB socket for AUX in and
LED indicator
Accessories
Y cable X 1
User guide
For first use
Although the battery is partially charged at the factory, it is important to fully
charge the battery before first use.
Charging battery with Y cable
1. Connector MicroUSB cable to speaker
2. Plug Type A male USB connector to USB female socket
3. LED indicator light will turn to red while charging and turn off when charging
is completed.
Internal Microphone
Battery charging
OFF: Power off mode
BT: Bluetooth mode
AUX: AUX in mode
2
MicroUSB
TypeA USB
USB socket of PC / Laptop
OR
Connect to
USB adapter
Note: Battery low , LED indication Red and play notice sound every 20 seconds.
Note: The battery charging can work at all operation modes.
Power on and Pairing
1. Switch operation mode to
2. Speaker is now enter the pairing mode, please refer to your Bluetooth device manual
for pairing operation
Pairing ID is SP-1078
Password is 0000
Bluetooth mode
Bluetooth mode
*Using hands free function
When using phone to answer the call, you could answer through this speaker
microphone.
Note: If pairing fail, please switch to Bluetooth mode again.
AUX in
1. Switch operation mode to
AUX in mode
3
Connect to audio device for
example MP3 player,
Mobile
2. Speaker is now enter the AUX in mode, please connect speaker to audio device.
phone, etc...
FCC Caution: "Changes or modifications not expressly approved by the part
responsible for compliance could void the user's authority to operate the
equipment."
FCC Statement: "This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if no t inst alle d and u sed in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help."
Tablet,
4
Loading...