ABUS FU8380 Service Manual

Secvest 2WAY Wireless Seismic Detector

Art. no. FU8380

Suitable for monitoring walls and objects which should be stationary

• Adjustable sensitivity

• Also suitable for objects that are not supposed to be moved

• Various sensitivity levels can be set

•

Page 1 of 2

The wireless seismic detector is a component of the Secvest 2WAY and is also suitable for the Terxon with a wireless expansion module. The detector reacts to vibrations that typically occur during attempted burglary (staving, drilling, sawing, levering). These vibrations are detected and reported to the wireless alarm control panel. The wireless seismic sensor detects the vibrations of the surface on which it is mounted. The ideal places to use wireless vibration detectors are objects that should not be moved (safes, valuable objects) or broken through (wooden doors, glass panels, plaster boards, window frames). You can select different sensitivity levels on the wireless seismic detector using a jumper and a potentiometer. You can also set whether the detector triggers the alarm on the first vibration or only after several vibrations. With corresponding batteries (3 V Lithium) the wireless vibration detector has a service life of 24 months and more.

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 02/2020

Secvest 2WAY Wireless Seismic Detector

Art. no. FU8380

Technical Data:

Dimensions (WxHxD) 30x118x27 mm Battery type 3V DC lithium CR2 battery Width 30 mm Type of detection Vibration detection Adjustable sensitivity Yes Detection range of detector

5 m (m) Radio frequency 868,6625 MHz Transmission power 10 mW Housing material ABS Height 118 mm Length 27 mm Max. battery life 2 year(s) Max. operating

55 °C temperature Max. humidity 85 % Max. sending range

100 m (outdoors) Max. sending range

30 m (building)

Page 2 of 2

Min. operating temperature Modulation FM Installation location Surfaces to be monitored

Net weight 0,05 kg Tamper monitoring Yes Sensor type Piezo sensor Security level 2 Voltage monitoring Yes DC voltage supply 3 V Status display Yes Environmental class II Certifications INCERT, VSÖ, NCP

-10 °C

for shock