Technical CAT-HDX11T/AP2 CAT-HDX112R/AP2 CAT-HDX11R/AP2
Input 1 x HDMI 1 x RJ45 1 x RJ45
(*19 pin female) 1 x IR 1 x IR
Output 1 x RJ45 2 x RJ45 1 x HDMI (*19 pin female)
1 x IR 1 x HDMI (*19 pin female)
Control port 1 x RS-232 1 x RS-232 1 x RS-232
(*3 pin Terminal block)
HDMI Compliance 1080p 60Hz 1.3
HDCP Compliance YES
Video Bandwidth Single-link 225 MHz (6.75 Gps)
Max Video Support 1080p@60Hz 36-bit color
Audio Support Surround Sound (up to7.1ch) or Stereo digital Audio
Transmitter Range Full HD (1080p) up to 100m **distance are measured base on ABtUS CAT-5e UTP cable
ESD Protection [1] Human body model ±15kV [air-gap discharge] & ±15kV ] [contact discharge]
[2] Core chipset ±8kV
PCB Stack-up 6-layer board impedance Control differential 100ohm: single 50ohm
Power Supply 5 V DC 1.5A
Operation Temperature 0~40°C [32~104°F]
Storage Temperature -20~60°C [-4~140°F]
Relative Humidity 20~90% RH [no condensation]
Mechanical
Housing Metal enclosure
Product
Dimensions (L x W x H) 112 x 70 x 30mm 112 x 70 x 30mm 112 x 70 x 30mm
Weight 240g 270g 240g
Package Include
1 x Main unit
1 x 5 V DC 1.5A Power adaptor
1 x User Manual
CAT-5 EXTENDER
1:1 HDMI over single Cat-5 extender
(Tree Chain)
Model: CAT-HDX11T/AP2
(Transmitter)
Model: CAT-HDX11R/AP2
(Receiver)
ABtUS SINGAPORE PTE LTD
Model: CAT-HDX112R/AP2
(Transceiver)
www.abtussingapore.com
User Operation Guide
PRODUCT DESCRIPTION
The ABtUS CAT-HDX11T/AP2 (Transmitter), CAT-HDX11R/AP2 (Receiver) and
CAT-HDX-112R/AP2 (Transceiver) HDMI Tree Extender allows Full HD signals to be extended
over a longer distance and larger number of displays. It can extends Full HD video, Multi channel
audio, IR and RS-232 over a single CAT-5 cable over 100m.
With the use of a transceivers, the signal can be repeated and extended over another 100m (each level).
The number of displays could also be increased with the number of transceivers used in the setup.
Ideal for any long distance signal transmitting with multiple displays showing the same image.
PRODUCT HIGHLIGHTS
Full HD 1080P video over single CAT-5
Multi Channel Audio, IR and RS-232 over single CAT-5
100m each level
Recommended extension of up to 31 displays and 500m
FRONT/BACK PANEL OVERVIEW (CAT-HDX11T/AP2)
1 2 3 4 5 6
Item Description
1. RS-232 pass through Control port
2. HDMI Input for source connection
3. LED Indicators
Item Description
4. For supply of power to device
5. IR pass through to control source device
6. CAT-5 Output connected to transceiver or receiver
FRONT/BACK PANEL OVERVIEW (CAT-HDX112R/AP2)
1 2 3
Item Description
1. IR pass through to control source device
2. RS-232 pass through Control port
3. HDMI Output to display
4. LED Indicators
4 5 6
CONFIGURATION DIAGRAM:
7 8
Item Description
5. Reset button
6. For supply of power to device
7. CAT-5 Outputs connected to receivers
8. CAT-5 Input connected from transmitter
**
FRONT/BACK PANEL OVERVIEW (CAT-HDX11R/AP2)
1 2 3 4 5 6
Item Description
1. RS-232 pass through Control port
2. HDMI Output to display
3. LED Indicators
Item Description
4. For supply of power to device
5. IR pass through to control source device
6. CAT-5 Input from transceiver or transmitter
Typical Application
Any integration that requires long distance
extension with multiple displays showing the
same image.
Public Display Systems
Airports
Shopping Malls
School Campus
**Specification are subjected to changes without notice. . . for detail and updated information please visit www.abtussinagpore.com
Loading...