Page 1
Opening Detector, 5m, 2-core (white)
Art. no. MK2000W
For reliable perimeter protection
•
For protecting doors and windows
•
Page 1 of 1
The opening detector is a magnetic contact for protecting doors and windows. Unauthorised opening is detected
and reported to the alarm panel. The opening detector consists of a magnetic contact (reed) and a magnet. These
are fitted parallel, in front of, or at right angles to each other at a minimum distance of 13 mm apart. The electric
circuit of this NO opening detector is normally open (NO). If the distance between reed and magnet increases by
ca. 2 cm, the circuit is closed and an alarm reported. The optimum installation location is the middle of the door
or window frame. It can also be fitted to the bottom of the window frame if a particular window with a
magnetic contact is to be tilted open. The detector is suitable for both flush and surface-mounted installation.
The opening detector is available in white and brown.
Powered by TCPDF (www.tcpdf.org)
Technical Data:
VdS class none
Dimensions (WxHxD) 11x12x48 mm
Connections NO, max. contact capacity
100 V / 5 W / 0.05 A
Width 11 mm
Height 12 mm
Cable type 2-core
Cable length 5 m
Length 48 mm
Installation location Integration / surface
Type of detection Magnetic field
measurement
Sensor type Reed contact
Stray-field protection No
Housing material ABS
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 12/2019
mounting
Loading...