ABUS FU7301B Service Manual

Potential-free Glass Breakage Detector with Adhesive (brown)

Art. no. FU7301B

Potential-free glass break detector for sticking to window panes (incl. suitable adhesive)

• No operating voltage necessary

• Ideal for mechatronics components with terminal connector or using with wireless magnetic contacts

• Cable length, 2 m (2-core)

• Detection range: 2 m radius

•

Page 1 of 1

Securing windows effectively from break-ins The wire glass break detector monitors a single window with a radius of up to 2 m. The detector is secured directly to the window using the adhesive supplied.Function and important installation instructionsThe detector picks up the ultrasonic frequencies from glass breakage and reports it to the alarm panel. It is mounted between 20 and 50 mm from the window frame. Important: The detector should be attached in such a way that you notice immediately if there is no contact to the pane. The cable should not be in any danger of being damaged when the window is opened and closed. The glass break detector does not need a power supply. It is available in white (FU7301W) and brown (FU7301B).

Technical Data:

Dimensions (WxHxD) 18x18x9 mm Connections NC switch contact max.

switching voltage 15 V DC / max. switching current: 15

mA Width 18 mm Type of detection Audible Detection range of detector (m2) Housing material ABS Height 18 mm Cable type 2-core Cable length 2 m

4 m²

Length 9 mm Max. operating temperature Installation location On glass areas Net weight 0,04 kg IP protection class 65 Sensor type Piezo sensor AC voltage supply Not required V DC voltage supply Not required V

55 °C