ABUS MK1010W Service Manual

Opening Detector, 4 m, 4-core (white)

Art. no. MK1010W

For reliable perimeter security

• For securing doors and windows

• For installation and assembly

• VdS certified: G 105519

•

Page 1 of 1

The opening detector is a magnetic contact for protecting doors and windows. Unauthorised opening is detected and reported to the alarm center. The opening detector consists of a magnetic contact (reed) and a magnet. These are fitted parallel, in front of, or at right angles to each other at a distance of 13 to 25 mm apart. The electric circuit of this NC opening detector is normally closed (NC). If the distance between the reed and the magnet increases, the circuit is broken and an alarm reported. The detector is tamper-protected. The optimum installation location is the middle of the door or window frame. It can also be fitted to the bottom of the window frame if a particular window with a magnetic contact is to be tilted open. The detector is suitable for both flush and surface-mounted installation. The opening detector is VdS certified and available in white and brown.

Technical Data:

Dimensions (WxHxD) 11x12x48 mm Connections NC, max. contact capacity

24 V DC / AC / 0.2 A / 4.8 W Width 11 mm Type of detection Magnetic field

measurement Stray-field protection No Housing material ABS

Cable length 4 m Length 48 mm Installation location Integration / surface

mounting Tamper monitoring Yes Sensor type Reed contact Environmental class III Certifications VdS

Height 12 mm Cable type 4-core