ABUS FUMO50020 Service Manual

Wireless Universal Module

Art. no. FUMO50020

An option which expands the range of Secvest generation wireless detectors

• Output module with 4 outputs (switching power 500 mA)

• Siren module can be used as siren sender/receiver

• Supports perimeter breach alarms, e.g. when outdoor motion detectors are used

• Converts wired systems into hybrid alarm systems

•

Page 1 of 2

Expanding Secvest's functional scopeThe Secvest wireless accessory module is an optional Secvest accessory. The wireless accessory module (WAM) can also be integrated into wired systems, such as the Terxon SX and Terxon MX, allowing additional wireless components to be used in wired alarm systems. The module has 6 main functions. The WAM is powered by a 12 V power supply unit. The wireless accessory module (WAM) can not be used with rolling code components.Repeater module (doubles the range): The WAM forwards signals from up to 8 detectors to the alarm panel, essentially doubling the wireless transmission range.Note: No repeating of the radio control unit FUBE50000, Rolling Code components and the wireless outdoor siren FUSG50100Output module (e.g. home automation):Up to 4 outputs (switching capacity 500 mA) in the WAM are activated for programmed events. Transmitter/receiver module: in addition to the 4 outputs, the alarm inputs on the WAM (1 x alarm, 1 x tampering) are utilised.Sounder module:The WAM can be used to connect an external sounder (sounder & flashing light) to the Secvest (meaning a wired sounder will also respond to wireless signals).Sounder transmitter/receiver:The WAM can be used to integrate a wireless sounder into a wired alarm system.Receiver module:Using a WAM, 8 wireless components can be integrated into any wired system. The WAM receives the signals from the wireless detector and activates the alarm system. This allows the Secvest detectors to be integrated into the Terxon alarm control panel.

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 06/2019

Wireless Universal Module

Art. no. FUMO50020

Technical Data:

VdS class none Dimensions (WxHxD) 122x208x42 mm Connections 4 x transistor relay (NO/NC),

max. switch capacity 500 mA, 24 V DC, R=2 / 1 x RJ12

for control of the siren Display 10 LEDs Battery type 6V DC, 1.2Ah Width 122 mm Radio frequency 868 MHz Transmission power 10 mW Housing material ABS Height 208 mm Length 42 mm Power consumption 0,84 W Max. run time on backup

12 h power Max. receiving range

100 m (outdoors)

Max. receiving range

30 m (building) Max. sending range

100 m (outdoors) Max. sending range

30 m (building) Modulation FM Net weight 0,33 kg Backup power supply Yes Tamper monitoring Yes Voltage monitoring Yes DC voltage supply 12 V Power consumption 70 mA Zone closure EOL, CC

Page 2 of 2