ABtUS SPS-866B User Manual

Limited warranty

The enclosed materials are provided «as is» without warranty of any kind, either expressed or
implied, including but not limited to the implied warranties of merchant ability and fitness for a
particular purpose. The entire risk as to quality and performance of the system and enclosed
material is assumed by you

2.0 Multimedia Speaker

SAFETY PRECAUTIONS

s Do not allow AS wire connecting (including grounded ones), AS wire and amplifier package

connecting, AS wire connecting to ground, as this may cause amplifier output stages damage.

s Never push objects of any kind (needles, hair-pins, coins, insects) into this system.
s Do not put the system in damp circumstances, prevent from ingress of moisture and dust. (Do not

place flower vases and other objects on the system).

s Prevent AS from heating. (Do not install AS near heat sources and prevent it from direct sunlight).
s Do not use petrol, alcohol and other solvents when cleaning, as they may damage stained surface.

Clean only with dry soft cloth.

s In order to avoid electric shock and other accidents, never open the back cover for repair without

any professional guidance.

sIf AS do not operate, unplug it and refer to service personnel.

Notes:

The specifications may be changed without preliminary notice.

Locating

s Place the speakers symmetrically to the listeners to the distance not less then one metre.
sPort tube is located at the back panel of the speaker cabinet, please locate it about 20—30 cm

from the wall or other object.

sPlace AS far away from TV sets as picture distortion in supersensitive monitors and TV sets is

possible.

Installation and operation guide

A. Before connecting be sure that all components are switched off.
B. Connect speakers with the link cable.
C. 3.5mm audio jack of the signal cable into the output of the PC soundcard, VCD output, CD one

and so on. Then connect RCA jack of the signal cable into master speaker output (match the
colours).

D. Plug connector to power socket.
E. Adjust the volume knobs to the minimum; revolve the power button on the side of the master

speaker.

F. Adjust the volume knob to the necessary volume.
G. Adjust TREBLE and BASS knobs to desired level.

SPS-866B

sEasy access controls on the side panel,

headphone outforprivate listening

sSilk dome tweeter providesextreme details, feels

like live music

sHand crafted front panel design using special

cutting tools

Package contents

Acoustic speakers --------------------1 pcs
Signal cable --------------------------- 1pc
DC cable-------------------------------- 1pc
Operation Manual ------------------- 1pc

Specification

Output power ----------------------------2 х 20W
Voltage supply ----------------------- 230V/50Hz

Speaker units
woofer -------------------------------------------- 5"
tweeter ------------------------------------------ 1.5"

Impedance ---------------------------------- 4Ohm
Magnetic shielding -------------------------- yes

Frequence Response -------------20Hz~20KHz

Dimensions -----------W166xD233xH355mm
Weight ----------------------------------------7.6kg